Manual.ly Logo

Candy CBT6130/3X Manual

0.0 · 0 Ratings

PDF manual · 147 Pages

English

M: QW-35-FL
page

/ 147

Loading...
b868763f310198e03f5df6cdba45de459326 page 4
SAFETY INSTRUCTIONS
This manual explains the proper installation and use of your cooker hood,
please read it carefully before using even if you are familiar with the product.
The manual should be kept in a safe place for future reference.
These instructions shall also be available in an alternative format, e.g. on a
website or on request from the user in a format such as a DVD.
Never to do:
● D o not try to use the cooker hood
without the grease filters or if the filters
are excessively greasy!
●Do not install above a cooker with a
high level grill.
●Do not leave frying pans unattended
during use because overheated fats or
oils might catch fire.
●Never leave naked flames under the
cooker hood.
●If the cooker hood is damaged, do not
attempt to use.
●Do not flambé under the cooker hood.
●
CAUTION: Accessible parts may
become hot when used with cooking
appliances.
●
The minimum distance between the
supporting surface for the cooking
vessels on the hob and the lowest part
of the cooker hood. (When the cooker
hood is located above a gas appliance,
this distance shall be at least 65 cm)
●The air must not be discharged into a
flue that is used for exhausting fumes
from appliances burning gas or other
fuels.
Always to do:
● Important! Always switch off the
electricity supply at the mains during
installation and maintenance such as
light bulb replacement.
●The cooker hood must be installed in
accordance with the installation
instructions and all measurements
followed.
●All installation work must be carried
out by a competent person or qualified
electrician.
●Please dispose of the packing material
carefully. Children are vulnerable to it.
● P ay attention to the sharp edges
inside the cooker hood especially
during installation and cleaning.
●When the cooker hood is located
above a gas appliance,the minimum
distance between the supporting
surface for the cooking vessels on the
hob and the lowest part of the cooker
hood that distance must be:
Gas cookers: 75 cm
Electric cookers: 65 cm
Coal or oil cookers: 75 cm
●Make sure the ducting has no bends
sharper than 90 degrees as this will
reduce the efficiency of the cooker
hood.
●Warning: Failure to install the screws
or fixing device in accordance with
these instructions may result in
electrical hazards
●Warning: Before obtaining access to
terminals, all supply circuits must be
disconnected.
3

Chat with your Candy CBT6130/3X manual using AI

Get instant AI answers from your Candy CBT6130/3X manual

Ask anything about the Candy CBT6130/3X. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend CBT6130/3X?

Yes No

Frequently Asked Questions

A

When installed above a gas appliance, the minimum distance between the supporting surface for cooking vessels and the lowest part of the cooker hood must be at least 75 cm.

Is this answer helpful?

A

The activated carbon filter should typically be changed every three to six months, depending on your cooking habits and frequency of use.

Is this answer helpful?

A

Children aged 8 years and above can use the appliance if they have been given supervision or instruction concerning safe use and understand the hazards involved.

Is this answer helpful?

A

Check if the house fuses are blown or if the power cord is loose. If the issue persists, the globe may be broken and needs replacement according to the manual.

Is this answer helpful?

A

No, a steam cleaner is not to be used on this appliance as it may damage the surfaces or internal components.

Is this answer helpful?

A

Angle the filter into slots at the back, push the button on the handle, release the handle once it fits, and repeat for all filters.

Is this answer helpful?

A

This product must not be disposed of with household waste. It should be taken to a selective collection system for recycling in accordance with Directive 2012/19/EU.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Intuitive rocker switch controls for easy operation
  • Sleek flat screen design fits modern kitchens
  • Flexible installation options for wall or cabinet mounting
  • Automatic power disconnect when panel is closed
  • Effective grease mesh filters for easy cleaning
VS

Disadvantages

  • Requires strict adherence to minimum height clearance
  • Suction power decreases when using carbon filters
  • Ducting must be installed without sharp bends
  • Expansion pipe not included in the package
  • Bulb replacement requires professional assistance
M: QW-35-FL

Product Specification

Type

Built-in hood, Flat canopy hood

Energy efficiency class

B

Color

Stainless steel

Width

23.62 inches

Fan performance

1161.47 cu ft/h

Speed settings

2

Lighting

LED (5W)

Energy consumption

87.02 kWh/year

Fan efficiency class

D (A to G)

Lighting efficiency class

A (A to G)

Grease filter efficiency class

E (A to G)

Noise level

64 dB(A)

M: QW-35-FL

Product Description

Candy CBT6130/3X Flat Screen Extractor Hood Review

The Candy CBT6130/3X Flat Screen Extractor Hood stands as a modern solution for kitchen ventilation, blending sleek aesthetics with practical functionality. Designed to maintain air quality in your home, this unit efficiently removes odors and steam generated during cooking sessions. Its flat screen design offers a contemporary look that complements various kitchen decors while ensuring that the appliance does not dominate the space visually.

Installation is straightforward when following the provided guidelines. The hood supports both wall mounting and cabinet mounting configurations, offering flexibility for different kitchen layouts. It features a V-flap option to prevent backflow of air, ensuring that extracted fumes are directed outside effectively. The unit requires specific clearance distances from gas or electric cookers to ensure safety and optimal performance, typically ranging from 65 cm to 75 cm depending on the heat source type.

Operation is managed via intuitive rocker switches located on the front panel. Users can easily toggle the lighting system and select between two motor speeds to suit their cooking intensity. A unique feature includes an automatic power disconnect mechanism that engages when the front panel is pushed back in, adding a layer of safety and convenience. Regular maintenance involves cleaning grease mesh filters by hand and replacing activated carbon filters every three to six months to maintain suction efficiency.

Safety is paramount in the design of this extractor hood. It includes warnings about hot surfaces and fire hazards, advising users never to leave frying pans unattended or use naked flames underneath the unit. Proper installation by a qualified professional is recommended to avoid electrical hazards. The product also adheres to environmental directives regarding electronic waste, encouraging responsible disposal and recycling at the end of its lifecycle.

Key Maintenance Notes

  • Always disconnect power before cleaning or bulb replacement.
  • Use only neutral detergents to protect the stainless steel finish.
  • Ensure ducting bends do not exceed 90 degrees for maximum airflow.
  • Replace carbon filters regularly to prevent odor buildup.
M: QW-35-FL

© Copyright 2026 Manual.ly