Campagnolo Ekar 13s Ultra-Torque Carbon Manual
PDF manual · 112 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Campagnolo Ekar 13s Ultra-Torque Carbon manual using AI
Get instant AI answers from your Campagnolo Ekar 13s Ultra-Torque Carbon manual
Ask anything about the Campagnolo Ekar 13s Ultra-Torque Carbon. Answers come from this manual, with the pages they are based on.
Ekar 13s Ultra-Torque Carbon Maintenance Schedule
Check for abnormal noise, lateral play, cracks on cranks, misaligned bottom bracket cups, worn teeth, or damaged screws. Inspect chain links.
Wash with neutral soap (no pressure water), dry, degrease, and apply specific chain lubricant to prevent corrosion and wear.
Have a qualified mechanic inspect for cracks, deformation, fatigue, or wear. Frequency depends on rider weight (>82kg needs more frequent checks).
Verify that all screws are tightened to the correct torque using a torque wrench as part of periodic maintenance.
Ask a Question
Do you recommend Ekar 13s Ultra-Torque Carbon?
Yes NoFrequently Asked Questions
Riders weighing more than 82 kg (180 lbs) must inspect their bicycle more frequently for signs of fatigue, cracks, or deformation. While there is no explicit weight limit stated, heavier riders should schedule regular professional inspections to ensure safety.
Is this answer helpful?
Yes, the Ekar crankset is designed to allow chainring replacement without removing the crankset from the bike. However, it requires mechanical skill, correct tools like a Torx 30 key, and adherence to specific torque settings of 8 Nm.
Is this answer helpful?
No, the Campagnolo Ekar crankset is designed exclusively for racing, gravel, cyclocross, trekking, and assisted pedaling bicycles up to 25 km/h. Use on mountain bikes or S-pedelecs is prohibited as it compromises safety and warranty.
Is this answer helpful?
Cleaning and lubrication frequency depends on usage conditions. In severe conditions like rain, dust, or mud, clean and lube after every ride. Avoid high-pressure water which can damage seals; use mild soap and a soft cloth instead.
Is this answer helpful?
Inserting washers creates abnormal tensions in the interface area. This can lead to premature breakage of the crank arm, causing accidents, physical injuries, or even death. Never use washers in this location.
Is this answer helpful?
If the new chainring differs by 6 teeth or more from the old one (e.g., 38 to 44 teeth), the chain length must be recalculated. Changes smaller than 6 teeth do not require chain adjustment.
Is this answer helpful?
Tools from other manufacturers may not be compatible with Campagnolo components. Always verify compatibility with your mechanic or tool manufacturer before use to avoid damaging threads or bolts.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Ultra-lightweight carbon fiber construction reduces overall bike weight
- Integrated Ultra-Torque system offers superior power transfer efficiency
- Chainring can be replaced without removing the entire crankset
- Compatible with both traditional rim brakes and hydraulic disc brakes
- Designed specifically for 13-speed gravel and endurance applications
Disadvantages
- Requires specialized tools and knowledge for proper installation
- Higher cost compared to aluminum alloy alternatives
- Not compatible with non-Campagnolo 13s components
- Carbon frames require careful inspection for cracks after impacts
- Maintenance intervals must be strictly followed to ensure safety
Product Specification
Type
Crankset
Colors
black, gray
Stages
1
Mounting
Spider (4-arm)
Crank Arm Material
Carbon
Gears
13
Crank Arm Length
6.7 inches
Bolt Circle Diameter
4.84 inches
Weight
21.65 oz (6.79 inches, 38 teeth)
Product Description
Campagnolo Ekar 13s Ultra-Torque Carbon Crankset Review
The Campagnolo Ekar 13s Ultra-Torque Carbon Crankset represents a pinnacle of engineering for gravel and endurance cycling. Designed with a focus on weight reduction and stiffness, this crankset utilizes high-modulus carbon fiber arms paired with an integrated Ultra-Torque bottom bracket system. The Hirth coupling ensures precise power transfer while maintaining structural integrity under extreme load conditions typical of off-road riding.
This component is part of the broader 13-speed Ekar groupset, optimized for single-ring drivetrains that offer simplicity and reliability in mixed terrain environments. The carbon construction significantly lowers rotational mass, allowing for quicker acceleration and easier handling on technical trails. The design allows for chainring replacement without removing the crankset from the bike, a feature that enhances maintenance convenience for avid cyclists who frequently adjust their gearing based on terrain.
Safety and longevity are paramount in the Ekar design philosophy. The crankset requires strict adherence to torque specifications during installation, particularly when mounting pedals or replacing chainrings. Users must avoid using washers between the pedal axle and crank arm to prevent abnormal tension that could lead to catastrophic failure. Regular inspections for cracks, deformation, or wear are essential, especially for riders weighing over 82 kg or those operating in harsh environments like salty coastal roads or muddy tracks.
Maintenance involves careful cleaning with neutral soaps and avoiding high-pressure water jets that could compromise internal seals. Lubrication should be performed regularly using specific chain oils, ensuring that no residue reaches braking surfaces. The integration of this crankset into the Campagnolo ecosystem guarantees optimal performance, but mixing components from other manufacturers is strongly discouraged to preserve warranty and safety standards.
Notes
- Always use original Campagnolo spare parts to maintain system integrity.
- Inspect components more frequently if you weigh over 82 kg.
- Avoid night riding without proper lighting and reflective gear.
- Do not expose carbon parts to direct sunlight or high heat sources.
Search for 67,706 Manuals online
Type-in Brand or Model