Manual.ly Logo

Cameo Phantom F3 Manual

0.0 · 0 Ratings

PDF manual · 40 Pages

English

M: QW-35-FL
page

/ 40

Loading...
0d1b009a9a5898d5ee0fcdd2f928df62b168 page 3
3
DEUTSCHFRANCAIS
ESPAÑOL
ENGLISH
ITALIANO POLSKI
ENGLISH
YOU HAVE MADE THE RIGHT CHOICE!
This device was developed and produced under the highest standards of quality in order to ensure smooth operation for many years. Please
read these operating instructions carefully so that you can use your new Cameo Light product quickly and optimally. You can find more
information on Cameo Light on our website WWW.CAMEOLIGHT.COM.
SAFETY INFORMATION
1. Please read through these instructions carefully.
2. Store all information and instructions in a secure location.
3. Follow the instructions.
4. Heed all warnings. Do not remove any safety warnings or other information from the device.
5. Use the device only in the intended manner.
6. Use only stable and suitable stands and/or mounts (for fixed installations). Make sure that wall mounts are properly installed and secured.
Make sure that the device is securely installed and will not fall.
7. During installation, heed all safety provisions that apply in your country.
8. Do not install and operate the device in the vicinity of heaters, heat reservoirs, ovens, or other heat sources. Make sure that the device is
installed in such a way that it is sufficiently cooled and will not overheat.
9. Do not place any ignition sources, e.g. candles, on the device.
10. Do not block the ventilation slits.
11. The device was designed to be used only in interior spaces, do not operate the device in the direct vicinity of water (this does not apply
to specialty outdoor devices - in this case, please note the special instructions given in the following). Do not bring the device into contact
with combustible materials, fluids, or gases.
12. Make sure that no water can drop or splash into the device. Do not place any containers filled with fluids, such as vases or drinking
vessels, onto the device.
13. Ensure that no objects can fall into the device.
14. Operative the device using only those accessories recommended and specified by the manufacturer.
15. Do not open the device, and do not modify it.
16. After connecting the device, inspect all cable paths in order to avoid damage or accidents, such as those caused by tripping over said cables.
17. During transport, ensure that the device will not fall and potentially cause material damage and personal harm.
18. If your device no longer functions properly, fluids or objects have made their way into the device interior, or the device is otherwise
damaged, switch it off immediately and remove it from the power outlet (provided the device is active).
This device is to be repaired only by authorized specialists.
19. Use a dry towel to clean the device.
20. Follow all laws on disposal applicable in your country. Please separate plastic and paper or cardboard when disposing of the packaging.
21. Plastic bags must be kept out of reach of children.
FOR DEVICES CONNECTED TO A POWER SUPPLY:
22. ATTENTION: If the device power cable is equipped with a ground pin, it must be inserted into an outlet with a grounding conductor. Never
disable the grounding conductor of a power cable.
23. Do not immediately switch on the device when it has been exposed to stark temperature deviations (for example after transport).
Humidity and condensation could damage the device. Switch on the device only when it has reached room temperature.
24. Before you connect the device to the outlet, first ensure that voltage and frequency of the power supply complies with the values given
on the device. If the device has a voltage selector switch, connect the device to the outlet only if the device values comply with the values of
the power supply. If the provided power cable or power adapter does not fit your power outlet, contact an electrician.
25. Do not step on the power cable. Make sure that live cables, in particular those at the power socket or at the power adapter and the
device socket, are not bent.
26. With regard to the device cables, always make sure that the power cable or power adapter is always freely accessible. Always separate
the device from the power supply when the device is not in use or when you would like to clean the device. Always unplug the power cable
and power adapter from the power outlet using the plug or adapter, not the cord. Never touch the power cable and power adapter with wet hands.
27. If possible, do not switch the device on and off quickly because this may impair the service life of the device.
28. IMPORTANT INFO: Replace fuses only with fuses of the same type and value. If a fuse trips repeatedly, please contact an authorized
service center.
29. In order to completely separate the device from the power supply, remove the power cable or power adapter from the outlet.
30. If your device is equipped with a Volex power cord, release the correct Volex device connector before removing the cord. However, this
also means that the device may slide and fall when removing the power cord, which may cause personal harm and/or material damage.
Therefore, always lay cables carefully.
31. Remove the power cable and power adapter from the outlet when there is a risk of lighting or when you no longer want to use the device.
32. The device may only be installed when it carries no voltage (separate the power plug from the power supply).
33. Dust and other debris within the device may damage it. The device should be serviced or cleaned regularly by qualified specialists
depending on the environmental conditions (dust, nicotine, smoke, etc.) in order to avoid overheating.
34. The distance to combustible materials must be at least 0.5 m.
35. Power cables for powering multiple devices must have a core cross-section of at least 1.5 mm². In the EU, lines must be H05VV-F or
similar. Adam Hall provides suitable cables. Using these cables, you can connect multiple devices via the Power Out connection with the
Power In connection of another device. Ensure that the total power consumption of all connected devices does not exceed the specified
value (printed on the device). Be sure to keep power lines as short as possible.

Chat with your Cameo Phantom F3 manual using AI

Get instant AI answers from your Cameo Phantom F3 manual

Ask anything about the Cameo Phantom F3. Answers come from this manual, with the pages they are based on.

Phantom F3 Maintenance Schedule

Every 60 operating hours
Clean the vaporizer system

Use special Cameo cleaning fluid to remove residue and ensure long service life. Follow instructions on the bottle label.

Regularly
Check fog fluid level

Inspect the canister level via the window at regular intervals and refill if necessary. Unplug device before filling.

As needed based on environment
Professional device servicing

Have qualified specialists clean or service the device regularly depending on dust, nicotine, or smoke conditions to avoid overheating.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Phantom F3?

Yes No

Frequently Asked Questions

A

No, always use water-based fog fluid from Cameo. Oil based fluids pose an explosion risk and can damage the machine.

Is this answer helpful?

A

The unit requires approximately four minutes to heat up the evaporator before the READY light turns green.

Is this answer helpful?

A

No, this device is designed for indoor use only and must be kept away from water and damp conditions.

Is this answer helpful?

A

Maintain a minimum distance of 50 centimeters from the output nozzle to avoid burns from hot fog.

Is this answer helpful?

A

Use the 5-pin DIN remote socket to connect the cable remote or the radio receiver for RF control.

Is this answer helpful?

A

Clean the vaporizer system every 60 operating hours using special cleaning fluid to ensure longevity.

Is this answer helpful?

A

It operates at 230V AC / 50Hz. Ensure your supply voltage matches the device label to prevent damage.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High output volume of up to 240 cubic meters per minute for large effects
  • Includes both cable and RF remote controls for versatile operation
  • Uses water based fluid which is safer than oil based alternatives
  • Built with safety features and no user serviceable internal parts
  • Durable metal housing designed for professional event environments
VS

Disadvantages

  • Indoor use only limits application in direct exposure to rain or elements
  • Requires a significant cool-down time before moving the unit after use
  • No user serviceable parts means repairs require qualified technicians only
  • Hot nozzle creates a burn hazard requiring strict distance management
  • Heat up phase takes approximately four minutes before fog is ready
M: QW-35-FL

Product Specification

Type

Fog Machine

Power

950 W

Warm-up Time

3 min

Output Volume

8475.53 CFM

Throw

13.12 ft

Fluid Consumption

1.35 fl oz/min

Fluid Tank Capacity

27.05 fl oz

Features

Overheat Protection

Mounting

Carrying Handle

Dimensions

7.48" x 5.59" x 10.63" (WxHxD)

Weight

9.70 lbs

M: QW-35-FL

Product Description

Experience Professional Atmosphere with the Cameo Phantom F3

Creating the perfect ambiance for events requires reliable equipment that delivers consistent results without complexity. The Cameo Phantom F3 compact fog machine stands out as a robust solution for event technology professionals seeking high performance in a portable package. Designed by Cameo Light, a brand under the Adam Hall Group, this device ensures smooth operation for years when used correctly. Understanding its capabilities is essential, which is why referring to a comprehensive Cameo Phantom F3 Manual is highly recommended before your first event setup to avoid operational errors.

This fog machine operates exclusively on water-based fog fluids, guaranteeing safety and reducing residue compared to older oil-based alternatives. It features a powerful 970-watt heating element that preheats the evaporator in approximately four minutes. Once the green READY light illuminates, the unit is ready to deploy up to 240 cubic meters of fog per minute. The reach of the fog output extends roughly four meters, making it ideal for stages, nightclubs, and parties. Control flexibility is achieved through included accessories: a cable remote control with a 4.3-meter line and an RF remote control capable of managing up to four units independently using unique addresses. Display LEDs clearly signal the heat-up and ready statuses to prevent user confusion.

Safety is paramount in the design philosophy of Cameo to protect both the operator and the environment. The housing contains no user-serviceable parts to prevent electric shock risks from high voltage components. Proper ventilation is critical, as the exhaust nozzle becomes very hot during operation and requires a ten-minute cool-down period before handling. Users must maintain a minimum distance of 50 centimeters from the nozzle to avoid burns from hot fluid. Additionally, the device is intended for indoor use only and must be placed at least 0.5 meters away from combustible materials to prevent fire hazards. The sinter filter at the intake hose protects the system from contaminant particles, ensuring longevity even in dusty environments.

Installation involves placing the unit firmly on its rubber feet or mounting it to a safety-rated crossbeam using optional hardware. Before filling the canister, always disconnect the device from power to avoid accidents involving spills or burns. Regular cleaning every 60 operating hours is advised to remove fluid residue from the vaporizer system. The device complies with European safety directives including Low Voltage and EMC standards. It operates at 230 volts AC. Physical dimensions measure 190 by 142 by 270 millimeters with a weight of 4.4 kilograms without the fluid canister. Ensure voltage frequency matches your local power grid to prevent damage from fluctuating electrical supplies.

Notes

Always disconnect power before maintenance. Keep away from children. Use proper safety cables for overhead installs.

M: QW-35-FL

© Copyright 2026 Manual.ly