Manual.ly Logo

Caberg Duke II Legend Manual

0.0 · 0 Ratings

PDF manual · 16 Pages

English

M: OA-GPT-54-NAN
page

/ 16

Loading...
fdb2b619d322836d771adf6eeb6c75154909 page 6
DUKE
Your helmet DUKE thanks to the double homologation P/J can be used in 2 confi-
gurations (chinguard closed “P” and chinguard open “j”)
Lever P/J
When the P/J lever is positioned on “J” it is possible to block the chinguard in the
open position (Fig.1). The selection on the position “J” can be done before the ope-
ning of the chinguard.
WARNING! In this position it is not possible to close the chinguard. Do not
force the closure as this could cause damages to the closing mecha-
nism of the helmet.
To be able to close the chinguard it is necessary to move the P/J lever
to the “P” position.
When the lever P/J is positioned on “P” the chinguard can be opened and closed (Fig.2)
WARNING!
The level of protection of this helmet is in function of the configuration adopted by
the user: full protection with the chinguard closed and partial protection when the
chinguard is open.
Whilst on the move do not ride with the chinguard in the open postion if
the P/J lever is not positioned in the configuration “J”
1. HOW TO FIX AND REMOVE THE CLEAR VISOR
1.1 Open the visor until the arrow on the ground plate and the arrow on the visor
meet. Press button A towards the back of the helmet and detach the visor (Fig.3)
1.2 Repeat the same process on the other side and remove the visor.
To assemble back the visor, repeat the above process in inverse order
2. INSTRUCTION TO REMOVE THE SMOKED VISOR
2.1 Drive forward the top lever to remove the smoked visor (Fig.4)
2.2 Demount the smoked visor putting up with a flat screwdriver the slider which
fix it to the lever (Fig.5)
2.3 Release the smoked visor by pulling slightly outward (Fig.6)
3. INSTRUCTION TO ASSEMBLE THE SMOKED VISOR
3.1 Clip the smoked visor accommodating its side parts into their seating slightly
pressing. (Fig.7)
3.2 Drive forward the top lever (Fig.4)
3.3 Drive the smoked visor inside till to fix it to the slider (Fig.7)
4
ENG
CABERG CASCO DUKE NERO:CASCO RYNO 4-10-2011 17:47 Pagina 3
onfi-
n the
ope-
not
cha-
ever
Fig.2)
d by
n the
on if
visor
Fig.3)
hich
ghtly
5
ENG
WARNING: Never use the smoked visor during the night or with scarce visibility condition
WARNING: Any adjustments to the smoked visor must be done with the two-whee-
ler in still position
4. REMOVING/FIXING THE OPENING CHIN GUARD
The chin guard on this helmet can be removed to make it easier to clean the
various mechanisms.
4.1 Repeat steps 1.1.
4.2 Unscrew the screw B (Fig.8).
4.3 Release the opening chin guard.
Repeat the above steps in the reverse order to return the opening chain guard
to its original position.
CAUTION! Never use the helmet without the chin guard.
5. REMOVING THE WASHABLE INTERNAL LINING
You can start to remove the internal padding from either the right or left cheek.
5.1 With the chin guard raised, remove the cheek pad by detaching the
studs at the back. Then repeat for the other side (Fig.9).
5.2 Extract the cheek pad by extracting it from the chin strap through the slot. Then
repeat for the other side.
5.3 Starting from the neck protection, release the lining by pulling slightly towards
the inside of the helmet (Fig.10).
Still pulling slightly, detach the front fixing strips from the support fixed to the
shell.
5.4 Now extract all the lining from the helmet.
CLEANING THE WASHABLE LINING
• Scrub by hand with neutral soap and water (max 30° C).
• Rinse with cold water. Do not wring. Dry at room temperature.
CAUTION! Never wash the lining in the washing machine. Never use petrol or
other solvents to clean the lining.
6. FITTING THE WASHABLE INTERNAL LINING
6.1 Place the internal lining in the helmet.
6.2 Introduce left-hand fixing strip C between the polystyrene of the helmet and
the shell (Fig.11). Repeat the operation for the right-hand fixing strip.
6.3 Introduce and attach the front fixing strips to the support fixed on the shell (Fig.12).
6.4 Introduce the fixing strips in the neck area between the polystyrene of the hel-
met and the shell (Fig. 13).
6.5 Insert the chin strap in the slot in the cheek pad. Repeat for the other cheek.
6.6 Attach the cheek pads by pressing the studs at the back (Fig.9).
CAUTION! You must always stop your bike before opening/closing thechin guard.
CABERG CASCO DUKE NERO:CASCO RYNO 4-10-2011 17:47 Pagina 4
DUKE
Your helmet DUKE thanks to the double homologation P/J can be used in 2 confi-
gurations (chinguard closed “P” and chinguard open “j”)
Lever P/J
When the P/J lever is positioned on “J” it is possible to block the chinguard in the
open position (Fig.1). The selection on the position “J” can be done before the ope-
ning of the chinguard.
WARNING! In this position it is not possible to close the chinguard. Do not
force the closure as this could cause damages to the closing mecha-
nism of the helmet.
To be able to close the chinguard it is necessary to move the P/J lever
to the “P” position.
When the lever P/J is positioned on “P” the chinguard can be opened and closed (Fig.2)
WARNING!
The level of protection of this helmet is in function of the configuration adopted by
the user: full protection with the chinguard closed and partial protection when the
chinguard is open.
Whilst on the move do not ride with the chinguard in the open postion if
the P/J lever is not positioned in the configuration “J”
1. HOW TO FIX AND REMOVE THE CLEAR VISOR
1.1 Open the visor until the arrow on the ground plate and the arrow on the visor
meet. Press button A towards the back of the helmet and detach the visor (Fig.3)
1.2 Repeat the same process on the other side and remove the visor.
To assemble back the visor, repeat the above process in inverse order
2. INSTRUCTION TO REMOVE THE SMOKED VISOR
2.1 Drive forward the top lever to remove the smoked visor (Fig.4)
2.2 Demount the smoked visor putting up with a flat screwdriver the slider which
fix it to the lever (Fig.5)
2.3 Release the smoked visor by pulling slightly outward (Fig.6)
3. INSTRUCTION TO ASSEMBLE THE SMOKED VISOR
3.1 Clip the smoked visor accommodating its side parts into their seating slightly
pressing. (Fig.7)
3.2 Drive forward the top lever (Fig.4)
3.3 Drive the smoked visor inside till to fix it to the slider (Fig.7)
4
ENG
CABERG CASCO DUKE NERO:CASCO RYNO 4-10-2011 17:47 Pagina 3
onfi-
n the
ope-
not
cha-
ever
Fig.2)
d by
n the
on if
visor
Fig.3)
hich
ghtly
5
ENG
WARNING: Never use the smoked visor during the night or with scarce visibility condition
WARNING: Any adjustments to the smoked visor must be done with the two-whee-
ler in still position
4. REMOVING/FIXING THE OPENING CHIN GUARD
The chin guard on this helmet can be removed to make it easier to clean the
various mechanisms.
4.1 Repeat steps 1.1.
4.2 Unscrew the screw B (Fig.8).
4.3 Release the opening chin guard.
Repeat the above steps in the reverse order to return the opening chain guard
to its original position.
CAUTION! Never use the helmet without the chin guard.
5. REMOVING THE WASHABLE INTERNAL LINING
You can start to remove the internal padding from either the right or left cheek.
5.1 With the chin guard raised, remove the cheek pad by detaching the
studs at the back. Then repeat for the other side (Fig.9).
5.2 Extract the cheek pad by extracting it from the chin strap through the slot. Then
repeat for the other side.
5.3 Starting from the neck protection, release the lining by pulling slightly towards
the inside of the helmet (Fig.10).
Still pulling slightly, detach the front fixing strips from the support fixed to the
shell.
5.4 Now extract all the lining from the helmet.
CLEANING THE WASHABLE LINING
• Scrub by hand with neutral soap and water (max 30° C).
• Rinse with cold water. Do not wring. Dry at room temperature.
CAUTION! Never wash the lining in the washing machine. Never use petrol or
other solvents to clean the lining.
6. FITTING THE WASHABLE INTERNAL LINING
6.1 Place the internal lining in the helmet.
6.2 Introduce left-hand fixing strip C between the polystyrene of the helmet and
the shell (Fig.11). Repeat the operation for the right-hand fixing strip.
6.3 Introduce and attach the front fixing strips to the support fixed on the shell (Fig.12).
6.4 Introduce the fixing strips in the neck area between the polystyrene of the hel-
met and the shell (Fig. 13).
6.5 Insert the chin strap in the slot in the cheek pad. Repeat for the other cheek.
6.6 Attach the cheek pads by pressing the studs at the back (Fig.9).
CAUTION! You must always stop your bike before opening/closing thechin guard.
CABERG CASCO DUKE NERO:CASCO RYNO 4-10-2011 17:47 Pagina 4

Chat with your Caberg Duke II Legend manual using AI

Get instant AI answers from your Caberg Duke II Legend manual

Ask anything about the Caberg Duke II Legend. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Duke II Legend?

Yes No

Frequently Asked Questions

A

Its biggest strength is versatility. The P/J system lets you ride with the chin guard closed for full protection or open for a more relaxed, practical setup. That makes it useful for commuting, touring, and everyday riding.

Is this answer helpful?

A

The helmet has two configurations. In position P, the chin guard can be opened or closed. In position J, the chin guard stays locked in the raised position. You should switch modes only when the vehicle is stopped.

Is this answer helpful?

A

No. The smoked visor is intended for daytime or better-visibility conditions. It should not be used at night or when visibility is poor, because it can reduce how well you see the road.

Is this answer helpful?

A

Yes. The internal lining can be removed and cleaned. It should be washed by hand with neutral soap at a maximum of 30°C, then rinsed in cold water and air-dried. It should never go in a washing machine.

Is this answer helpful?

A

Yes, the chin guard can be removed for cleaning and maintenance. However, the helmet should never be used without the chin guard installed, as that would compromise safe use.

Is this answer helpful?

A

Always make adjustments while the vehicle is stopped. This applies to the visor, smoked visor, and chin guard. Following that rule helps prevent damage and improves safety during use.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Dual P/J homologation offers open or closed riding modes for different conditions.
  • Clear and smoked visors add useful visibility options and better day-to-day comfort.
  • Washable internal lining makes routine cleaning easier and supports long-term freshness.
  • Various sizes improve the chance of a secure, personalized fit.
VS

Disadvantages

  • Smoked visor should not be used at night or in low visibility, limiting its use.
  • Chin guard adjustments must be done only when stationary, which reduces convenience on the go.
  • Incorrect P/J positioning can affect protection and may damage the closing mechanism.
  • The washable liner requires hand washing only, so cleaning takes more care than machine-wash gear.
M: OA-GPT-54-NAN

Product Specification

Type

Modular helmet

Features

integrated sun visor

Weight

3.42 lb

M: OA-GPT-54-NAN

Product Description

Caberg Duke II Legend Red (Various Sizes) Manual

The Caberg Duke II Legend Red is designed for riders who want flexibility without giving up everyday comfort. Its standout feature is the P/J dual homologation, which means the helmet can be used in two different configurations: with the chin guard fully closed for maximum protection, or lifted for a more open, touring-friendly feel. That versatility makes it a strong choice for commuting, city rides, and longer journeys where conditions can change quickly.

What makes this model especially appealing is how practical it feels in use. The helmet includes a clear visor for full visibility and a smoked visor for brighter conditions, giving riders more control over glare and comfort. The chin guard can be opened or removed according to the instructions, and the internal lining is fully washable, helping the helmet stay fresh over time. With the Caberg Duke II Legend red (various sizes) Manual in mind, the design clearly focuses on usability, maintenance, and safety.

The red Legend finish adds a bold visual identity, while the availability in various sizes helps riders find a more precise fit. That matters because fit is not just about comfort; it directly affects stability and protection. The helmet’s modular layout also makes it easy to adapt to weather, road speed, and personal preference. When closed, it offers a more enclosed riding experience. When opened, it provides extra airflow and convenience during slower rides or stops.

Maintenance is straightforward, but the instructions emphasize care and caution. The smoked visor should not be used at night or in low visibility, and every adjustment to the visor or chin guard should be done while the vehicle is stopped. The washable liner should be cleaned by hand with mild soap and cold water, never in a washing machine. These notes help preserve both performance and longevity.

Notes

  • Always check the P/J lever position before riding.
  • Never force the chin guard closed in the wrong setting.
  • Clean the lining gently to avoid damage.
  • Use the smoked visor only in suitable daylight conditions.

Quick take

A versatile modular helmet with thoughtful features, strong everyday practicality, and clear maintenance guidance for riders who value comfort and adaptability.

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly