Brumberg KACIE Micro Manual
PDF manual · 14 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Brumberg KACIE Micro manual using AI
Get instant AI answers from your Brumberg KACIE Micro manual
Ask anything about the Brumberg KACIE Micro. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend KACIE Micro?
Yes NoFrequently Asked Questions
The spotlight is available in warm white (3000 K) and neutral/cool white (4000 K) depending on the product code variant.
Is this answer helpful?
Some variants are switchable while others support DALI dimming. Check the specific article number (12560xxx = switchable; 12562xxx = DALI) before purchase and ensure a compatible driver and control system.
Is this answer helpful?
No. The product is rated IP20 and is intended for dry, indoor ceiling installations only. Do not use it in wet or exposed outdoor environments.
Is this answer helpful?
Connect the LED driver to the mains L (phase) and N (neutral). If the driver requires earthing (not all protection class II drivers do), connect PE (green/yellow). Ensure the driver input voltage matches the supply and secure all connections with strain relief.
Is this answer helpful?
The recommended ceiling aperture is approximately 120 mm. Mount the luminaire to a stable, load-bearing, non-flammable ceiling and verify the ceiling’s suitability before installation.
Is this answer helpful?
Isolate power before cleaning. Use a soft, dry cloth to remove dust from the housing and glass. Do not use water or solvents. Regular checks ensure connectors remain tight and the driver operates within its specified temperature range.
Is this answer helpful?
System power is about 11 W. Lumen output varies by variant: about 801 lm for some codes and around 850 lm for others—refer to the exact article number for precise values.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- High color rendering (CRI > 90) for natural color reproduction.
- Efficient 11 W system with lumen outputs around 801–850 lm.
- Compact recessed design with 65° beam ideal for accent and task lighting.
- Available with DALI dimming on select variants for flexible control.
- Aluminum housing and clear glass with high-gloss reflector for effective thermal and optical performance.
Disadvantages
- Rated IP20 — unsuitable for wet or outdoor locations.
- Requires qualified electrician for safe installation and proper driver matching.
- Not designed for series wiring; must be paralleled with like units.
- Energy efficiency class G (A–G scale) for integrated light source.
- Fixed beam (non-rotatable/non-swiveling) limits directional adjustability.
Product Specification
Type
Recessed luminaire, Spot, Downlight
Permanently installed LEDs
yes
Socket
no
Total power
11W
Material
Aluminum, Steel, Plastic
Design
round
Protection class
IP20
Safety class
2
Dimensions
5.31 in (diameter)
Product Description
Brumberg KACIE Micro LED Recessed Spotlight
The Brumberg KACIE Micro LED Recessed Spotlight is a compact, high-quality LED downlight designed for indoor ceiling installation. Engineered for reliability and consistent performance, it delivers focused white illumination with excellent color rendering (CRI > 90) and selectable color temperatures (3000 K or 4000 K). Built from aluminum with a clear glass element and a high-gloss reflector, the fixture offers a narrow beam (approx. 65°) ideal for accent, task, and general lighting in residential and commercial interiors.
This model series includes variants with different lumen outputs (~801 lm and ~850 lm) and is rated for 230 V AC operation at around 11 W system power. The luminaire is IP20 and intended for dry, indoor use, mounted directly to stable, non-flammable ceilings. With protection class II for the driver and class III assignment for the luminaire against electric shock when applicable, the spotlight supports safe parallel connection with like units (not series wiring). Certain variants support DALI dimming for advanced control, while others are switchable.
Installation is straightforward for qualified electricians: cut a ~120 mm ceiling aperture, secure the fixture to a supportive ceiling, and connect the LED constant-current driver to the supply (L, N, and protective earth when required). The product requires adherence to the specified input voltage on the driver and torque-secure electrical connections; strain relief of loose conductors is recommended. After installation, restore power and verify correct operation. The light is designed for downward, glare-conscious mounting and must be used within the declared ambient temperature range.
Durability and maintenance are practical: aluminum housing helps heat dissipation, and the LED source offers long operational life when used per instructions. Clean the fixture with a soft, dry cloth and ensure the supply is isolated before any maintenance. Avoid using the spotlight outdoors or in wet environments and do not modify the product or use non-approved parts.
Notes:
- Suitable for direct mounting on normal flammable surfaces if ceiling load capacity is confirmed.
- Not for series connection of products; connect units in parallel only.
- Some driver types (protection class II) have no earth terminal; follow driver labeling.
- Observe IP20 limitation — indoor, dry locations only.
Search for 67,706 Manuals online
Type-in Brand or Model