Manual.ly Logo

Britax Romer Kidfix i-Size Manual

0.0 · 0 Ratings

PDF manual · 116 Pages

English

M: QW-35-FL
page

/ 116

Loading...
dd3cfe8850804235b48d31347e8347f5fd73 page 45
5 6
EN
07
Red release button
08
Locking button
09
ISOFIX locking arms
10
Adjustment button
11
ISOFIX adjustment button
12
Dark-green belt guide
13
Light-green belt holder
14
Headrest
01
Diagonal belt
02
Lap belt
03
Seat belt lock
04
Insertion aid
05
ISOFIX installation bracket
06
Green area
WARNING! This operating manual and the separate are compo-
nents of the product and contribute to its safe use. Non-compliance
may lead to serious or even fatal injuries. If in doubt, do not use
product and immediately contact your retailer.
Intended use
This product has been designed, tested and certified according to the
requirements of the European Standard for Child Safety Equipment
UNECE R129/03.
Height of child: 100 cm – 150 cm
In some vehicles, the headrest of the child seat cannot be fully extended
due to lack of space. Use the child seat in these vehicles only for child
sizes between 100 cm and 135 cm.
This product is designed exclusively for securing a child in a vehicle.
The product is approved for use both with and without the following
components: XP-PAD, SecureGuard and SICT-Element.
This approval is invalidated if you make any modifications to this
product. Changes may only be made by the manufacturer. The stickers
on the product are an important component of the product.
Do not make any changes.
Do not remove stickers.
) The following applies to KIDFIX i-SIZE: the only modification allowed
is removal of the SecureGuard, the XP-PAD or the SICT element.
Check fastening before each car journey:
□ The lap belt sits in the left and right dark-green belt guides.
□ The lap belt sits as low as possible over the child’s hips on both
sides.
□ The diagonal belt sits in the dark-green belt guide on the side of the
seat belt lock.
□ The diagonal belt sits in the light-green belt guide.
□ The diagonal belt leads diagonally to the back from the child seat.
□ The vehicle seat lock is neither in nor in front of the dark-green belt
guide.
□ The seat belt is pulled tight and not twisted.
□ The child is correctly strapped in.
In addition, for the KIDFIXi-SIZE, please also note:
□ The lap belt is in the SecureGuard.
□ The diagonal belt is not in the SecureGuard.
□ The SICT element and the XP-PAD are installed correctly.
When using ISOFIX, please also note:
□ The green area is visible on both ISOFIX locking arms.
Cleaning and care
Clean plastic parts with soapy water.
Do not use abrasive cleaning agents (e.g. solvents).
Disposal
Observe the disposal regulations in your country.
Do not dismantle product.

Chat with your Britax Romer Kidfix i-Size manual using AI

Get instant AI answers from your Britax Romer Kidfix i-Size manual

Ask anything about the Britax Romer Kidfix i-Size. Answers come from this manual, with the pages they are based on.

Kidfix i-Size Maintenance Schedule

Before each journey
Check seat fastening and belt routing

Verify lap and diagonal belts are in correct guides, tight, not twisted, and child is correctly buckled before every car trip.

Show in the manual (page 69)
Regularly
Inspect important parts for damage

Regularly check all important parts for damage. Ensure mechanical components work properly. Never lubricate or oil parts.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Kidfix i-Size?

Yes No

Frequently Asked Questions

A

If the accident involves an impact speed over 10 km/h, you must replace the product immediately. Even if no damage is visible, internal structural integrity may be compromised, posing a serious risk in future collisions.

Is this answer helpful?

A

Never leave a child unsupervised in the vehicle. Temperatures can rise dangerously fast, and leaving a child alone creates significant safety risks regardless of the seat's quality.

Is this answer helpful?

A

No, thick clothing should be avoided as it creates slack in the straps, negatively impacting the protective function of the seat. Dress the child in thin layers instead.

Is this answer helpful?

A

Using the seat without the cover is extremely dangerous. The cover is an integral safety component, and its absence can lead to severe or fatal injuries during an accident.

Is this answer helpful?

A

Check your vehicle manual to see if removing the headrest is allowed. If yes, remove it according to instructions and reinstall it once the car seat is no longer needed. If prohibited, choose a different seating position.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Comprehensive safety features including protection against hidden damage after accidents.
  • Clear guidelines on preventing burns from hot components caused by sun exposure.
  • Emphasis on proper installation to avoid risks associated with incorrect fitting.
VS

Disadvantages

  • Requires strict adherence to avoiding two-point seat belts which limits compatibility.
  • Seat cover cannot be removed without compromising safety integrity.
  • May require removal of vehicle headrests which might not be allowed in all cars.
M: QW-35-FL

Product Specification

Group

i-Size

Weight Class

15-36kg

Age Group

3.5-12Y

Harness System

3-point safety belt

Installation

forward-facing

Isofix

yes

Features

height-adjustable headrest, side impact protection, removable/washable cover, installation indicators, ventilation system

Dimensions (WxDxH)

480x630-830x420mm

Weight

14.77lbs

M: QW-35-FL

Product Description

Britax Römer Kidfix i-Size 2020/2021: A Comprehensive Safety Guide

The Britax Römer Kidfix i-Size 2020/2021 stands as a premier choice for child safety, designed to protect young passengers within the height range of 100 to 150 cm. This advanced car seat integrates robust engineering with user-centric design to ensure maximum security during every journey. The product is built upon strict safety standards, emphasizing the importance of correct installation and usage to prevent severe or fatal injuries.

Safety begins with understanding the environment in which the seat operates. Direct sunlight can cause components to heat up significantly, posing a burn risk to sensitive child skin. Therefore, it is crucial to shield the seat from intense solar radiation when not in use. Additionally, the moving backrest presents a crushing hazard; users must keep fingers clear while adjusting the recline angle to avoid injury. The seat is not a toy and should never be used in a free-standing position, even for testing purposes.

Installation accuracy is paramount. The seat must only be secured using a three-point belt system, never a two-point belt. Improper installation can lead to catastrophic failure during an accident. If the vehicle seat features a belt airbag, specific accessories like the XP-PAD and SecureGuard must not be used. Furthermore, the seat requires full contact with the vehicle seat surface. If a headrest obstructs this fit, it may need removal if permitted by the vehicle manual, or a different seat location should be chosen.

During travel, temperature fluctuations inside a vehicle can become dangerous rapidly. Children should never be left unattended, and boarding or exiting should always occur from the sidewalk side to avoid traffic hazards. Regular breaks on long journeys allow children to move and play safely. Slack straps are another critical concern; loose belts reduce protective function, so checking that straps are tight and untwisted is essential. Thick clothing under the belt should also be avoided to ensure a snug fit.

Cleaning and maintenance require attention to detail. The seat cover is an integral safety component and must never be removed during use. Only original BRITAX RÖMER replacement covers should be used, as non-original parts may compromise safety. In the event of an accident with impact speeds over 10 km/h, the seat may sustain hidden damage and should be replaced immediately. Never attempt to lubricate or oil any mechanical parts of the product.

Important Notes

  • Always store the manual with the product for future reference.
  • If the product is transferred to a third party, include all documentation.
  • Ensure all heavy or sharp objects in the vehicle are secured to prevent them becoming projectiles.
  • Do not place objects in the footwell where they could interfere with the seat or pedals.
M: QW-35-FL

© Copyright 2026 Manual.ly