Entfernen Sie die Batterieabdeckung und setzen Sie
eine neue Batterie (9V DC Alkaline Block Batterie)
ein. Achten Sie auf die korrekte Polarität.
Batterieanzeige:
Die Batterieanzeige wird beim Betrieb des Gerätes
angezeigt. Das Batteriesymbol mit zwei ausgefüllten
Balken () bedeutet, die Batterie ist voll. Das
Batteriesymbol mit einem ausgefüllten und einem
unausgefüllten Balken () bedeutet, die Batterie
ist halb voll. Ist die Batterie leer erscheint das Batte-
riesymbol mit zwei unausgefüllten Balken ()
und blinkt. Das Gerät schaltet dann aus, die Batterie
muss ausgetauscht werden.
Durchführung von Messungen:
1. Entfernen Sie die Schutzkappe
und setzen Sie diese auf die
Unterseite des Gerätes auf.
2.
Halten Sie den Ein-/Ausschalter
»« so lange gedrückt, bis eine
Anzeige im Anzeigefenster erscheint.
Wählen Sie Holz »« oder
Baustoffe »« aus, indem Sie die
Auswahltaste »« drücken.
Stecken Sie die Messspitzen in das
zu überprüfende Material (z.B.
Holz), und lesen Sie den Wert im
Anzeigefenster ab. Zusätzlich er-
tönt ein akustisches Signal. Umso
höher der Ton, desto höher der Feuchtigkeitsgehalt.
Drücken Sie einmal die »Hold«-
Taste »«, um die Anzeige im
Anzeigefenster »einzufrieren«.
Dies kann z.B. nützlich sein, wenn
Sie an dunklen oder schlecht ein-
sehbaren Stellen eine Messung vornehmen wollen.
DasSymbol »« erscheint im Anzeigefenster und
das Messergebnis wird so lange angezeigt, bis die
»Hold«-Taste »« nochmals gedrückt wird.
Halten Sie die »Hold«-Taste »«
länger als 3 Sekunden gedrückt,
um den akustischen Ton ein oder
aus zu schalten.
ANWENDUNGSBEISPIELE
Auffinden eines
Lecks in der Wand
Platzieren Sie die
Messspitzen auf der
zu überprüfenden
Oberfläche. Nehmen
Sie eine Messung
vor und lesen Sie den Wert im Anzeigefenster ab.
Wiederholen Sie diesen Vorgang an unterschied -
lichen Stellen. Werden die Messwerte höher, so
nähern Sie sich dem Leck. Wenn sich die Werte nicht
mehr weiter erhöhen, haben Sie die Stelle mit dem
Leck gefunden.
Überprüfen des Feuchtigkeits -
gehalts von Baustoffen
z.B. von Beton, Ziegel, Estrich,
Gipskarton, Tapeten vor der
Weiterbearbeitung.
Überprüfen des Feuchtigkeits -
gehalts von Holz
z.B. von Brennholz oder von Holz
als Baumaterial
Bestimmung des Feuchtigkeits-
gehalts von Erde
Verwenden Sie hierzu die
Einstellung »Baustoffe«
WICHTIGE HINWEISE
Platzieren Sie die
Messspitzen be-
hutsam auf der
Oberfläche,
wenden Sie keine
Gewalt an.
Gehen Sie vorsichtig mit dem Gerät
um, wenn die Schutzkappe abge-
nommen ist. Die Messspitzen kön-
nen bei unsachgemäßer Ver wen -
dung Verletzungen verursachen.
Beim Messen von
Erde erhalten Sie
niedrigere Werte,
wenn die Messung
nur an der Ober-
fläche vorgenommen wird und höhere Werte, umso
tiefer Sie die Messspitzen in die Erde stecken. Der
Messwert unterscheidet sich erheblich, wenn Sie in
lockerer bzw. in verdichteter Blumenerde messen.
Wenn die Messspitzen auf eine me-
tallische oder leitfähige Oberfläche
aufgesetzt werden, erscheint der
Maximalwert »50« oder »33« in
der Anzeige.
Halten Sie die Messspitzen immer
mit einem feuchten Reinigungstuch
sauber und setzen Sie die Schutz-
kappe auf, wenn Sie das Gerät
nicht verwenden.
TECHNISCHE DATEN:
- Betriebsspannung: 9V DC Alkaline Block Batterie
(nicht im Lieferumfang enthalten)
- Automatische Abschaltung: nach 3 Minuten
- Messbereich: 5% - 50% (Holz);
1.5% - 33% (Baustoffe)
- Auflösung: 0.1%
- Genauigkeit: +/– 3%
- Richtwerte für den Feuchtigkeitsgehalt:
Feuchtigkeits-
Holz (%)Baustoffe (%)
gehalt
5 – 50 % 1,5 – 33 %
Niedrig 5 – 11,9 % 1,5 – 16,9 %
Mittel 12 – 15,9 % 17 – 19,9 %
Hoch 16 – 50 % 20 – 33 %
ENTSORGUNG
Elektrogeräte umweltgerecht entsorgen!
Elektrogeräte gehören nicht in den Hausmüll.
Gemäß Europäischer Richtlinie 2012/19/EG
über Elektro- und Elektronikaltgeräte müssen
verbrauchte Elektrogeräte getrennt gesammelt und
einer umweltgerechten Wiederverwertung zugeführt
werden. Möglichkeiten zur Entsorgung des
ausgedienten Geräts erfahren Sie bei Ihrer
Gemeinde- oder Stadtverwaltung
Umweltschäd
en durch falsche
Entsorgung der Batterien!
Batterien gehören nicht in den Hausmüll.
Siekönnen giftige Schwermetalle enthalten und
unterliegen der Sondermüll behandlung. Geben Sie
deshalb verbrauchte Batterien bei einer
kommunalen Sammelstelle ab.
Operating Instructions
INTRODUCTION
This moisture meter is a useful instrument, for de-
termining the moisture content of wood or construc-
tion materials such as concrete, tile, screed, plaster,
carpets, etc. Prior to operational start of the device,
read the following instructions carefully and keep
them for future reference.
Protective cap
Measuring probe
Moisture level indicator:
Low, Middle, Hight
Wood display
Construction materials display
»Acoustic signal on/off« display
On-/off switch: Hold longer than three seconds to
turn on or off.
Low battery indicator
»Hold«-function display to »freeze« measured
values
Selector button: For switching from »wood« to
»construction materials« and back
»Hold«-button: To »freeze« the measured values,
press and hold for ca. 1 second, the next push
turns the function off again. To turn the acoustic
signal on and off, press and hold for longer than
three seconds.
Battery cover (back)
OPERATION
Note: Be aware that the probe tip can cause
injuries if used incorrectly. Put the protective cover
back on when the device is not in use. Keep the
moisture meter away from children!
Inserting the Battery:
Remove the battery cover and insert a new battery
(9V DC alkaline block battery). Make sure you con-
nect the poles correctly.
Battery indicator:
The battery indicator is displayed when the device is
in use. The battery symbol with two full bars ()
means the battery is full. The battery symbol with
one full bars and one empty bar () means the
battery is half full. If the battery is empty, the bat-
tery symbol appears with two empty bars ()
and blinks. The device will then turn off and the
battery must be replaced.
Performing measurements:
1. Remove the protective cover
and place it on the underside of
the device.
2.
Press and hold the on/off switch
»« until the displayappears in
the display window.
Select wood »« or construction
materials »« by pressing the
selector button »«.
Insert the probe tip into the
material to be tested (e.g. wood)
and read the value in the display
window. At the same time, an
acoustic signal should sound.
Thehigher the tone, the higher the moisture content.
Press the »Hold«-button once »«
to »freeze« the display in the
display window. This can be useful
if you wish to perform a reading in
conditions of darkness or poor
visibility. The symbol »« will appear in the
display window and the reading will be displayed
until the »Hold«-button »« is pressed again.
Press down the »Hold«-button
»« for longer than
3 seconds to turn the acoustic tone
on or off.
SAMPLE USES
Locating a leak in
the wall
Place the probe on
the surface to be
tested. Take a rea-
ding and read the
value from the dis-
play window. Repeat this procedure in various pla-
ces. If the readings get higher, then you are getting
closer to the leak. If the values stop increasing,
you’ve found the leak.
Check the moisture content of
construction materials
e.g. concrete, tile, screed, plaster,
carpets prior to finishing.
Check the moisture content of
wood
e.g. of firewood or wood as a
building material
Determining the moisture
content of soil
Use the setting for “construction
materials”
IMPORTANT NOTICES
Place the probe
tips on the sur-
face carefully, do
not apply force.
Handle the device carefully when
the protective cap has been remo-
ved. The probes can cause injuries
if used improperly.
When measuring
soil, you will get
low readings if the
readings are only
taken at the sur-
face and higher readings the deeper you press the
probes into the soil. The measured value will differ
significantly if you take readings in loose or tightly
packed flower garden soil.
If the probes are set on a metal or
a conductive surface, the maximum
value of >>50<< or >>33<< will appear
in the display.
Keep the probes clean using a
damp cloth and put them back in
the protective cap.
TECHNICAL DATA:
- Power source: 9V DC alkaline block battery
(not included in this package)
- Automatic shut-down: after 3 minutes
- Measurement range: 5% - 50% (wood);
1.5% - 33% (construction materials)
- Resolution: 0.1%
- Precision: +/– 3%
- Reference values for moisture content:
Moisture
wood (%) construction
Content
materials (%)
5 – 50 % 1,5 – 33 %
Low 5 – 11,9 % 1,5 – 16,9 %
Middle 12 – 15,9 % 17 – 19,9 %
High 16 – 50 % 20 – 33 %
DISPOSAL
Please dispose of your used electronic
devices in an environmentally friendly
manner!
Electronic devices do not belong in your
household waste. compliant with European Guideline
2012/19/EG concerning Electrical and Electronic
Devices, used electronic devices must be collected
separately and taken to a facility for environmentally
sound recycling. You can find out about your options
for disposing of your used electronic devices from
your community or city government.
Improper disposal of batteries can
harm the environment!
Batteries do not belong in your household
waste. They can contain poisonous heavy metals and
are subject to treatment as hazardous waste.
Forthis reason, please take your used batteries to
your local collection site.
Feuchtigkeits-Detector
Damp Detector
MD
Weitere Sprachen finden Sie in der Bedienungs -
anleitung von Art.-Nr. 1 29868 0 auf:
Θα βρείτε κι άλλες γλώσσες στο εγχειρίδιο
χειρισμού τουαριθ. προϊόντος 1 29868 0 στο:
Ulteriori lingue sono disponibili nelle istruzioni
perl'uso dell'art. n. 1 29868 0 su:
Inne języki znajdą Państwo w instrukcji obsługi
artykułu onumerze 1 29868 0 na stronie:
Outros idiomas estão disponíveis no manual de
instruções do
artigo número 1 29868 0 em:
Другие языки – см. руководство по
эксплуатацииизделия, арт.-№ 1 29868 0, на сайте:
Ytterligare språk hittar du i bruksanvisningen
för artikelnr. 1 29868 0 hos:
Encontrará más idiomas en el manual de
instrucciones del artículo con número 1 29868 0 en:
Diğer dilleri Ürün no. 1 29868 0 kullanım
kılavuzunda adresinde bulabilirsiniz:
www.brennenstuhl.com
007709 Feuchtigkeitsdetector MD_007709 BA_Feuchtigkeits-Detector MD Faltblatt 19.05.16 11:55 Seite 1
/2
%
Quick check
I'm not a robot
Incorrect answer, please try again.
Chat with your Brennenstuhl MD manual using AI
Get instant AI answers from your Brennenstuhl MD manual
Ask anything about the Brennenstuhl MD. Answers come from this manual, with the pages they are based on.
Ask a Question
0/1000
Do you recommend MD?
YesNo
0
maria_k
9 months ago
Does the moisture meter show accurate moisture percentages, and are there recommended target ranges for walls vs. wood? The specs/instructions seem unclear in the listing.
0
Manual.ly
9 months ago
The device displays moisture readings as a percentage (and an additional indicator), but the exact interpretation depends on the material type and the measuring method. For wood, the percent value can be used to assess drying and suitability. For building materials like walls, you typically need to rely on guideline ranges from the relevant building standards and follow the instructions in the manual for the correct material category (probe placement, surface conditions, and whether you compare to external references). If your copy of the instructions is missing the material/spec table, please check the product page for the full manual or contact support with your model number so we can provide the correct specification and recommended interpretation. Also note that some kits may require buying a battery separately, so verify what is included in your package.
M: OA-GPT-5-NAN
M: OA-GPT-5-NAN
Video
Manual
Brennenstuhl Moisture Detector Review + User Guide
Frequently Asked
Questions
A
It measures moisture in wood (5–50%) and a range of construction materials—concrete, brick, screed, plasterboard, wallpaper, carpets—using a dedicated mode for construction materials (1.5–33%).
Is this answer helpful?
A
Turn the meter on (hold the power button ~3 seconds) and press the selector button to toggle between the wood and construction materials displays. The display will indicate which mode is active.
Is this answer helpful?
A
Press the Hold button briefly to freeze the displayed reading; press again to release. Use it when measuring in dark, awkward, or hard-to-see positions so you can remove the probe and read the value comfortably.
Is this answer helpful?
A
The audible tone rises in pitch as moisture increases, helping you scan surfaces quickly to locate wetter areas such as leaks. Press-and-hold the Hold button for ~3 seconds to toggle the acoustic signal on or off.
Is this answer helpful?
A
It uses a 9V DC alkaline block battery (not included). The display shows battery icon bars: two full bars = full, one full one empty = half, two empty blinking bars = battery empty and the device will switch off.
Is this answer helpful?
A
Handle probe tips carefully and keep the protective cap on when not in use. Do not force probes into materials. Clean probes with a damp cloth. Expect lower surface soil readings and higher values when probes penetrate deeper; avoid measuring on metal or conductive surfaces.
Is this answer helpful?
A
Resolution is 0.1% with an approximate accuracy of ±3%, and automatic shutdown occurs after about three minutes to conserve battery.
Is this answer helpful?
M: OA-GPT-5-NAN
Advantagesand
Disadvantages
Advantages
Simple probe-based design with audible tone for quick scans and locating leaks
Selectable modes for wood and construction materials with tailored measurement ranges
Hold function to freeze readings for use in dark or awkward places
Compact, battery-powered and auto-shutoff for portable use and extended battery life
Clear battery indicator and straightforward operation suitable for DIY and pros
VS
Disadvantages
Contact probe design requires direct insertion and can cause injury if mishandled
Limited to surface or shallow measurements; deeper moisture needs more invasive probing
Metal or conductive surfaces produce maximum readings, reducing usefulness on such materials
Accuracy ±3% may be insufficient for highly precise laboratory measurements
Requires a 9V battery (not included) and periodic replacement
M: OA-GPT-5-NAN
Product
Description
Brennenstuhl Moisture Detector MD Moisture Meter Manual
The Brennenstuhl Moisture Detector MD is a compact, user-friendly moisture meter designed to measure moisture levels in wood and various construction materials such as concrete, brick, screed, plasterboard and wallpapers. Intended for both DIY enthusiasts and professionals, it provides quick spot checks with a simple probe-based measurement system, an audible tone that rises with moisture level, and clear visual indicators for Low, Medium and High moisture ranges.
This meter is powered by a 9V alkaline battery and features a protective cap for the probe tips to prevent damage and accidental injury. A selector button lets you switch between wood and construction material modes, adapting the measurement range and reference values accordingly. The device also includes a Hold function to freeze readings for easier recording in hard-to-see locations, an acoustic on/off control, and an automatic shut-off after three minutes to conserve battery life.
Practical for locating wall leaks, checking building materials before finishing, assessing firewood readiness, or testing soil moisture, the detector reports moisture in percent with 0.1% resolution and about ±3% accuracy. For wood the measurement range is 5–50% and for construction materials 1.5–33%. The display includes battery level icons so you know when replacement is required.
Operation is straightforward: remove the protective cap, power on (hold three seconds), choose the material setting, insert the probes, and read the displayed value. The audio tone helps rapidly identify wetter spots when scanning surfaces. Use the Hold button to lock a reading, and press-and-hold it to toggle the acoustic signal.
Handle probe tips carefully—improper use can cause injury—and keep them clean with a damp cloth. When testing soil expect lower surface readings and higher values as probes penetrate deeper; readings also vary between loose and compacted soils. Avoid placing probes on metal or conductive surfaces, which will display the device's maximum reading. Dispose of electronic waste and batteries responsibly following local regulations.
Notes
Uses one 9V alkaline block battery (not included).
maria_k
9 months ago
Does the moisture meter show accurate moisture percentages, and are there recommended target ranges for walls vs. wood? The specs/instructions seem unclear in the listing.
Manual.ly
9 months ago
The device displays moisture readings as a percentage (and an additional indicator), but the exact interpretation depends on the material type and the measuring method. For wood, the percent value can be used to assess drying and suitability. For building materials like walls, you typically need to rely on guideline ranges from the relevant building standards and follow the instructions in the manual for the correct material category (probe placement, surface conditions, and whether you compare to external references). If your copy of the instructions is missing the material/spec table, please check the product page for the full manual or contact support with your model number so we can provide the correct specification and recommended interpretation. Also note that some kits may require buying a battery separately, so verify what is included in your package.