Manual.ly Logo

Bosch Professional GSH 5 CE Manual

4.9 · 15 Ratings

PDF manual · 143 Pages

English

M: QW-35-FL
page

/ 143

Loading...
68b0294e25c6d18e8ba1ff2456133452f6ac page d
English | 13
Bosch Power Tools 1 609 92A 0FE | (9.12.13)
Changing the Tool
With the SDS-max tool holder, simpler and easier tool chang-
ing is possible without additional aids.
The dust protection cap 1 largely prevents the penetration of
dust into the tool holder during operation. When inserting the
tool, pay attention that the dust protection cap 1 is not dam-
aged.
A damaged dust protection cap should be changed im-
mediately. We recommend having this carried out by
an after-sales service.
Inserting (see figure B)
– Clean and lightly grease the shank end of the tool.
– Insert the tool in a twisting manner into the tool holder until
it latches itself.
– Check the latching by pulling the tool.
Removing (see figure C)
– Push back the locking sleeve 2 and remove the tool.
Dust/Chip Extraction
Dusts from materials such as lead-containing coatings, some
wood types, minerals and metal can be harmful to one’s
health. Touching or breathing-in the dusts can cause allergic
reactions and/or lead to respiratory infections of the user or
bystanders.
Certain dusts, such as oak or beech dust, are considered as
carcinogenic, especially in connection with wood-treatment
additives (chromate, wood preservative). Materials contain-
ing asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the mate-
rials to be worked.
Operation
Starting Operation
Observe correct mains voltage! The voltage of the pow-
er source must agree with the voltage specified on the
nameplate of the machine. Power tools marked with
230 V can also be operated with 220 V.
Switching On and Off
–To start the machine, press the On/Off switch 6 at the top
(I) until it locks.
–To switch off the machine, press the On/Off switch 6 at
the bottom (0) and release it.
For low temperatures, the power tool reaches the full ham-
mer/impact capacity only after a certain time.
To save energy, only switch the power tool on when using it.
Setting the Speed/Impact Rate
The electronic control enables stepless speed and impact
preselection in accordance with the material to be worked.
The constant electronic control keeps the preselected speed
and impact rate nearly constant between no-load and load
conditions.
Select the speed with the thumbwheel 7 according to the ma-
terial.
When plugging the plug into the socket outlet or after a power
failure, the constant electronic control automatically sets the
highest speed and impact rate. This ensures working at opti-
mum performance despite too low preadjustment of the
thumbwheel 7.
The data in the following table are recommended values.
Changing the Chiselling Position (Vario-Lock)
The chisel can be locked in 12 positions. In this manner, the
optimum working position can be set for each application.
– Insert the chisel into the tool holder.
– Push the chisel adjustment ring 3 forward and turn the
chisel to the required position with the chisel adjustment
ring 3.
– Release the chisel adjustment ring 3 and turn the chisel un-
til it latches.
Working Advice
Before any work on the machine itself, pull the mains
plug.
Vibration Damper
The integrated vibration damper in the main handle and at the
hammer mechanism reduces occurring vibrations.
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself, pull the mains
plug.
For safe and proper working, always keep the machine
and ventilation slots clean.
A damaged dust protection cap should be changed im-
mediately. We recommend having this carried out by
an after-sales service.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Application Thumb-
wheel 7
Working roughcast/light building materials
Removing tiles
Working brick
Working concrete
OBJ_BUCH-419-009.book Page 13 Monday, December 9, 2013 2:43 PM

Chat with your Bosch Professional GSH 5 CE manual using AI

Get instant AI answers from your Bosch Professional GSH 5 CE manual

Ask anything about the Bosch Professional GSH 5 CE. Answers come from this manual, with the pages they are based on.

GSH 5 CE Maintenance Schedule

Before use
Clean and lightly grease the shank end of the tool

Clean the insertion end of the accessory tool and apply a thin layer of grease before inserting it into the SDS-max holder.

Show in the manual (page 13)
Regularly
Keep machine and ventilation slots clean

Maintain cleanliness of the power tool and its ventilation openings to ensure safe and proper operation.

Show in the manual (page 13)
As needed
Replace damaged dust protection cap

If the dust protection cap is damaged, replace it immediately. It is recommended to have this done by an after-sales service.

Show in the manual (page 13)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend GSH 5 CE?

Yes No
0
User Pic

Markus Weber

6 months ago

Is this hammer powerful enough for removing thick concrete or cement flooring, and does it come with the right chisels?

0
User Pic

Manual.ly

6 months ago

Yes, this hammer is highly effective for heavy-duty tasks like removing thick concrete, cement floors, and plaster. Users report excellent performance in stripping large areas quickly. The unit includes a wide chisel ideal for flat surfaces and a pointed chisel for breaking up material. While some users note it feels slightly heavy during fine putty work, that weight provides the necessary force for floor demolition. It serves as a strong all-rounder for small to medium jobs, though very large projects might require a more industrial model.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Mark Stewart

4 months ago

How durable is this tool? Will it last long if used daily for renovation work?

M: QW-35-FL

Frequently Asked Questions

A

This hammer is designed for chiseling in concrete, brick, stone, and asphalt. It can also drive and compact materials when used with appropriate accessories.

Is this answer helpful?

A

Use the Vario-Lock ring to rotate the chisel into one of 12 locked positions. Push the ring forward, turn the chisel to your desired angle, then release to lock it securely.

Is this answer helpful?

A

Yes, a service indicator light will illuminate or blink about eight hours before the carbon brushes wear out, signaling that maintenance is needed soon.

Is this answer helpful?

A

Yes, the auxiliary handle can be swiveled to any position around the tool axis for a comfortable grip. It can also be completely removed and reinstalled if needed.

Is this answer helpful?

A

You must wear hearing protection due to high noise levels. Eye protection is mandatory, and dust masks are recommended when working with hazardous materials like lead paint or asbestos.

Is this answer helpful?

A

Yes, but you must use an extension cord rated for outdoor use to prevent electric shock. Always ensure the tool is plugged into a ground fault circuit interrupter outlet.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Integrated vibration damping reduces operator fatigue significantly
  • SDS-max chuck system enables fast and tool-free bit changes
  • Vario-Lock allows selection of 12 precise chisel positions
  • Constant electronic control maintains speed under varying loads
  • Service indicator alerts users before carbon brush failure occurs
VS

Disadvantages

  • Heavy weight of 6.2 kg may cause strain during overhead work
  • High noise level of 86 dB requires mandatory hearing protection
  • No dust extraction port included in standard package
  • Requires separate purchase of specific accessories for specialized tasks
  • Cord length may be insufficient for large outdoor sites without extension
M: QW-35-FL

Product Specification

Power

1150 W

No-load stroke rate

1300-2900 rpm

Impact energy

8.3 J

Chisel positions

12

Tool attachment

SDS-max quick-change chuck

Features

Variable speed control, Softgrip, auxiliary handle, vibration damping, constant electronics

Weight

13.67 lbs

Package contents

Case, chisel

M: QW-35-FL

Product Description

The Ultimate Guide to the Bosch Professional GSH 5 CE Electric Chisel Hammer

The Bosch Professional GSH 5 CE is a powerhouse designed for demanding demolition and chiseling tasks. This electric chisel hammer excels in concrete, brick, stone, and asphalt applications. Whether you are removing tiles, breaking up thick walls, or compacting materials, this tool delivers consistent performance. It features an SDS-max chuck system that allows for quick and easy tool changes without the need for extra wrenches.

One of the standout features of the GSH 5 CE is its advanced vibration damping system. Integrated into both the main handle and the hammer mechanism, it significantly reduces vibrations transmitted to the user. This ergonomic design minimizes fatigue during long work sessions, making it ideal for professional contractors who rely on comfort and efficiency. The tool also includes a Vario-Lock function, allowing users to select from 12 different chisel positions to find the perfect angle for any job.

Powering this machine is a robust 1150-watt motor that provides a high impact rate ranging from 1300 to 2900 blows per minute. The electronic control system ensures constant speed under load, maintaining optimal performance regardless of the material density. Safety is paramount with insulated gripping surfaces on both the main and auxiliary handles. These features protect the operator from accidental contact with hidden wiring while working near electrical sources.

Maintenance is straightforward thanks to clear indicators on the device. A service indicator lights up approximately eight hours before the carbon brushes need replacement, giving ample time to schedule maintenance. The stand-by indicator confirms power availability instantly. The unit comes with a dedicated case for safe storage and transport, ensuring your investment remains protected when not in use. With its durable build and professional-grade capabilities, the Bosch Professional GSH 5 CE stands as a reliable companion for heavy-duty construction projects.

M: QW-35-FL

© Copyright 2026 Manual.ly