Manual.ly Logo

Bosch Professional GDE 18V-16 Manual

0.0 · 0 Ratings

PDF manual · 76 Pages

English

M: OA-GPT-54-NAN
page

/ 76

Loading...
4ac751d3aa92ad067f71dc7eb00747285c60 page 6
6 | Deutsch
1 609 92A 19U | (30.9.16) Bosch Power Tools
– Schieben Sie die Bohrerspitze von hinten durch das Staub-
auge 1/2 und setzen Sie ihn danach in das Bohrfutter ent-
sprechend den Anweisungen Ihres Elektrowerkzeugs ein.
– Vor dem Entnehmen des Bohrers drücken Sie wieder die
Taste 5 und ziehen die Führung 4 bis zum Anschlag nach
außen.
Führungslänge einstellen (siehe Bild C)
Für eine saubere Absaugung und eine korrekte Einstellung
des Tiefenanschlags muss die Führung 4 so eingestellt
werden, dass die Bohrerspitze vorn mit dem Staubauge 1/2
bündig ist.
Hinweis: Zum Aufbewahren der Absaugvorrichtung drücken
Sie die Taste 5 und ziehen die Führung 4 bis zum Anschlag
nach außen. Dadurch wird die Feder der Führung entlastet
und die Lebensdauer der Feder erhöht.
Bohrtiefe einstellen (siehe Bild D)
Mit der Taste 3 für die Tiefenanschlageinstellung kann die
gewünschte Bohrtiefe X festgelegt werden.
– Drücken Sie die Taste 3 und verschieben Sie die Taste so
auf der Führung 4, dass der im Bild gezeigte Abstand X Ihr-
er gewünschten Bohrtiefe entspricht.
– Lassen Sie die Taste 3 wieder los.
Staubauge wechseln (siehe Bild E)
Je nach Bohrfutter müssen Sie das Staubauge 1/2 wechseln:
–Staubauge 1 für ein SDS-plus-Wechselbohrfutter
–Staubauge 2 für ein SDS-plus-Festbohrfutter
Darüberhinaus müssen Sie das Staubauge wechseln, wenn
die Wandauflagefläche deutliche Verschleißspuren aufweist
und dadurch beim Absaugen Staub durch die Absaugbürste
entweicht.
Staubauge 1/2 entnehmen:
– Drücken Sie auf den Arretierknopf 12 und ziehen Sie das
Staubauge nach oben aus der Halterung.
Staubauge 1/2 montieren:
– Stecken Sie das neue Staubauge von oben in die Halter-
ung, bis der Arretierknopf 12 hörbar einrastet.
Staubbox entleeren (siehe Bilder F1–F4)
Hinweis: Tragen Sie bei der Wartung und Reinigung der
Staubbox eine Staubschutzmaske.
Leeren Sie die Staubbox 13 nach Abschluss der Arbeiten
sowie bei Bedarf, um die optimale Leistungsfähigkeit der Ab-
saugung zu erhalten. Mit Hilfe des Sichtfensters 7 können Sie
den Füllstand der Staubbox kontrollieren.
– Halten Sie das Elektrowerkzeug mit der Absaugvorrich-
tung waagerecht und schalten Sie das Elektrowerkzeug für
einige Sekunden ein.
Dadurch werden Staubreste aus dem Absaugkanal in die
Staubbox 13 gesaugt.
– Drücken Sie sowohl die linke als auch die rechte Entriege-
lungstaste 6 und ziehen Sie die Staubbox 13 aus der Ab-
saugvorrichtung.
– Schütteln Sie die Staubbox 13 über einem geeigneten Ab-
fallbehälter aus.
– Drücken Sie sowohl die linke als auch die rechte Verriege-
lungslasche 15 nach innen und ziehen Sie den HEPA-Filter
14 aus der Staubbox.
– Klopfen Sie den HEPA-Filter vorsichtig aus oder bürsten
Sie die Lamellen des HEPA-Filters mit einem weichen Bes-
en ab.
Hinweis: Reinigen Sie den HEPA-Filter nicht mit Wasser
oder durch Ausblasen mit Druckluft.
– Stecken Sie den HEPA-Filter 14 nach der Reinigung wieder
in die Staubbox 13. Schieben Sie anschließend die Staub-
box in die Absaugvorrichtung, bis die Entriegelungstasten
6 hörbar einrasten.
Wartung und Service
Wartung und Reinigung
Reinigen Sie die Absaugvorrichtung mit einem trockenen,
weichen Tuch.
Kundendienst und Anwendungsberatung
Der Kundendienst beantwortet Ihre Fragen zu Reparatur und
Wartung Ihres Produkts sowie zu Ersatzteilen. Explosionsze-
ichnungen und Informationen zu Ersatzteilen finden Sie auch
unter:
www.bosch-pt.com
Das Bosch-Anwendungsberatungs-Team hilft Ihnen gerne bei
Fragen zu unseren Produkten und deren Zubehör.
www.powertool-portal.de, das Internetportal für
Handwerker und Heimwerker.
Geben Sie bei allen Rückfragen und Ersatzteilbestellungen
bitte unbedingt die 10-stellige Sachnummer laut Typenschild
des Produkts an.
– Setzen Sie den gewünschten
Bohrer in die Werkzeugaufnah-
me des Bohrfutters ein.
– Drücken Sie die Taste 5 wäh-
rend Sie die Führung 4 entspre-
chend der Bohrerlänge einstel-
len.
– Lassen Sie die Taste 5 wieder
los.
OBJ_BUCH-2783-001.book Page 6 Friday, September 30, 2016 2:30 PM

Chat with your Bosch Professional GDE 18V-16 manual using AI

Get instant AI answers from your Bosch Professional GDE 18V-16 manual

Ask anything about the Bosch Professional GDE 18V-16. Answers come from this manual, with the pages they are based on.

GDE 18V-16 Maintenance Schedule

After each use
Empty dust box

Empty the dust box after completing work and as needed to maintain optimal suction performance.

As needed
Clean HEPA filter

Tap or brush the HEPA filter clean. Do not wash with water or use compressed air.

When worn
Replace dust cap

Change the dust cap if the wall contact surface shows clear signs of wear causing dust escape.

Immediately
Replace damaged filter

Replace a damaged filter immediately; do not use without a filter or with cracks/holes.

Occasional
Wipe device clean

Clean the dust extraction attachment using a dry, soft cloth.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend GDE 18V-16?

Yes No

Frequently Asked Questions

A

It is designed for drilling in concrete, brick, stone, ceramic, and tiles. It is not meant for wood, metal, or plastic.

Is this answer helpful?

A

The extractor is intended for use with Bosch GBH 18V-26 and GBH 18V-26 F rotary hammers.

Is this answer helpful?

A

No. It should never be used without a filter, because larger dust particles may escape and the tool could be damaged.

Is this answer helpful?

A

Remove it carefully, tap it gently or brush the pleats with a soft brush. Do not wash it with water or blow it with compressed air.

Is this answer helpful?

A

Yes. A viewing window lets you see the dust level so you know when emptying is needed.

Is this answer helpful?

A

The guide adjusts to match drill bit length and align the dust cap correctly, which helps improve dust extraction and drilling precision.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Captures drilling dust at the source for a cleaner work area.
  • Adjustable guide and depth stop support accurate drilling.
  • HEPA filtration helps trap very fine dust particles.
  • Quick mounting and removal make setup fast on compatible tools.
VS

Disadvantages

  • Not suitable for drilling in wood, metal, or plastic.
  • Works only with specific Bosch rotary hammer models.
  • Requires regular dust box emptying and filter care.
  • Dust cap may need replacement after visible wear.
M: OA-GPT-54-NAN

Product Specification

Suitable for

Bosch Cordless Rotary Hammer GBH 18V-26, GBH 18V-26F

M: OA-GPT-54-NAN

Product Description

Bosch Professional GDE 18V-16 Dust Extractor

The Bosch Professional GDE 18V-16 Dust Extractor is a smart companion for drilling tasks where cleanliness and control matter. Designed for use with Bosch rotary hammers, it helps capture drilling dust directly at the source, making work in concrete, brick, stone, ceramic, and tiles noticeably tidier. For users who care about efficiency and a cleaner workspace, this compact attachment can make a real difference.

Cleaner drilling with better control

One of the standout benefits of the Bosch Professional GDE 18V-16 Dust Extractor Manual is how straightforward the system is to use. The attachment locks onto compatible tools, and its guide can be adjusted to match drill bit length and drilling depth. That means the dust extraction stays aligned with the bit, helping maintain accuracy while reducing mess around the hole.

The unit also includes a dust box with a viewing window, so you can monitor fill level at a glance. For fine dust management, the HEPA filter is especially useful, capturing 99.97% of particles larger than 0.3 micrometers. This makes it a practical choice for tradespeople who want better dust control without adding unnecessary complexity to the job.

Built for practical jobsite use

The design focuses on usability. It mounts and removes quickly, and the adjustable dust caps are made for different chuck types. If the wall contact surface wears down over time, the dust cap can be replaced to maintain performance. That kind of detail shows this extractor is built for repeated professional use, not just occasional jobs.

Maintenance is simple, but important. The dust box should be emptied regularly, and the filter should be cleaned carefully by tapping or brushing it—never with water or compressed air. These small habits help preserve suction performance and extend the life of the attachment.

Best fit for the right applications

This extractor is ideal for drilling into mineral-based materials where dust control is critical. It is not intended for wood, metal, or plastic, and it is only compatible with specific Bosch hammer models. That said, within its intended use, it offers a strong balance of convenience, precision, and cleaner operation.

Notes

  • Use only with compatible Bosch hammer drills.
  • Always work with an undamaged filter installed.
  • Empty the dust box regularly for best performance.
  • Do not clean the HEPA filter with water or compressed air.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly