Manual.ly Logo

Bosch Professional GAL 1830 W-DC Manual

0.0 · 0 Ratings

PDF manual · 89 Pages

English

M: OA-GPT-54-NAN
page

/ 89

Loading...
bc2f7c3498a77d759ae3825a071039d95a8f page 7
English | 7
Bosch Power Tools 1 609 92A 34U | (26.7.16)
Only charge Bosch lithium-ion
batteries with a capacity of 2.0 Ah
or more (3 battery cells or more).
The battery voltage must match
the battery charging voltage of the
charger. Do not charge non-re-
chargeable batteries. Otherwise
there is danger of fire and explosion.
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
Do not operate the battery charger on easily inflamma-
ble surfaces (e. g., paper, textiles, etc.) or surround-
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Do not place metal objects on the charger or between
battery and charger. Metal objects can heat up and lead
to injuries.
Do not place credit cards or other magnetic data carri-
ers near the charger. Stored data on these data carriers
can be deleted.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Intended Use
The charger is intended to recharge inductive Bosch 10.8 V,
12 V or 18 V Li-Ion batteries.The inductive charging is per-
formed by means of a contactless charging process using
magnetic induction.
Product Features
The numbering of the product features refers to the illustra-
tion of the battery charger on the graphics page.
1 Inductive battery*
2 Standby indicator (green)
3 Charge status indicator
4 Error indicator (red)
5 Charging platform
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Operation
Starting Operation
Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
Charging Procedure
The charging process begins as soon as the mains plug of the
charger is plugged into the socket outlet and the inductive
battery 1 or the power tool with battery 1 (with base of the
battery) is placed onto the charging platform 5.
The charging process only begins when the battery capacity is
less than 85 – 90 %. This prolongs the life of the battery.
Due to the intelligent charging method, the charging condi-
tion of the battery is automatically detected and the battery is
charged with the optimum charging current, depending on
battery temperature and voltage.
This gives longer life to the battery and always leaves it fully
charged when kept in the charger for storage.
Battery Charger GAL 1830 W
Article number
2 607 225 8..
Battery charging voltage (auto-
matic voltage detection)
V 10.8–18
Charging current
A3.0
Allowable charging temperature
range
°C 0–45
Charging time for battery
capacity, approx.
(80%) 100%
–2.0 Ah
min (35) 45
–2.5 Ah
min (45) 65
–4.0 Ah
min (65) 85
Number of battery cells
3–10
Weight according to EPTA-
Procedure 01:2014
kg 0.58
Protection class
/ II
Battery pack Article number
GBA 10,8 V ...Ah OW-B
1 607 A35 ...
GBA 12 V ...Ah W
1 607 A35 ...
GBA 18 V ...Ah MW-...
2 607 336 ...
OBJ_BUCH-2159-006.book Page 7 Tuesday, July 26, 2016 2:24 PM

Chat with your Bosch Professional GAL 1830 W-DC manual using AI

Get instant AI answers from your Bosch Professional GAL 1830 W-DC manual

Ask anything about the Bosch Professional GAL 1830 W-DC. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend GAL 1830 W-DC?

Yes No

Frequently Asked Questions

A

It is designed for Bosch inductive Li-ion batteries in 10.8 V, 12 V, and 18 V formats, typically from 2.0 Ah and above with at least 3 cells.

Is this answer helpful?

A

The charger uses magnetic induction. You place the battery, or a compatible tool with the battery installed, onto the charging platform and power transfer starts without direct metal contact.

Is this answer helpful?

A

Green standby means the charger is powered and ready. Flashing green shows active charging. Solid green LEDs indicate a full battery. Red light signals a temperature issue or another charging fault.

Is this answer helpful?

A

Yes. The charger uses smart charging and helps keep the battery fully charged in storage. It also avoids unnecessary charging when the battery is already close to full.

Is this answer helpful?

A

Common causes are wrong placement, a foreign object on the platform, an incompatible battery, or a defective battery. The charger may also stop if the battery temperature is outside the allowed range.

Is this answer helpful?

A

Charging is allowed roughly between 0°C and 45°C. If the battery is too hot or too cold, the charger shows an error and waits until the battery returns to the safe range.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Contactless inductive charging reduces wear on connectors and makes placement easy.
  • Supports Bosch 10.8 V, 12 V, and 18 V Li-ion batteries with automatic voltage detection.
  • Smart charging adjusts current to battery temperature and voltage for better battery care.
  • LED indicators clearly show standby, charging progress, and error conditions.
VS

Disadvantages

  • Works only with compatible Bosch inductive batteries, so it is not a universal charger.
  • Charging begins only when the battery is below about 85–90%, which may surprise some users.
  • Non-rechargeable batteries are not supported and must never be used.
  • Incorrect placement or foreign objects on the platform can stop charging.
M: OA-GPT-54-NAN

Product Specification

Type

Charger

Suitable for

Bosch Wireless Charging System

Battery voltage

18V

Battery type

Li-Ion

Weight

1.28 lb

Scope of delivery

12V Car adapter, Mounting frame

M: OA-GPT-54-NAN

Product Description

Bosch Professional GAL 1830 W-DC: Practical Wireless Charging for Bosch Batteries

The Bosch Professional GAL 1830 W-DC is designed for users who want a cleaner, simpler way to keep Bosch batteries ready for work. Instead of handling worn charging contacts or aligning plugs, this charger uses inductive, contactless charging through magnetic induction. That makes it a smart fit for busy workshops, service vans, and tool benches where convenience and reliability matter.

What stands out first is the charger’s broad compatibility. It supports Bosch 10.8 V, 12 V, and 18 V Li-ion batteries, as long as they meet the required capacity and cell count. The system also uses automatic voltage detection, so the charger can recognize the battery type and adjust its behavior accordingly. This helps keep charging efficient while reducing unnecessary stress on the battery.

The charging process is intentionally intelligent. It does not rush to top up a battery that is already nearly full; instead, it begins charging when the capacity drops below roughly 85–90%. That approach helps extend battery life over time. Once charging starts, the current is adapted to the battery’s temperature and voltage, so the charger can deliver the most suitable power at the moment.

The Bosch Professional GAL 1830 W-DC Wireless Charging Charger Manual also highlights how easy the unit is to monitor. A green standby light shows that power is connected and the charger is ready. During charging, the LED indicators show progress, while a red light warns about temperature limits or other faults. That makes it easier to understand what is happening without guessing.

For everyday use, this charger feels built around practicality. It is compact, protective, and made for consistent use with matching Bosch batteries. It is not meant for universal charging, but within its ecosystem it delivers a neat, efficient, and durable solution.

Notes

  • Best suited for compatible Bosch inductive Li-ion batteries only.
  • Keep the charging surface clear to avoid detection errors.
  • A warm charger during repeated charging cycles is normal.
  • Full charge storage support helps batteries stay ready for the next job.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly