Manual.ly Logo

Bosch DIY UniversalImpact 730 Manual

0.0 · 0 Ratings

PDF manual · 89 Pages

English

M: OA-GPT-54-NAN
page

/ 89

Loading...
0f2b6181d12bc80d08db979316c02b6b6018 page a
10 | Deutsch
Drehzahl/Schlagzahl vorwählen
Mit dem Stellrad Drehzahlvorwahl (6) können Sie die benö-
tigte Drehzahl/Schlagzahl auch während des Betriebes vor-
wählen.
Die erforderliche Drehzahl/Schlagzahl ist vom Werkstoff und
den Arbeitsbedingungen abhängig und kann durch prakti-
schen Versuch ermittelt werden.
Arbeitshinweise
u Ziehen Sie vor allen Arbeiten am Elektrowerkzeug den
Netzstecker aus der Steckdose.
u Setzen Sie das Elektrowerkzeug nur ausgeschaltet auf
die Mutter/Schraube auf. Sich drehende Einsatzwerk-
zeuge können abrutschen.
Nach längerem Arbeiten mit kleiner Drehzahl sollten Sie das
Elektrowerkzeug zur Abkühlung ca. 3 Minuten lang bei maxi-
maler Drehzahl im Leerlauf drehen lassen.
Wartung und Service
Wartung und Reinigung
u Ziehen Sie vor allen Arbeiten am Elektrowerkzeug den
Netzstecker aus der Steckdose.
u Halten Sie das Elektrowerkzeug und die Lüftungs-
schlitze sauber, um gut und sicher zu arbeiten.
Wenn ein Ersatz der Anschlussleitung erforderlich ist, dann
ist dies von Bosch oder einer autorisierten Kundendienst-
stelle für Bosch-Elektrowerkzeuge auszuführen, um Sicher-
heitsgefährdungen zu vermeiden.
Kundendienst und Anwendungsberatung
Der Kundendienst beantwortet Ihre Fragen zu Reparatur und
Wartung Ihres Produkts sowie zu Ersatzteilen. Explosions-
zeichnungen und Informationen zu Ersatzteilen finden Sie
auch unter: www.bosch-pt.com
Das Bosch-Anwendungsberatungs-Team hilft Ihnen gerne
bei Fragen zu unseren Produkten und deren Zubehör.
Geben Sie bei allen Rückfragen und Ersatzteilbestellungen
bitte unbedingt die 10-stellige Sachnummer laut Typen-
schild des Produkts an.
Deutschland
Robert Bosch Power Tools GmbH
Servicezentrum Elektrowerkzeuge
Zur Luhne 2
37589 Kalefeld – Willershausen
Kundendienst: Tel.: (0711)40040480
Unter www.bosch-pt.de können Sie online Ersatzteile be-
stellen oder Reparaturen anmelden.
Anwendungsberatung:
Tel.: (0711)40040480
Fax: (0711)40040482
Weitere Serviceadressen finden Sie unter:
www.bosch-pt.com/serviceaddresses
Entsorgung
Elektrowerkzeuge, Zubehör und Verpackungen sollen einer
umweltgerechten Wiederverwertung zugeführt werden.
Werfen Sie Elektrowerkzeuge nicht in den
Hausmüll!
Nur für EU-Länder:
Gemäß der Europäischen Richtlinie 2012/19/EU über Elek-
tro- und Elektronik-Altgeräte und ihrer Umsetzung in natio-
nales Recht müssen nicht mehr gebrauchsfähige Elektro-
werkzeuge getrennt gesammelt und einer umweltgerechten
Wiederverwertung zugeführt werden.
Bei unsachgemäßer Entsorgung können Elektro- und Elektro-
nik-Altgeräte aufgrund des möglichen Vorhandenseins ge-
fährlicher Stoffe schädliche Auswirkungen auf die Umwelt
und die menschliche Gesundheit haben.
Nur für Deutschland:
Informationen zur Rücknahme von Elektro-Altgeräten für
private Haushalte
Wie im Folgenden näher beschrieben, sind bestimmte Ver-
treiber zur unentgeltlichen Rücknahme von Altgeräten ver-
pflichtet.
Vertreiber mit einer Verkaufsfläche für Elektro- und Elektro-
nikgeräte von mindestens 400m² sowie Vertreiber von Le-
bensmitteln mit einer Gesamtverkaufsfläche von mindestens
800m², die mehrmals im Kalenderjahr oder dauerhaft Elek-
tro- und Elektronikgeräte anbieten und auf dem Markt bereit-
stellen, sind verpflichtet,
1. bei der Abgabe eines neuen Elektro- oder Elektronikge-
räts an einen Endnutzer ein Altgerät des Endnutzers der
gleichen Geräteart, das im Wesentlichen die gleichen
Funktionen wie das neue Gerät erfüllt, am Ort der Abga-
be oder in unmittelbarer Nähe hierzu unentgeltlich zu-
rückzunehmen; Ort der Abgabe ist auch der private
Haushalt, sofern dort durch Auslieferung die Abgabe er-
folgt: In diesem Fall ist die Abholung des Altgeräts für
den Endnutzer unentgeltlich; und
2. auf Verlangen des Endnutzers Altgeräte, die in keiner
äußeren Abmessung größer als 25cm sind, im Einzel-
handelsgeschäft oder in unmittelbarer Nähe hierzu un-
entgeltlich zurückzunehmen; die Rücknahme darf nicht
an den Kauf eines Elektro- oder Elektronikgerätes ge-
knüpft werden und ist auf drei Altgeräte pro Geräteart
beschränkt.
Der Vertreiber hat beim Abschluss des Kaufvertrags für das
neue Elektro- oder Elektronikgerät den Endnutzer über die
Möglichkeit zur unentgeltlichen Rückgabe bzw. Abholung
des Altgeräts zu informieren und den Endnutzer nach seiner
Absicht zu befragen, ob bei der Auslieferung des neuen Ge-
räts ein Altgerät zurückgegeben wird.
Dies gilt auch bei Vertrieb unter Verwendung von Fernkom-
munikationsmitteln, wenn die Lager- und Versandflächen für
Elektro- und Elektronikgeräte mindestens 400m² betragen
oder die gesamten Lager- und Versandflächen mindestens
800m² betragen, wobei die unentgeltliche Abholung auf
1 609 92A 8X7 | (01.06.2023) Bosch Power Tools

Chat with your Bosch DIY UniversalImpact 730 manual using AI

Get instant AI answers from your Bosch DIY UniversalImpact 730 manual

Ask anything about the Bosch DIY UniversalImpact 730. Answers come from this manual, with the pages they are based on.

UniversalImpact 730 Maintenance Schedule

Before each use
Check moving parts and damage

Check if moving parts function properly without binding and look for broken or damaged parts that affect operation.

Before each use
Keep handles clean and dry

Keep handles and grasping surfaces dry, clean, and free from oil and grease to ensure safe control.

As needed
Keep cutting tools sharp and clean

Properly maintained cutting tools with sharp edges bind less and are easier to control.

When dirty
Clean tool and ventilation slots

Keep the power tool and ventilation slots clean to ensure safe and efficient operation.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend UniversalImpact 730?

Yes No

Frequently Asked Questions

A

It is designed for impact drilling in brick, concrete, and stone, plus regular drilling in wood, metal, ceramic, and plastic. It can also handle screwdriving when the direction and drilling mode are set correctly.

Is this answer helpful?

A

Yes. With electronic control and clockwise/anticlockwise rotation, it can be used for screwdriving tasks. The selector should be set to the drilling symbol when driving screws.

Is this answer helpful?

A

It has a 730 W rated input and up to 530 W output. The speed reaches 3,200 rpm, and the impact rate goes up to 48,000 bpm, which is enough for common DIY drilling jobs.

Is this answer helpful?

A

The drill can handle up to 14 mm in masonry and concrete, 12 mm in steel, and 30 mm in wood. Its chuck capacity is 2 to 13 mm, which suits many standard bits.

Is this answer helpful?

A

Yes. The auxiliary handle improves grip, stability, and control, especially during impact drilling. It also helps reduce fatigue and allows better depth management when used with the depth stop.

Is this answer helpful?

A

Use dust extraction if possible, keep the work area well ventilated, and wear a P2 filter mask when needed. Some dusts, like hardwood or mineral dust, can be harmful if inhaled.

Is this answer helpful?

A

It is better suited to home DIY and light-to-moderate work rather than heavy professional construction. Its compact size and drilling limits make it practical, but not a replacement for a dedicated high-end hammer drill.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Versatile for wood, metal, masonry, ceramic, and plastic tasks.
  • Keyless chuck and speed control make everyday use easy.
  • Auxiliary handle and depth stop improve stability and accuracy.
  • Light enough for home projects at 2.1 kg.
VS

Disadvantages

  • Impact drilling produces high noise, so hearing protection is needed.
  • Corded design limits mobility compared with cordless models.
  • Concrete and masonry work is limited to moderate drilling sizes.
  • Long work sessions can heat the chuck and increase fatigue.
M: OA-GPT-54-NAN

Product Specification

Type

Impact drill

No-load speed

50-3200/min

No-load impact rate

48000/min

Drilling capacity

Wood 1.18 in, Steel 0.47 in, Concrete 0.55 in

Torque

max. 150.46 in-lb

Tool holder

0.08-0.51 in keyless chuck

Special features

Right/left rotation, Speed regulation, Constant electronics, Impact stop, Soft grip, Auxiliary handle, Depth stop

Weight

4.63 lb

M: OA-GPT-54-NAN

Product Description

Bosch DIY UniversalImpact 730: A Compact Impact Drill for Everyday DIY

The Bosch DIY UniversalImpact 730 Electric impact drill brings a practical balance of power, control, and versatility to home improvement projects. Built for drilling in brick, concrete, stone, wood, metal, ceramic, and plastic, it is the kind of tool that fits neatly into a busy DIY routine. If you are looking for a reliable machine for general repairs, furniture assembly, or light masonry work, the Bosch DIY UniversalImpact 730 Electric impact drill Manual points toward a tool designed to be straightforward and efficient.

At its core, the drill offers a 730 W rated input, a no-load speed of up to 3,200 rpm, and an impact rate of 48,000 bpm. That combination makes it suitable for everyday tasks where a compact but capable impact drill is more useful than a bulky professional rig. The 14 mm drilling capacity in masonry and concrete, 12 mm in steel, and 30 mm in wood cover most common household needs without overcomplicating the user experience.

One of the strongest points is its usability. The drill includes a keyless chuck for quick bit changes, a speed preselection wheel, constant electronic control, and a right/left rotation switch for screwdriving tasks. The auxiliary handle with depth stop adds stability and helps maintain cleaner, more consistent drilling depth. At 2.1 kg, it stays manageable in the hand, especially during longer sessions around the house.

Safety and comfort are also clearly part of the design. The manual highlights the use of hearing protection, proper grip, and dust control, especially when working with masonry or materials that create fine particles. That makes the tool feel thoughtfully designed rather than simply powerful. For users who want a dependable drill that can handle both routine and slightly tougher jobs, this Bosch model offers a solid mix of convenience and control.

In short, the UniversalImpact 730 is best suited to DIY users who want one drill for many jobs. It is not a specialist heavy-duty machine, but it is a well-rounded choice for drilling, light impact work, and occasional screwdriving.

Notes

  • Best for home DIY and mixed materials.
  • Use the auxiliary handle for better control.
  • Hearing protection is recommended during impact drilling.
  • Dust management matters when working with masonry or treated wood.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly