Manual.ly Logo

Bosch DIY UniversalHedgeCut 18-50 Manual

0.0 · 0 Ratings

PDF manual · 217 Pages

English

M: gpt-5.6-terra
page

/ 217

Loading...
217285c12524d6c8c7f525b675a08d9554cd page a
10 | English
dust. Power tools create sparks which may ignite the dust
or fumes.
u Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
u Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
u Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrigerat-
ors. There is an increased risk of electric shock if your
body is earthed or grounded.
u Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of elec-
tric shock.
u Do not abuse the cord. Never use the cord for carry-
ing, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
u When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
u If operating a power tool in a damp location is un-
avoidable, use a residual current device (RCD) protec-
ted supply. Use of an RCD reduces the risk of electric
shock.
Personal safety
u Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inatten-
tion while operating power tools may result in serious per-
sonal injury.
u Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask,
non-skid safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce personal in-
juries.
u Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
u Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal in-
jury.
u Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
u Dress properly. Do not wear loose clothing or jew-
ellery. Keep your hair and clothing away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
u If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
u Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe in-
jury within a fraction of a second.
Power tool use and care
u Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was de-
signed.
u Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
u Disconnect the plug from the power source and/or re-
move the battery pack, if detachable, from the power
tool before making any adjustments, changing ac-
cessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
u Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
u Maintain power tools and accessories. Check for mis-
alignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
u Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
u Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
u Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Service
u Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Hedge trimmer safety warnings
u Keep all parts of the body away from the blade. Do not
remove cut material or hold material to be cut when
blades are moving. Blades continue to move after the
F 016 L94 168 | (20.01.2021) Bosch Power Tools

Chat with your Bosch DIY UniversalHedgeCut 18-50 manual using AI

Get instant AI answers from your Bosch DIY UniversalHedgeCut 18-50 manual

Ask anything about the Bosch DIY UniversalHedgeCut 18-50. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend UniversalHedgeCut 18-50?

Yes No

Frequently Asked Questions

A

It is intended for cutting and trimming hedges and bushes in domestic and hobby gardens. Inspect the hedge before work and remove wire, cables, and foreign objects that could damage the cutting system.

Is this answer helpful?

A

Trim the sides first and the top last. For straighter sides, cut from bottom to top in the direction of growth. Stretching a guide string across the hedge can help create a level top edge.

Is this answer helpful?

A

The tooth opening is suitable for branches up to 20 mm in diameter. The tip of the blade is designed for cuts up to 25 mm in diameter. Avoid forcing the tool through unsuitable material.

Is this answer helpful?

A

Wear eye protection, sturdy gloves, non-slip substantial footwear, and long trousers. Hearing protection may also be appropriate because the stated sound power level for the UniversalHedgeCut 50 is 90 dB(A).

Is this answer helpful?

A

The hedge trimmer uses a blade-control switch on each handle. Both controls must be pressed at the same time for operation, helping prevent unintended activation when the tool is being handled or carried.

Is this answer helpful?

A

Disconnect power before cleaning or maintenance. Keep the product and ventilation slots clean, lubricate the blade with maintenance spray before use, and check fasteners and cutting parts for wear or damage. Do not spray or immerse the tool in water.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Double-sided cutting blade supports trimming in either direction or with side-to-side movements.
  • Two-hand switch control helps reduce accidental starts during hedge trimming.
  • Blade tip is designed to cut branches up to 25 mm in diameter.
  • Hand guard, insulated grips, and blade cover support safer handling and storage.
  • Designed for cutting and trimming hedges and bushes in domestic gardens.
VS

Disadvantages

  • The supplied specifications describe corded models, so a suitable outdoor power connection may be required.
  • At 3.5 kg for the UniversalHedgeCut 50, longer trimming sessions may cause fatigue.
  • The tool should not be used in rain, wet conditions, or during lightning risk.
  • Hidden wire and other hard objects can damage the blade or drive.
  • Regular blade lubrication and cleaning are needed for safe, reliable performance.
M: gpt-5.6-terra

Product Specification

Type

Hedge Trimmer

Cutting Length

19.69 in

Cutting Capacity

0.79 in

Special Features

Additional Handle

M: gpt-5.6-terra

Product Description

Bosch DIY UniversalHedgeCut 18-50 Cordless Hedge Trimmer - Read, Download & Print Free

The Bosch DIY UniversalHedgeCut 18-50 Cordless Hedge Trimmer is presented as a practical garden tool for shaping hedges and trimming shrubs around the home. It is designed for domestic gardening tasks, helping users maintain neat boundaries, refresh overgrown greenery, and create a more even finish across seasonal growth.

Designed for controlled hedge maintenance

A long cutting blade supports efficient work along hedge faces and top edges, while the double-sided blade design allows cutting in either direction. This makes it easier to use smooth forward movements or gentle side-to-side passes when refining a hedge line. For the cleanest result, start with the sides and then move to the top. Cutting upward along the direction of growth can also help prevent thin branches from being pushed outward.

The blade teeth are intended for routine branches and hedge material. The blade tip offers additional cutting capability for branches up to 25 mm in diameter, although it remains important to inspect the work area first. Remove wire, hidden cables, and other obstructions before trimming to protect both the blade and drive mechanism.

Safety-focused operation

Safe handling is central to this Bosch garden tool. It uses a two-hand control arrangement, requiring both switches to be activated during operation. This helps reduce the risk of accidental starting. An integrated hand guard, insulated gripping areas, and a protective blade cover support safer use, carrying, and storage.

Wear eye protection, sturdy gloves, substantial footwear, and long trousers when working. Keep children, pets, and other people at least 3 metres from the work area. Always hold the trimmer firmly with both hands, keep secure footing, and wait until the blades stop completely before putting it down.

Care and useful working notes

For consistent cutting performance, apply suitable maintenance spray to the blade before use and keep the tool and ventilation openings clean. Do not spray it with water or immerse it in water. Store it in a dry, secure place beyond the reach of children, with the blade cover fitted.

Notes

  • Check the hedge carefully for hidden wire or foreign objects before cutting.
  • Work in daylight or strong artificial light for better visibility.
  • Replace worn or damaged parts with Bosch-approved components.
  • Stop work if blades become unusually hot, noisy, or vibrate excessively.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly