Manual.ly Logo

Bosch DIY UniversalChainPole 18 Manual

3.6 · 8 Ratings

PDF manual · 369 Pages

English

M: OA-GPT-54-NAN
page

/ 369

Loading...
1c0704eeebe887df1dff82c266a68d4dac8f page 15
English | 21
Bosch Power Tools F 016 L81 582 | (28.9.17)
Continuous Lighting of the Battery Charge
Indicator
Continuous lighting of the battery charge
indicator indicates that the battery is fully
charged or that the temperature of the battery is not within
the allowable charging temperature range, and cannot be
charged for this reason. The battery is charged as soon as the
allowable charging temperature range is reached.
When the battery is not inserted, continuous lighting of the
battery charge indicator indicates that the mains plug is
inserted in the socket and that the battery charger is ready for
operation.
Troubleshooting – Causes and Corrective
Measures
Charging Advice
With continuous or several repetitive charging cycles without
interruption, the charger can warm up. This does not indicate
a technical defect of the battery charger.
A significantly reduced working period after charging
indicates that the battery is used and must be replaced.
Assembly
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as during
transport and storage, remove the battery from the
power tool. There is danger of injury when unintentionally
actuating the On/Off switch with the locking button.
Tool assembly (see figure C+E)
Fit the pole pruner head together with the telescopic handle,
tighten them together with the connector 6 by twisting it.
Make sure that both parts are properly fitted.
Attach the harness 11 to the harness loops 10/13 located in
the handling areas. Please notice that the harness has two
hooks that are different in size. Make sure that the bigger
hook 20 is fitted onto the main handle harness loop 13 and
the smaller hook 19 onto the front handle harness loop 10.
Remove the saw chain cover.
Adjusting the telescopic height (see figure F)
Loosen the telescopic height adjustment joint 8 by rotating,
extend the telescopic tube 7 to the required length and re-
tighten the adjustment joint 8 by twisting.
The telescopic tube 7 can be extended from 2.1 m to 2.60 m
depending on the application.
Adjusting the pivoting head (see figure H)
Press two pivoting head adjustment buttons 4
simultaneously, adjust the pivoting head to the required
position by moving the pruner head upwards or downwards,
release the pivoting head adjustment buttons 4 and make
sure that the pruner head is properly locked.
Pivoting head can be adjusted to 9 different positions.
Tensioning the saw chain (see figure J)
Always check the chain tension before use, after the first cuts
and regularly during use approx. every 10 minutes. Upon
initial operation, new chains can lengthen considerably.
Always tension the chain when it is cold. Tensioning when it is
hot can result in over tensioning.
–The saw chain 1 is correctly tensioned when it can be
raised approx. 2–3 mm from the chain bar in the centre.
This should be done by using one hand to raise the saw
chain against the weight of the machine.
– Turn the chain tensioning screw 5 with the hex key
clockwise (increase tension) or anticlockwise (decrease
tension) to adjust the tension.
Saw chain lubrication (see figure I)
Note: The pole pruner is not supplied filled with oil. It is
essential to fill with oil before use. Operating the pole pruner
without chain oil or when the oil level is below the minimum
mark will result in damage to the saw chain.
Chain life and cutting capacity depend on optimum
lubrication. Therefore, the saw chain is automatically
lubricated with chain oil during operation.
Filling the oil reservoir:
– Set pole pruner on any suitable flat surface with the oil filler
cap 3 facing upward.
– Clean area around the oil filler cap 3 with a cloth and
unscrew the cap.
– Add Bosch biodegradable chainsaw oil until reservoir is
full. Use of non approved oil may impair the performance
of the oiling system.
– Oil becomes denser at lower temperatures which
decreases the flow rate of oil.
– Avoid dirt or debris from entering the oil reservoir.
Cause Corrective Measure
Continuous lighting of the battery charge indicator
Flashing red battery charge indicator
No charging procedure possible
The battery is not attached
(correctly)
Attach battery to charger
correctly
Battery contacts
contaminated
Clean the battery contacts
(e.g. by inserting and
removing the battery several
times) or replace the battery
Battery pack defective Replace the battery
Battery charge indicators or do not light up
Mains plug of battery
charger not plugged in
(properly)
Insert mains plug (fully) into
the socket outlet
Socket outlet, mains cable
or battery charger defective
Check the mains voltage;
have the battery charger
checked by an authorised
after-sales service agent for
Bosch power tools
OBJ_BUCH-3155-001.book Page 21 Thursday, September 28, 2017 9:14 AM

Chat with your Bosch DIY UniversalChainPole 18 manual using AI

Get instant AI answers from your Bosch DIY UniversalChainPole 18 manual

Ask anything about the Bosch DIY UniversalChainPole 18. Answers come from this manual, with the pages they are based on.

UniversalChainPole 18 Maintenance Schedule

Every 10 minutes
Check chain tension

Always check the chain tension before use, after the first cuts and regularly during use approx. every 10 minutes.

Show in the manual (page 21)
Before storage
Clean tool and drain oil

Clean the tool with a cloth before storage and remove the oil from the reservoir.

Show in the manual (page 23)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend UniversalChainPole 18?

Yes No
0
User Pic

Laura Schmidt

9 months ago

How powerful is this cordless pole pruner for thicker branches, and does the chain oil really run out quickly?

0
User Pic

Manual.ly

9 months ago

Based on customer experience, it is mainly suitable for regular yard work and thinner to medium branches. If you need to cut much thicker, harder wood, you may feel the power is limited and a more powerful model could be better. For the oil: some users report faster oil usage, so it helps to check the oil tank before each session, refill with the recommended chain oil, and keep the cutting setup clean (chain/bar properly mounted and lubricated). If the saw is used continuously for long sessions or the chain is dull, consumption can increase. Using the right oil and maintaining the chain typically improves lubrication and cutting performance.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is designed for pruning trees and shrubs from the ground, especially branches that are too high to reach safely by hand. It is intended for home garden use rather than professional landscaping.

Is this answer helpful?

A

This version includes a 2.5Ah battery, and the manual also references compatible Bosch chargers. Battery and charger availability can vary by market, so checking the package contents is recommended.

Is this answer helpful?

A

The telescopic shaft can be adjusted from 2.1 m to 2.6 m. That extra reach helps you trim elevated branches without using a ladder, which improves stability and safety.

Is this answer helpful?

A

The maximum cutting diameter is listed at 15 cm. It works best on regular pruning tasks and branches within its intended capacity, rather than thick trunks or very hard wood.

Is this answer helpful?

A

Yes, the pruner features automatic chain lubrication. You still need to fill the oil tank before use and monitor the oil level during operation for best performance.

Is this answer helpful?

A

Wear gloves and eye protection, keep both hands on the tool, check chain tension and oil level, avoid using it in wet conditions, and never operate it from a ladder or tree.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Cordless 18V design gives freedom of movement and easy handling in the garden.
  • Telescopic reach of 2.1–2.6 m helps trim higher branches while standing safely on the ground.
  • Automatic chain lubrication supports smoother cutting and reduces chain wear.
  • Nine pivoting head positions improve cutting angles for awkward branches.
VS

Disadvantages

  • Not intended for ladder use, so it cannot replace every high-access pruning job.
  • A 15 cm cutting limit means it is better for routine pruning than heavy-duty cutting.
  • Oil must be added before use, and chain tension needs regular checking.
  • The 2.5Ah battery is practical for home tasks, but extended sessions may require recharging.
M: OA-GPT-54-NAN

Product Specification

Type

Pole pruner

Battery

1x Battery (18V, 2.5Ah, Li-Ion)

Bar length

7.87 in

Chain speed

13.12 ft/s

Chain pitch

3/8"

Chain oil tank

2.03 fl oz

Features

Additional handle, telescopic (6.89-8.53ft), automatic chain lubrication

Vibration level

16.15 ft/s^2

Noise level

92dB(A)

Weight

7.94 lb (incl. battery)

Scope of delivery

Charger, 1x battery, bar cover, shoulder strap

M: OA-GPT-54-NAN

Product Description

Bosch DIY UniversalChainPole 18 Cordless Pole Pruner: Reach Higher with Confidence

The Bosch DIY UniversalChainPole 18 Cordless Pole Pruner incl. 2.5Ah battery Manual highlights a tool designed for homeowners who want cleaner, safer pruning without climbing a ladder. Built for trimming trees and shrubs from the ground, it combines cordless freedom with practical reach, making seasonal garden care feel far less demanding.

At the heart of the tool is Bosch’s familiar DIY approach: straightforward operation, balanced handling, and enough power for routine branch work. The 18V lithium-ion battery keeps the pruner portable, while the included 2.5Ah battery offers a solid starting point for home use. With a telescopic reach from 2.1 m to 2.6 m, it helps users access higher branches that would otherwise require awkward stretching or unstable footing.

The cutting setup is compact but capable. A 20 cm chain bar, 4.0 m/s chain speed, and a maximum cutting diameter of 15 cm make it suitable for pruning medium branches and managing dense growth. Bosch also includes automatic chain lubrication, which supports smoother cutting and helps extend chain life during regular use. The 9-position pivoting head adds flexibility, letting users adapt the cutting angle to the shape of the tree or shrub.

Safety and control are clearly central to the design. The insulated grip areas, two-handed handling, and lock-off switch help reduce accidental starts and improve confidence during use. The manual also emphasizes essential habits such as checking chain tension, keeping the oil tank filled, and replacing worn parts promptly. Those details may seem simple, but they are exactly what keeps a pole pruner working well over time.

For a DIY gardener, this model stands out as a practical middle ground between manual loppers and heavier professional equipment. It is light enough to manage at 3.6 kg, yet structured to handle real pruning jobs around the yard. The result is a tool that feels tailored to home maintenance rather than commercial landscaping.

Notes

  • Best suited for domestic tree and shrub pruning
  • Use only with the correct Bosch battery and charger
  • Keep the chain oiled and properly tensioned
  • Always wear gloves and eye protection
  • Not intended for ladder use or non-wood materials
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly