Manual.ly Logo

Bosch DIY PWS 1900 Manual

0.0 · 0 Ratings

PDF manual · 281 Pages

English

M: OA-GPT-54-NAN
page

/ 281

Loading...
44850d0b458d26b05f4ebd28414efb37730e page f
English | 15
Bosch Power Tools 1 609 92A 222 | (24.8.16)
Deutschland
Robert Bosch Power Tools GmbH
Servicezentrum Elektrowerkzeuge
Zur Luhne 2
37589 Kalefeld – Willershausen
Unter www.bosch-pt.com können Sie online Ersatzteile be-
stellen oder Reparaturen anmelden.
Kundendienst: Tel.: (0711) 40040480
Fax: (0711) 40040481
E-Mail: Servicezentrum.Ele[email protected]
Anwendungsberatung: Tel.: (0711) 40040480
Fax: (0711) 40040482
E-Mail: [email protected]sch.com
Österreich
Unter www.bosch-pt.at können Sie online Ersatzteile bestel-
len.
Tel.: (01) 797222010
Fax: (01) 797222011
E-Mail: service.elektrowerkzeuge@at.bosch.com
Schweiz
Unter www.bosch-pt.com/ch/de können Sie online Ersatz-
teile bestellen.
Tel.: (044) 8471511
Fax: (044) 8471551
E-Mail: [email protected]h.com
Luxemburg
Tel.: +32 2 588 0589
Fax: +32 2 588 0595
E-Mail: outillage.gere[email protected]osch.com
Entsorgung
Elektrowerkzeuge, Zubehör und Verpackungen sollen einer
umweltgerechten Wiederverwertung zugeführt werden.
Werfen Sie Elektrowerkzeuge nicht in den Hausmüll!
Nur für EU-Länder:
Gemäß der Europäischen Richtlinie
2012/19/EU über Elektro- und Elektronik-
Altgeräte und ihrer Umsetzung in nationales
Recht müssen nicht mehr gebrauchsfähige
Elektrowerkzeuge getrennt gesammelt und
einer umweltgerechten Wiederverwertung
zugeführt werden.
Änderungen vorbehalten.
English
Safety Notes
General Power Tool Safety Warnings
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
WARNING
OBJ_BUCH-2397-004.book Page 15 Wednesday, August 24, 2016 3:58 PM

Chat with your Bosch DIY PWS 1900 manual using AI

Get instant AI answers from your Bosch DIY PWS 1900 manual

Ask anything about the Bosch DIY PWS 1900. Answers come from this manual, with the pages they are based on.

PWS 1900 Maintenance Schedule

Regularly
Clean ventilation slots

Blow out ventilation slots frequently to prevent dust accumulation which can cause electrical hazards.

Before each use
Inspect grinding tools

Check accessories for chips, cracks, wear, or damage before every use and after dropping the tool.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend PWS 1900?

Yes No

Frequently Asked Questions

A

It is mainly used for cutting, roughing, and brushing metal or stone. With approved accessories, it can also handle sanding tasks. It is best for DIY workshops, renovation work, and general material removal.

Is this answer helpful?

A

Yes, but only with the correct cutting guard and proper dust extraction. A diamond cutting disc is recommended, and dry cutting is required. Safety gear, especially a dust mask, is strongly advised.

Is this answer helpful?

A

Yes. It can use a quick-clamping nut for faster disc changes without extra tools. The spindle lock also helps when mounting or removing compatible grinding tools.

Is this answer helpful?

A

No. It is not designed for polishing. It is better suited to grinding, cutting, brushing, and sanding tasks where material removal is needed.

Is this answer helpful?

A

It supports grinding discs up to 230 mm in diameter, with an M14 spindle thread. Always check that the disc speed rating matches or exceeds the tool's rated speed.

Is this answer helpful?

A

Use the proper guard, keep the workpiece secured, wear eye and hearing protection, and avoid touching discs until they cool. Also check for restart protection on supported versions.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 1900 W motor delivers strong cutting and grinding performance for demanding DIY jobs.
  • 230 mm disc capacity makes it suitable for larger surfaces and deeper cuts.
  • Works with grinding, cutting, brushing, and sanding accessories for versatile use.
  • Safety-focused features include guards, spindle lock, and optional restart protection.
VS

Disadvantages

  • Corded design limits mobility compared with cordless grinders.
  • At 230 mm and 5.4–5.5 kg, it can feel heavy during long sessions.
  • Not intended for polishing, so it is less versatile than some all-purpose tools.
  • Stone cutting needs strong dust control and the right accessories to stay safe.
M: OA-GPT-54-NAN

Product Specification

Type

Angle grinder

Power

1,900W (230V)

No-load speed

6,600/min

Disc diameter

9.06 in

Tool holder

M14 spindle thread, Spindle lock

Features

Auxiliary handle, Vibration damping

Weight

12.13 lb

M: OA-GPT-54-NAN

Product Description

Bosch DIY PWS 1900 Electric Angle Grinder

The Bosch DIY PWS 1900 Electric Angle Grinder is built for users who want serious cutting and grinding performance in a familiar, easy-to-handle format. With a 1900 W motor, a 230 mm disc capacity, and a rated speed of 6600 rpm, it is designed for demanding workshop tasks on metal and stone. It also supports sanding and brushing with the right accessories, making it a flexible choice for renovation, repair, and general DIY work.

What makes this grinder stand out is its practical balance of power and control. Bosch includes an auxiliary handle for better grip, a protective guard system for grinding and cutting, and a spindle lock to simplify disc changes. For added convenience, the quick-clamping nut helps speed up accessory swaps without extra tools. Some versions also feature restart protection and reduced starting current, which improve usability and safety during everyday work.

This model is especially useful when you need to cut metal profiles, clean rough surfaces, or work on masonry with the correct cutting disc and dust extraction setup. The Bosch DIY PWS 1900 Electric Angle Grinder Manual highlights how important it is to match the right disc, guard, and working method to the task. That guidance matters, because the tool is powerful enough to remove material quickly, but it also demands careful handling, proper protection, and regular maintenance.

In real-world use, the grinder feels like a dependable all-rounder for home workshops and light professional jobs. It is not meant for polishing, and it is definitely not a tool to rush. But when paired with the proper accessories, it can save time on grinding welds, trimming metal, shaping stone, and smoothing surfaces. The vibration-damping handle on some variants also improves comfort during longer sessions.

Notes

  • Always use the correct guard for grinding or cutting.
  • Let discs cool before touching or changing them.
  • Use dust extraction and a respirator when cutting stone.
  • Check disc condition before every use.
  • Secure the workpiece for safer, cleaner results.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly