Manual.ly Logo

Bosch DIY PST 800 PEL Manual

4.8 · 5 Ratings

PDF manual · 87 Pages

English

M: OA-GPT-54-NAN
page

/ 87

Loading...
bf3ccbbf22d1ad249a2ac23abd00e5a63c6c page 11
English | 17
Bosch Power Tools 1 609 92A 1ZE | (13.1.16)
Working Advice
Before any work on the machine itself, pull the mains
plug.
When working small or thin workpieces, always use a
stable support or a saw station (Bosch PLS 300).
Saw with moderate pressure in order to achieve optimal and
precise cutting results.
For long and straight cuts in thick wood (>40 mm), the cut-
ting line can become inaccurate. In this case, using a Bosch
circular saw is recommended to achieve accurate cuts.
Plunge Cutting (see figure H)
Plunge cuts may only be applied to soft materials, such
as wood, gypsum plaster boards, etc.!
Use only short saw blades for plunge cutting. Plunge cutting is
possible only with the mitre angle set at 0°.
Place the machine with the front edge of the base plate 6 on
to the workpiece without the saw blade 15 touching the work-
piece and switch on. For machines with stroke rate control,
select the maximum stroke rate. Firmly hold the machine
against the workpiece and by tilting the machine, slowly
plunge the saw blade into the workpiece.
When the base plate 6 fully lays on the workpiece, continue
sawing along the desired cutting line.
Coolant/Lubricant
When sawing metal, coolant/lubricant should be applied
alongside cutting line because of the material heating up.
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself, pull the mains
plug.
For safe and proper working, always keep the machine
and ventilation slots clean.
Clean the saw blade holder regularly. For this, remove the saw
blade from the machine and lightly tap out the machine on a
level surface.
Heavy contamination of the machine can lead to malfunc-
tions. Therefore, do not saw materials that produce a lot of
dust from below or overhead.
In extreme conditions, always use dust extraction as
far as possible. Blow out ventilation slots frequently
and install a portable residual current device (PRCD).
When working metals, conductive dust can settle in the in-
terior of the power tool. The total insulation of the power
tool can be impaired.
Lubricate the guide roller 14 occasionally with a drop of oil.
Check the guide roller 14 regularly. If worn, it must be re-
placed through an authorised Bosch after-sales service agent.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschse[email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
OBJ_BUCH-1065-007.book Page 17 Wednesday, January 13, 2016 12:32 PM

Chat with your Bosch DIY PST 800 PEL manual using AI

Get instant AI answers from your Bosch DIY PST 800 PEL manual

Ask anything about the Bosch DIY PST 800 PEL. Answers come from this manual, with the pages they are based on.

PST 800 PEL Maintenance Schedule

Regularly
Clean saw blade holder

Remove the saw blade and tap the tool lightly on a level surface to clean out dust. Heavy contamination can cause malfunctions.

Show in the manual (page 17)
Frequently
Blow out ventilation slots

Use compressed air to blow out ventilation slots frequently, especially when working in extreme conditions or with metals.

Show in the manual (page 17)
Occasionally
Lubricate guide roller

Apply a drop of oil to the guide roller occasionally to ensure smooth operation.

Show in the manual (page 17)
Regularly
Check guide roller condition

Inspect the guide roller regularly for wear. If worn, it must be replaced by an authorized Bosch service agent.

Show in the manual (page 17)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend PST 800 PEL?

Yes No
0
User Pic

Maria Keller

9 months ago

Does this Bosch jigsaw have an easy, tool-free blade change and come with fast delivery and updates?

0
User Pic

Manual.ly

9 months ago

Yes. Customers report the blade can be changed easily, without tools, and the saw has a protective blade cover for safer use. Handling is also described as precise and smooth, making it easy to guide during cuts. Delivery is fast, and you get an email notification when the shipment is on the way, so you can plan ahead.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is designed for wood, plastic, metal, ceramic plates, and rubber. Blade choice matters, so using the right blade for the material gives the best finish and safety.

Is this answer helpful?

A

Yes. The base plate can be tilted for mitre cuts up to 45° left or right. For best accuracy, the saw includes angle markings and works well with a test cut.

Is this answer helpful?

A

Cut Control helps guide the saw along a marked cutting line. It is especially useful when you want more visible alignment and cleaner follow-through on straight or angled cuts.

Is this answer helpful?

A

Yes. A vacuum hose can be connected to the dust extraction port. This helps keep the work area cleaner and can improve visibility along the cutting line.

Is this answer helpful?

A

Yes, but only for soft materials such as wood or gypsum board, and only at a 0° angle. Short saw blades are recommended for this type of cut.

Is this answer helpful?

A

It combines variable speed, orbital action, blade storage, a splinter guard, and an included case. These features make it practical for home projects and easier to store between uses.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Versatile enough for wood, plastic, metal, tiles, and rubber.
  • Adjustable pendulum action improves speed and cut quality.
  • Cut Control and splinter guard help support cleaner, more accurate cuts.
  • Lightweight design and included case make handling and storage easier.
VS

Disadvantages

  • Long straight cuts in thick wood may be less precise than a circular saw.
  • Plunge cutting is limited to soft materials and 0° cuts only.
  • Dust cover and some accessories cannot be used in every cutting mode.
  • Noise and vibration are noticeable, so longer work may need pauses.
M: OA-GPT-54-NAN

Product Specification

Type

Orbital Jigsaw

Power

530 W

No-load Stroke Rate

500-3,000/min

Cutting Capacity

Wood 3.15 in, Metal 0.20 in, Aluminum 0.47 in

Blade Tilt

45deg/45deg left/right

Tool Holder

Quick-change System (SDS)

Features

Orbital action (4-stage), Stroke rate control, LED work light, Soft grip, Dust extraction, Dust blower, Tilt function

Weight

4.41 lb

Scope of Delivery

Case

M: OA-GPT-54-NAN

Product Description

Bosch DIY PST 800 PEL Electric Pendulum Jigsaw incl. Case Manual

The Bosch DIY PST 800 PEL Electric pendulum jigsaw incl. case Manual highlights a compact corded jigsaw made for everyday DIY cutting with a surprising amount of control. It is built to handle straight cuts, curves, and mitre cuts up to 45°, while working across wood, plastic, metal, ceramic tiles, and rubber. With a 530 W motor and variable stroke control, it aims to give users a practical balance of speed and precision.

A major strength of this saw is its adjustable pendulum action. Lower settings help create cleaner edges, while stronger settings improve cutting progress in softer materials. That flexibility is useful when switching between tasks, such as fine panel work, trimming sheet metal, or following the grain in wood. For thin materials, the pendulum can be switched off completely, which helps improve control and reduce roughness.

The design also supports more accurate results. The Cut Control system helps guide the blade along a marked line, making visible cuts easier to follow. A built-in sawdust blower keeps the cutting area clearer, and dust extraction can be connected for tidier work. Bosch also adds small but useful details such as blade storage in the base plate, a splinter guard for cleaner wood edges, and a secure base plate that helps the saw stay stable during use.

Comfort and usability matter here too. The insulated handle gives a confident grip, while the lock-on switch can help during longer sessions. The tool is light enough for regular home projects, yet powerful enough for common renovation tasks. Because it is supplied with a case, storage and transport become easier, and all the essentials stay in one place.

While it is not a specialist saw for every heavy-duty job, it performs well as a versatile workshop companion. Its 20 mm stroke, adjustable speed, and thoughtful accessories make it a strong fit for users who want one jigsaw for many materials and many types of cuts.

Notes

  • Best for DIY users who want one tool for mixed materials.
  • Use the correct blade and speed setting for the cleanest result.
  • Dust extraction is helpful when working on finer or messier cuts.
  • A test cut is recommended before final visible or angled cuts.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly