Manual.ly Logo

Bosch DIY PSR 1800 LI-2 Manual

0.0 · 0 Ratings

PDF manual · 191 Pages

English

M: gpt-5.6-terra
page

/ 191

Loading...
1591920ca8ad958d9ce0cf4c7373a0fd8562 page b
English | 11
English
Safety Instructions
General Power Tool Safety Warnings
WARNING
Read all safety warnings, instruc-
tions, illustrations and specifica-
tions provided with this power tool. Failure to follow all in-
structions listed below may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cord-
less) power tool.
Work area safety
u Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
u Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
u Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
u Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
u Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrigerat-
ors. There is an increased risk of electric shock if your
body is earthed or grounded.
u Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of elec-
tric shock.
u Do not abuse the cord. Never use the cord for carry-
ing, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
u When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
u If operating a power tool in a damp location is un-
avoidable, use a residual current device (RCD) protec-
ted supply. Use of an RCD reduces the risk of electric
shock.
Personal safety
u Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inatten-
tion while operating power tools may result in serious per-
sonal injury.
u Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask,
non-skid safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce personal in-
juries.
u Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
u Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal in-
jury.
u Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
u Dress properly. Do not wear loose clothing or jew-
ellery. Keep your hair and clothing away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
u If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
u Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe in-
jury within a fraction of a second.
Power tool use and care
u Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was de-
signed.
u Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
u Disconnect the plug from the power source and/or re-
move the battery pack, if detachable, from the power
tool before making any adjustments, changing ac-
cessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
u Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
u Maintain power tools and accessories. Check for mis-
alignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
Bosch Power Tools 1 609 92A 6DG | (07.06.2021)

Chat with your Bosch DIY PSR 1800 LI-2 manual using AI

Get instant AI answers from your Bosch DIY PSR 1800 LI-2 manual

Ask anything about the Bosch DIY PSR 1800 LI-2. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend PSR 1800 LI-2?

Yes No

Frequently Asked Questions

A

It is designed for driving and removing screws and for drilling in wood, metal, ceramic, and plastic. It is well suited to furniture assembly, shelves, fittings, repairs, and general DIY work.

Is this answer helpful?

A

The PSR 1800 LI-2 provides up to 38.5 Nm for hard screwdriving applications and 18.5 Nm for soft screwdriving applications, measured according to ISO 5393.

Is this answer helpful?

A

It has a mechanical two-speed gearbox. First gear operates from 0 to 400 rpm for controlled screwdriving and larger holes. Second gear operates from 0 to 1,350 rpm for smaller drill diameters and faster drilling.

Is this answer helpful?

A

It can drill wood, metal, ceramic, and plastic. The stated maximum drilling diameters are 30 mm in wood and 10 mm in steel. Maximum screw diameter is 8 mm.

Is this answer helpful?

A

Yes. An integrated work light illuminates the work area when the trigger is pressed, which is useful for work in low-light spaces such as cabinets, corners, or utility areas.

Is this answer helpful?

A

The charge indicator has three green LEDs. Three lights indicate at least 75 percent charge, two indicate 50 to 75 percent, one indicates 26 to 50 percent, and one slowly flashing light indicates 25 percent or less.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • 18 V cordless design provides strong performance for common household drilling and screwdriving.
  • Two 1.5 Ah lithium-ion batteries help limit downtime between charging sessions.
  • Two-speed gearbox, variable trigger, and 20 torque settings support controlled work.
  • Keyless 1-10 mm chuck enables quick bit changes without a chuck key.
  • Integrated LED light and carry case improve usability, visibility, storage, and transport.
VS

Disadvantages

  • Maximum drilling capacity is limited to 10 mm in steel and 30 mm in wood.
  • At about 1.5 kg with a battery, it may feel heavier than compact entry-level drills.
  • Accessories shown in product illustrations may not all be standard supply items.
  • Performance is reduced in temperatures below 0 C.
  • It is intended for wood, metal, ceramic, and plastic, not heavy masonry drilling.
M: gpt-5.6-terra

Product Specification

Type

Drill/driver

Battery

2 x battery (18 V, 1.5 Ah, lithium-ion)

No-load speed

0-400/0-1,350 rpm

Drilling capacity

Wood 1.18 in, steel 0.39 in

Screw diameter

0.31 in

Torque

13.28/28.03 lb-ft, 21 settings (20+1)

Tool holder

0.04-0.39 in keyless chuck

Features

Forward/reverse rotation, speed control, multi-speed, torque preselection, charge level indicator, LED work light, soft grip

Weight

2.65 lb

Included

Case (SystemBox), charger, 2 x batteries, 241-piece accessory set

M: gpt-5.6-terra

Product Description

Bosch DIY PSR 1800 LI-2 Cordless Drill Driver incl. Case + 2 Batteries 1.5Ah + Accessories - Read, Download & Print Free

The Bosch DIY PSR 1800 LI-2 Cordless Drill Driver incl. Case + 2 Batteries 1.5Ah + Accessories is a practical 18 V tool designed for home repairs, furniture assembly, and everyday DIY projects. Its cordless design makes it easy to move between rooms, work outdoors, or reach areas where a mains cable would be inconvenient.

Built for drilling and screwdriving

This drill driver is suitable for driving and removing screws as well as drilling into wood, metal, ceramic, and plastic. It delivers up to 38.5 Nm of hard torque and 18.5 Nm of soft torque, giving it useful strength for typical household jobs. The maximum drilling capacity is 30 mm in wood and 10 mm in steel, while the maximum screw diameter is 8 mm.

A two-speed gearbox helps match the tool to the task. First gear provides controlled low-speed power for screwdriving and larger drill diameters. Second gear reaches up to 1,350 rpm for quicker work with smaller drill bits. The variable-speed trigger adds further control, allowing users to begin slowly and increase speed as needed.

Easy adjustment and convenient handling

The PSR 1800 LI-2 includes a 20-stage torque setting ring for controlled screwdriving. Selecting the appropriate setting helps prevent overdriving screws or damaging delicate materials. A dedicated drilling setting disengages the torque clutch when full drilling power is required.

Its keyless chuck accepts accessories from 1 to 10 mm and allows fast bit changes without a separate key. The forward and reverse switch supports both driving and loosening screws, while direction indicators make the selected rotation clear. An integrated work light improves visibility in cupboards, corners, and other dim spaces.

Ready for repeat DIY tasks

Two 1.5 Ah lithium-ion batteries are included, helping reduce interruptions during longer jobs. The battery charge indicator uses three green LEDs to show the remaining charge level. Lithium-ion technology can be recharged without waiting for a full discharge, and electronic protection helps guard against deep discharge.

At approximately 1.5 kg, depending on the battery used, this drill driver balances portable handling with capable 18 V performance. The supplied case keeps the tool, batteries, and accessories together for organized storage and transport.

Notes

  • Use approved Bosch PBA 18 V batteries and compatible AL 18 chargers.
  • Wear eye protection and use suitable dust control when drilling.
  • Check for hidden cables, pipes, and other services before drilling.
  • Remove the battery before changing accessories, cleaning, or storage.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly