Manual.ly Logo

Bosch DIY PSR 18 LI-2 Manual

4.0 · 1 Ratings

PDF manual · 75 Pages

English

M: OA-GPT-5-NAN
page

/ 75

Loading...
f07fb7c80ee85630359eb88bd0de88498271 page 8
8 | English
1 609 92A 13U | (2.2.15) Bosch Power Tools
Schweiz
Batrec AG
3752 Wimmis BE
Änderungen vorbehalten.
English
General Power Tool Safety Warnings
Read all safety warnings and all in-
structions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges and moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal inju-
ries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a ro-
tating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
WARNING
OBJ_BUCH-1915-004.book Page 8 Monday, February 2, 2015 1:36 PM

Chat with your Bosch DIY PSR 18 LI-2 manual using AI

Get instant AI answers from your Bosch DIY PSR 18 LI-2 manual

Ask anything about the Bosch DIY PSR 18 LI-2. Answers come from this manual, with the pages they are based on.

PSR 18 LI-2 Maintenance Schedule

Before every work
Check moving parts and damage

Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect operation. Have damaged parts repaired before use.

After each use
Clean machine and ventilation slots

Keep the machine and ventilation slots clean to ensure safe and proper working conditions.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend PSR 18 LI-2?

Yes No
0
User Pic

Ricardo Smith

10 months ago

Is the power switch/selector button difficult to press, and does it affect everyday use?

0
User Pic

Manual.ly

10 months ago

Some users report that the switch button can feel a bit stiff or harder to press than expected. In most cases, it is more noticeable when using the tool frequently or with gloves. For best results, press firmly and straight, and do not apply sideways force. If the switch becomes increasingly difficult, sticks, or feels loose, please stop using it and contact support for inspection or a replacement under the warranty. For home use, the tool's performance is described as sufficient and comfortable in the hand despite this minor usability point.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

Solo indicates the product is supplied as the drill/driver body only; batteries, charger and accessory bits are typically not included and must be purchased separately.

Is this answer helpful?

A

The drill driver is designed for driving screws and drilling into wood, metal, ceramic and plastics for typical household and DIY applications; use appropriate bits and settings for each material.

Is this answer helpful?

A

When the On/Off switch is pressed partially or fully, a 3-LED battery charge indicator displays the battery state for several seconds; rapid flashing signals out-of-range battery temperature or overload protection activation.

Is this answer helpful?

A

Keep the work area clean and well-lit, wear eye protection and other PPE as needed, avoid working in explosive atmospheres, disconnect the battery before adjustments, and hold the tool by insulated gripping areas when near concealed wiring.

Is this answer helpful?

A

Keep the tool and ventilation slots clean, check moving parts for damage or binding, replace damaged parts before use, use recommended chargers and batteries, and have repairs done by qualified service personnel using original parts.

Is this answer helpful?

A

Users can transport batteries by road without further requirements, but air or third-party shipping requires compliance with dangerous goods packaging and labeling rules; batteries must be undamaged and contacts taped if shipped.

Is this answer helpful?

A

The tool automatically switches off when the selected torque is reached and the LED indicator flashes three times; after release, the LED shows the last effective torque for series screwdriving setup.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Compact, lightweight design suited for extended DIY use and easy handling.
  • Two-speed gearbox and adjustable torque for precise screwdriving and faster drilling.
  • LED work light and battery charge indicator for better visibility and monitoring.
  • Compatible with Bosch 18V Li‑Ion ecosystem for flexible battery and charger options.
  • Automatic torque cutoff protects fasteners and prevents overdriving.
VS

Disadvantages

  • Sold as a solo unit—battery and charger are not included, adding to total cost.
  • Not intended for heavy industrial use; limited for demanding professional workloads.
  • Performance can be affected at temperatures outside recommended battery range.
  • Requires familiarity with Bosch battery safety and transport regulations.
  • Some accessories and spare parts must be purchased separately.
M: OA-GPT-5-NAN

Product Specification

Type

Drill driver

Battery

18V, Li-ion

No-load speed

0-400/0-1340/min

Drilling capacity

Wood 1.38 in, Steel 0.39 in

Screw diameter

0.39 in

Torque

221.27/407.13 in-lb soft/hard, 25 stages

Chuck type

Keyless chuck

Features

Forward/reverse operation, Speed control, Multi-gear, Torque preselection, Charge level indicator, LED work light, Auto-Lock

Weight

2.87 lb

Scope of delivery

without charger and battery

M: OA-GPT-54-NAN

Product Description

Bosch DIY PSR 18 LI-2 cordless drill driver solo Manual

The Bosch DIY PSR 18 LI-2 cordless drill driver is a compact, user-friendly tool designed for everyday DIY tasks. Lightweight and ergonomically balanced, this solo unit (body only) accepts Bosch 18V Li‑Ion batteries to deliver reliable torque for driving screws and drilling into wood, metal, plastics and ceramic tiles. It combines ease of use with Bosch safety and quality standards, making it suitable for homeowners, hobbyists and light trades work.

Key features and design

With two-speed gearing and an adjustable torque selector, the PSR 18 LI-2 provides controlled power for both delicate screwdriving and higher-speed drilling. An integrated LED work light illuminates the immediate work area for improved visibility in dim conditions. The chuck accepts common bit sizes, and the insulated grip area supports safe handling when working near concealed wiring. The tool’s design emphasizes maintenance access and clear LED battery indicators so users can check charge status quickly.

Performance and usability

The drill driver offers sufficient maximum torque for typical household projects such as furniture assembly, shelf installation and light renovation tasks. Its no-load speeds in first and second gears accommodate precision screwdriving and faster drilling operations. Battery-integration compatibility with Bosch chargers and recommended batteries ensures stable runtime and safe charging. The unit’s automatic torque cutoff protects fasteners and workpieces by stopping when the preselected torque is reached.

Safety and maintenance

Built-in safety guidance mirrors Bosch’s extensive warnings: use insulated gripping surfaces when working near hidden electrical conductors, keep the work area clear and well-lit, and follow recommended personal protective equipment (eye protection, hearing protection, dust masks) when required. Routine maintenance—keeping ventilation slots clean, checking for damaged parts, and using original replacement components—helps prevent accidents and extends the tool’s service life. Lithium‑ion batteries must be transported, stored and disposed of according to applicable regulations.

Who it’s for

The PSR 18 LI-2 solo is ideal for DIY enthusiasts and homeowners who already own compatible 18V Bosch batteries or want a lightweight, reliable cordless driver for general-purpose tasks. Its balance of torque control, compactness and safety features makes it a versatile addition to a domestic toolkit.

Notes:

  • This listing refers to the drill driver body (solo) and typically excludes battery, charger and application bits.
  • Charge the battery fully before first use and follow Bosch guidelines for battery temperature ranges and safe transport.
  • Regularly inspect and maintain the tool; use only recommended accessories and replacement parts.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly