English | 15
Bosch Power Tools 1 609 92A 1LU | (10.11.15)
When operating a power tool outdoors, use an exten-
sion cord suitabl e for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp lo cation is unavoid-
able, use a residual current device (RCD) pr otected
supply. Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are do ing and use common
sense when operating a power tool . Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriat e conditions will reduce persona l inju-
ries.
Prevent unintentional starting. E nsure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
Remove any adjusting key or wrench bef ore turning
the power tool on. A wrench or a k ey left attached to a ro-
tating part of the power tool may resul t in personal inju ry.
Do not overreach. Keep proper footing and balance at
all times. This enables better contr ol of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection of dust ex-
traction and collection facilities, ensu re these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power tool
for your application. The correct power to ol will do the
job better and safer a t the rate for which it was designed.
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repair ed.
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing acces sories, or storing power
tools. Such preventive safety measures redu ce the risk of
starting the power tool accidental ly.
Store idle power tools out of the reach of child ren and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untraine d users.
Maintain power tools. Check for misalignment or bind-
ing of movin g parts, break age of parts a nd any other
condition that may aff ect the power tool’s opera tion. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained
cutting to ols with sharp cutti ng edges are less likely to bind
and are easier to co ntrol.
Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous sit uation.
Service
Have your power tool s erviced by a qualified repair per-
son using only identical replacement parts. This wil l en-
sure that the safety of the power tool is maintained.
Hammer Safety Warnings
Wear ear protectors. Exposur e to noise can cause hear-
ing loss.
Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause per sonal injury.
Hold the tool by the insulated gripping surfaces when
performing operations where the application tool or
the screw could contact hidden wiring or its own power
cord. Contact with a “live” wire w ill also make exposed
metal parts of the power tool “live” and shock the operator.
Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Con tact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
When working with the machine, alwa ys hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more se cure with both hands.
Secure the workpiece. A wor kpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete
stop befor e placing it d own. The tool insert can jam and
lead to loss of control over the p ower tool.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved ele ctric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlet s, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed p lug must be dispo sed of to avo id a possible
shock hazard and should never be inserted into a mains sock-
et elsewhe re.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
OBJ_BUCH-318-007.boo k Page 15 Tuesday, November 10, 2015 5:05 PM
Sofia Weber
9 months ago
How quickly will my order arrive, and can I expect the device to work properly right after delivery?
Manual.ly
9 months ago
Most customers report fast shipping, and we provide tracking so you can follow the delivery progress. Delivery times depend on your location and carrier schedules, but you will receive a confirmation and tracking details as soon as the order ships. Regarding performance, the device is intended to work reliably from the start. If anything is not functioning as expected upon arrival, contact our support with your order number, and we will help troubleshoot or arrange a solution according to the warranty policy.