Manual.ly Logo

Bosch DIY EasyDrill 18V-40 Manual

0.0 · 0 Ratings

PDF manual · 213 Pages

English

M: gpt-5.6-terra
page

/ 213

Loading...
71c5894feb17472b4f4fdd1a130964f83f71 page d
English | 13
tion while operating power tools may result in serious per-
sonal injury.
u Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask,
non-skid safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce personal in-
juries.
u Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.
u Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal in-
jury.
u Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
u Dress properly. Do not wear loose clothing or jew-
ellery. Keep your hair and clothing away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
u If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
u Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe in-
jury within a fraction of a second.
Power tool use and care
u Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was de-
signed.
u Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
u Disconnect the plug from the power source and/or re-
move the battery pack, if detachable, from the power
tool before making any adjustments, changing ac-
cessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
u Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
u Maintain power tools and accessories. Check for mis-
alignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
u Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
u Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
u Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Battery tool use and care
u Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of bat-
tery pack may create a risk of fire when used with another
battery pack.
u Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
u When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
u Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the bat-
tery may cause irritation or burns.
u Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
u Do not expose a battery pack or tool to fire or excess-
ive temperature. Exposure to fire or temperature above
130°C may cause explosion.
u Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
Service
u Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
u Never service damaged battery packs. Service of bat-
tery packs should only be performed by the manufacturer
or authorized service providers.
Safety information for drills and screwdrivers
Safety instructions for all operations
u Wear ear protectors when impact drilling. Exposure to
noise can cause hearing loss.
Bosch Power Tools 1 609 92A 6MY | (14.09.2021)

Chat with your Bosch DIY EasyDrill 18V-40 manual using AI

Get instant AI answers from your Bosch DIY EasyDrill 18V-40 manual

Ask anything about the Bosch DIY EasyDrill 18V-40. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend EasyDrill 18V-40?

Yes No

Frequently Asked Questions

A

It is intended for drilling into wood, metal, ceramic, and plastic. The stated maximum drilling capacities are 30 mm in wood and 13 mm in steel. Use an appropriate drill bit for the material and begin at a lower speed for better control.

Is this answer helpful?

A

No. Impact drilling in brick is a function of the EasyImpact 18V-40 variant, not the EasyDrill 18V-40. For masonry work, choose a drill with an impact drilling mode and use a suitable masonry bit.

Is this answer helpful?

A

The drill driver has a maximum torque of 40 Nm. Its torque presetting ring provides 20 settings, allowing users to match fastening force to the screw size and material while reducing the risk of stripping screws or damaging surfaces.

Is this answer helpful?

A

Yes. The variable trigger allows gradual speed control, while the mechanical two-speed gearbox provides ranges of 0-430 rpm and 0-1,630 rpm. Low speed is useful for screwdriving, while higher speed suits smaller-diameter drilling.

Is this answer helpful?

A

It uses Bosch PBA 18V lithium-ion batteries and compatible AL 18 chargers. Battery capacity affects working time and tool weight. The battery should be fully charged before first use and removed before maintenance or storage.

Is this answer helpful?

A

Release the trigger so the spindle lock engages, then turn the 13 mm keyless chuck to open it. Insert the bit and hand-tighten the chuck firmly until it locks. Allow hot accessories to cool before handling them.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • 40 Nm maximum torque supports common drilling and screwdriving tasks.
  • Two-speed gearbox provides controlled low-speed work and faster drilling up to 1,630 rpm.
  • 20 torque settings help reduce overtightening and improve fastening control.
  • 13 mm keyless chuck enables quick, tool-free bit changes.
  • LED worklight and Auto-Lock spindle improve usability in low-light and manual tasks.
VS

Disadvantages

  • The EasyDrill model is not intended for impact drilling in masonry or brick.
  • Battery and charger availability may vary because accessories are not necessarily included.
  • Tool weight increases with higher-capacity batteries.
  • Performance is reduced when operating below 0 C.
  • It is designed for DIY applications rather than heavy-duty professional use.
M: gpt-5.6-terra

Product Specification

Type

Drill driver

No-load speed

0-430/0-1,630 rpm

Drilling capacity

Wood 1.18 in, steel 0.51 in

Screw diameter

0.31 in

Torque

16.96/23.6 ft-lb soft/hard, 21 settings (20+1)

Tool holder

0.51 in keyless chuck

Features

Forward/reverse rotation, speed control, multi-speed, torque preset, LED work light, soft grip, auto-lock

Weight

2.87 lb (including battery)

M: gpt-5.6-terra

Product Description

Bosch DIY EasyDrill 18V-40 Cordless Drill Driver - Read, Download & Print Free

The Bosch DIY EasyDrill 18V-40 Cordless Drill Driver is a practical 18V tool designed for everyday home improvement, assembly, repairs, and creative DIY projects. It combines cordless convenience with useful control features, making it suitable for driving screws and drilling into wood, metal, ceramic, and plastic. Its compact format helps users work comfortably in cabinets, on shelves, and in other tighter spaces.

Power and drilling capability

With a maximum torque of 40 Nm, the EasyDrill 18V-40 provides solid performance for typical household fastening work. A two-speed gearbox offers 0-430 rpm for controlled screwdriving and larger drilling tasks, plus 0-1,630 rpm for faster drilling with smaller bits. It supports drilling diameters of up to 30 mm in wood and 13 mm in steel, while accommodating screws up to 8 mm in diameter.

The 20-stage torque setting helps prevent overtightening when fitting furniture, mounting hardware, or working with softer materials. Select the drilling mode to disengage the torque clutch when full drilling power is needed. This balance of adjustable torque and variable trigger speed gives the operator more confidence when moving between delicate and demanding tasks.

Useful handling features

A 13 mm keyless chuck enables quick bit changes without a separate key. The drill also includes forward and reverse rotation for installing or removing screws, along with an integrated LED worklight to improve visibility in dim corners. Bosch Auto-Lock holds the spindle when the trigger is released, allowing bit changes with ease and enabling manual screwdriving if the battery is empty.

The tool weighs approximately 1.3 kg with a 1.5 Ah battery, although total weight varies by battery capacity. It is designed for use with Bosch PBA 18V batteries and compatible AL 18 chargers, providing access to the Bosch 18V DIY battery platform.

Notes

  • Fully charge the lithium-ion battery before first use.
  • Remove the battery before changing accessories, cleaning, transport, or storage.
  • Wear eye protection and keep the workpiece securely clamped.
  • Use suitable bits and select a low starting speed for accurate drilling.
  • Keep ventilation slots clean and avoid operating in wet or explosive environments.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly