Manual.ly Logo

Bosch DIY AdvancedGlue 18V Manual

5.0 · 2 Ratings

PDF manual · 183 Pages

English

M: OA-GPT-5-NAN
page

/ 183

Loading...
0d211fafd1b06961e4838d309abc64985ada page a
10 | English
u This glue gun can be used by chil-
dren aged 8 or older and by per-
sons who have physical, sensory
or mental limitations or a lack of
experience or knowledge if a per-
son responsible for their safety su-
pervises them or has instructed
them in the safe operation of the
glue gun and they understand the
associated dangers. Otherwise,
there is a risk of operating errors and
injuries.
u Supervise children. This will ensure
that children do not play with the
glue gun.
u Children must not be allowed to
clean and perform maintenance on
the glue gun without supervision.
u Always check the glue gun before using it. If damage
is detected, do not use the glue gun. Do not open the
glue gun yourself, and have it repaired only by a quali-
fied specialist using only original replacement parts.
Damaged glue guns increase the risk of an electric shock.
u Do not leave the glue gun unattended while it is
switched on.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
u Do not throw the glue stick into fire.
u Safely place the glue gun down after use and let it cool
completely before packing it away. The hot nozzle can
cause damage.
u Only charge the batteries using chargers recommen-
ded by the manufacturer. Doing otherwise poses a fire
hazard.
u Only use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
u When the battery is not in use, keep it away from pa-
per clips, coins, keys, nails, screws or other small
metal objects that could make a connection from one
terminal to another. A short circuit between the battery
terminals may cause burns or a fire.
u In case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
u If used incorrectly or if the battery is damaged, flam-
mable liquid may be ejected from the battery. Contact
with this liquid should be avoided. If contact accident-
ally occurs, rinse off with water. If the liquid comes
into contact with your eyes, seek additional medical
attention. Liquid ejected from the battery may cause ir-
ritation or burns.
u The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u Do not open the battery. There is a risk of short-circuit-
ing.
u Do not touch the nozzle while it is hot. There is a risk of
burns.
u Wear protective glasses while working overhead. This
will protect your eyes against any glue that drops down.
u Do not direct the glue gun at other persons or yourself
during operation. Hot adhesive may cause burns.
u Ensure that the temperature set is suitable for the
glue stick. If the temperature is too high, the adhesive
becomes liquid and may escape in an uncontrolled man-
ner. If the temperature is too low, the adhesive cannot
sufficiently bind with the material.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The glue gun is intended for solvent-free gluing of materials
such as paper, cardboard, cork, wood, leather, textiles,
foam materials, plastic (except PE, PP, PTFE, and plasticised
PVC), ceramics, porcelain, metal, glass and stone.
It is possible to glue heat-sensitive materials, such as Styro-
por
®
, when using special adhesives (low-melt) and a pro-
cessing temperature of 130°C.
The glue gun is suitable for sticking, repairing, decorating
and making models.
Product Features
The numbering of the product features refers to the illustra-
tion of the glue gun on the graphics page.
(1)
Nozzle
(2)
Heat shield
(3)
Glue stick
a)
(4)
Glue stick compartment
(5)
Battery release button
a)
(6)
Rechargeable battery
a)
1 609 92A 85W | (08.08.2022) Bosch Power Tools

Chat with your Bosch DIY AdvancedGlue 18V manual using AI

Get instant AI answers from your Bosch DIY AdvancedGlue 18V manual

Ask anything about the Bosch DIY AdvancedGlue 18V. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend AdvancedGlue 18V?

Yes No
0
User Pic

Josefina Schuppe

7 months ago

Does this hot glue gun work really well cordless for home projects, like sealing or gluing parts around the house without needing a power cable?

0
User Pic

Manual.ly

7 months ago

Yes. The glue gun is battery-powered, so you can move freely and apply glue wherever you need it, for example to seal containers, bond parts around the room, or take it outside for quick repairs. It heats up quickly and offers two temperature settings to match different materials. The tool also feels comfortable in the hand and has a stable way to set it down while cooling. If you are using the same Bosch battery platform, the included battery (and the optional free battery promotion when applicable) makes it easy to keep working without dragging a cable.

M: OA-GPT-54-NAN
M: OA-GPT-54-NAN

Frequently Asked Questions

A

The glue gun provides two selectable processing temperatures: 130°C for heat-sensitive materials (used with low-melt glue sticks) and 200°C for standard applications like paper, wood, ceramics, metal and glass.

Is this answer helpful?

A

Use Bosch-recommended 11 mm diameter glue sticks (45–200 mm length) and original Bosch nozzles (part 1600A02EU3). Using specified consumables ensures proper feed, melting properties and avoids performance issues.

Is this answer helpful?

A

Heat-up time is approximately 2 minutes. Operating time per battery charge depends on the PBA battery used; measured at 20–25°C with a PBA 18V 2.5Ah it can process up to about 10 glue sticks under the test conditions.

Is this answer helpful?

A

Supervise children, wear protective eyewear for overhead work, avoid contact with the hot nozzle and molten glue (~200°C), keep batteries away from heat and metal objects, and only charge with Bosch-recommended chargers. Let the nozzle cool fully before storage.

Is this answer helpful?

A

Common causes include using glue sticks with incorrect melting points or diameters, wrong temperature setting, or uneven trigger feed. Use recommended glue sticks, set the correct processing temperature, and press the feed trigger smoothly.

Is this answer helpful?

A

Yes, when you use low-melt (special) glue sticks and set the gun to 130°C. Test on a scrap piece first to ensure the material tolerates the heat and the chosen adhesive.

Is this answer helpful?

A

Switch off and cool the gun before maintenance. Remove hardened glue with a blunt tool; do not use flammable solvents. Do not pull a glue stick out from the rear to avoid damage. Replace or service only with qualified personnel and original parts.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Two selectable temperatures (130°C and 200°C) for delicate or strong bonds.
  • Cordless 18V operation with quick heat-up (~2 minutes) for portable use.
  • Compatible with standard 11 mm glue sticks (45–200 mm) and Bosch PBA batteries.
  • Battery charge indicator and auto-off after 10 minutes to save energy.
  • Detailed troubleshooting and safety guidance included for reliable operation.
VS

Disadvantages

  • Requires Bosch-recommended glue sticks and original nozzles for best performance.
  • Battery sold separately; runtime varies by battery capacity and use.
  • Nozzle can reach ~200°C — burn risk; requires careful handling and gloves for changes.
  • Cooling from 200°C to 130°C can take several minutes, slowing temperature changes.
  • Not suitable for PE, PP, PTFE and soft PVC; some materials need special adhesives.
M: OA-GPT-5-NAN

Product Specification

Battery

18V, Li-Ion

Temperature

266/392°F, 2 Levels

Heat-up time

90s

Glue stick diameter

0.43 in

Weight

1.54 lb

Scope of delivery

without charger and battery

M: OA-GPT-54-NAN

Product Description

Bosch DIY AdvancedGlue 18V Cordless Hot Glue Gun solo Manual

The Bosch DIY AdvancedGlue 18V cordless hot glue gun is a compact, battery-powered tool designed for quick, solvent-free bonding across a wide range of materials. With selectable temperatures (130°C and 200°C), it supports delicate jobs—using low-melt sticks for heat-sensitive substrates like polystyrene—and stronger bonds for paper, wood, textiles, ceramics, metal, glass and stone. The tool accepts 11 mm diameter glue sticks (45–200 mm length) and offers up to approximately 10 sticks per battery charge (depending on the PBA battery used), making it suitable for home DIY, crafts, repair and decoration tasks.

The gun features a heat-protected nozzle, a trigger feed, an on/off button and two temperature selection buttons. LED indicators show heating progress and battery charge status; if a temperature LED flashes red after heating, the battery is below 30% and should be recharged. It heats quickly (approx. 2 minutes) and is intended to be used with Bosch-recommended glue sticks and original Bosch nozzles for reliable performance.

Design and usability emphasize safety and practicality: a detachable rechargeable battery, a battery release button, and guidance to store and handle the battery safely (protect from moisture, heat and conductive objects). The tool automatically switches off after 10 minutes of idle time to conserve energy. Changing the nozzle requires warming the gun and using protective gloves, and replacement nozzles must be Bosch originals. The manual outlines prep and application best practices—clean, dry, grease-free surfaces; preheating large or cooling materials; applying adhesive as dots for large areas or lines for flexible materials—and recommends pressing parts together for about 30 seconds with full bond strength after roughly 5 minutes.

Comprehensive troubleshooting and maintenance guidance covers common problems (drips, feed issues, uneven flow), causes and corrective measures: use recommended glue sticks, set correct temperature, keep feed smooth, and clean without flammable solvents. Safety instructions stress supervision for children, protective eyewear for overhead work, avoiding contact with the hot nozzle and molten adhesive, and correct disposal and recycling of the gun and batteries according to local regulations.

For transport and service the manual notes lithium-ion battery handling rules, charger compatibility, and Bosch after-sales support channels for spare parts and repairs. The AdvancedGlue 18V balances portability, two-temperature versatility and Bosch build quality for DIYers seeking a reliable cordless hot-melt solution.

Notes

  • Use only Bosch-recommended glue sticks and original nozzles.
  • Select 130°C for heat-sensitive materials and 200°C for standard bonds.
  • Let the nozzle cool fully before storage and avoid solvents when cleaning.
  • Observe battery charging and transport guidelines to prevent hazards.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly