Manual.ly Logo

Bosch DIY AdvancedAquatak 150 Manual

0.0 · 0 Ratings

PDF manual · 280 Pages

English

M: OA-GPT-54-NAN
page

/ 280

Loading...
ac2ca9c277900f9410a83f987316ada58a53 page 9
Deutsch | 9
Bosch Power Tools F 016 L81 291 | (27.7.16)
Tauchen Sie den 3 m Schlauch vollständig unter Wasser, um
die Luft zu verdrängen. Schließen Sie den 3 m-Saugschlauch
an den Hochdruckreiniger an und stellen Sie sicher, dass das
Ansaugsieb unter Wasser bleibt.
Lassen Sie den Hochdruckreiniger mit abgenommener
Sprühpistole laufen, bis Wasser gleichmäßig aus dem Hoch-
druckschlauch fließt. Wenn nach 25 Sekunden noch kein
Wasser austritt, schalten Sie aus und prüfen Sie alle Anschlüs-
se. Wenn Wasser fließt, den Hochdruckreiniger ausschalten
und zum Arbeiten die Sprühpistole und die Sprühlanze an-
schließen.
Es ist wichtig, dass Schlauch und Kupplungen von guter Qua-
lität sind, dicht verbunden und die Dichtungen unbeschädigt
und gerade eingelegt sind. Undichte Anschlüsse können das
Ansaugen behindern.
Wasserbehälter mit Entleerhahn
Wenn der Hochdruckreiniger an einen Tank mit einem pas-
senden Entleerhahn angeschlossen werden soll, muss zuerst
ein Wasserschlauch (nicht mitgeliefert) am Hahn angeschlos-
sen werden. Öffnen Sie den Hahn, um alle Luft aus dem
Schlauch zu verdrängen und schließen Sie ihn dann an den
Hochdruckreiniger an.
Fehlersuche
Symptome Mögliche Ursache Abhilfe
Motor läuft nicht an Stecker nicht angeschlossen Stecker anschließen
Steckdose defekt Andere Steckdose benutzen
Sicherung hat ausgelöst Sicherung wechseln
Verlängerungskabel beschädigt Ohne Verlängerungskabel versuchen
Motorschutz hat angesprochen Den Motor 15 min abkühlen lassen
Eingefroren Pumpe, Wasserschlauch oder Zubehör auftauen
lassen
Motor bleibt stehen Sicherung hat ausgelöst Sicherung austauschen
Netzspannung nicht richtig Netzspannung prüfen, muss der Angabe auf dem Ty-
penschild entsprechen
Motorschutz hat angesprochen Den Motor 15 min abkühlen lassen
Sicherung löst aus Sicherung zu schwach An einen Stromkreis anschließen, der passend zur
Leistung des Hochdruckreinigers abgesichert ist
Der Motor läuft, aber kein Druck
vorhanden
Düse teilweise verstopft Düse reinigen
Motorgeräusch vorhanden aber
keine Funktion
Unzureichende Netzspannung Prüfen Sie, ob die Spannung des Stromnetzes den
Angaben auf dem Typenschild entspricht.
Zu niedrige Spannung wegen Ver-
wendung eines Verlängerungskabels
Prüfen Sie, ob das Verlängerungskabel geeignet ist
Gerät wurde lange Zeit nicht benutzt Wenden Sie sich an den autorisierten Bosch Kun-
dendienst
Probleme mit der Autostop-Funktion Wenden Sie sich an den autorisierten Bosch Kun-
dendienst
Pulsierender Druck Luft im Wasserschlauch oder Pumpe Hochdruckreiniger mit offener Sprühpistole, offe-
nem Wasserhahn und bei auf Niederdruck einge-
stellter Düse laufen lassen, bis ein gleichmäßiger Ar-
beitsdruck erreicht wird
Wasserversorgung nicht korrekt Prüfen, ob der Wasseranschluss den Angaben in
den technischen Daten entspricht. Die kleinsten
Wasserschläuche die verwendet werden dürfen,
sind 1/2" oder Ø 13 mm
Wasserfilter verstopft Wasserfilter reinigen
Wasserschlauch gequetscht oder ge-
knickt
Wasserschlauch gerade auslegen
Hochdruckschlauch zu lang Hochdruckschlauch-Verlängerung abnehmen, max.
Wasserschlauchlänge 7 m
OBJ_BUCH-2737-001.book Page 9 Wednesday, July 27, 2016 11:15 AM

Chat with your Bosch DIY AdvancedAquatak 150 manual using AI

Get instant AI answers from your Bosch DIY AdvancedAquatak 150 manual

Ask anything about the Bosch DIY AdvancedAquatak 150. Answers come from this manual, with the pages they are based on.

AdvancedAquatak 150 Maintenance Schedule

Remind me when maintenance is due
Monthly
Clean the water filter

Regularly check and clean the inlet filter to ensure proper operation and prevent damage.

Yearly
Inspect for defects

Check regularly for loose fixings, worn parts, damaged covers, or guards before use.

Show in the manual (page 10)
Yearly
Replace nozzles if worn

If pressure is low but steady, replace the nozzle as it may be worn out.

After each use
Drain the high-pressure hose

Turn off the switch and operate the trigger to drain all water from the hose after every use.

Show in the manual (page 10)
After each use
Clean the exterior

Clean the outside of the unit with a soft brush and cloth. Do not use water or solvents.

Show in the manual (page 10)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend AdvancedAquatak 150?

Yes No

Frequently Asked Questions

A

It is suitable for outdoor surfaces, tools, vehicles, boats, patios, and garden furniture when used with the right accessories and cleaning agents.

Is this answer helpful?

A

Yes. The motor stops automatically when you release the trigger, which helps save energy and reduces wear during short pauses.

Is this answer helpful?

A

Yes. It has self-priming capability, so it can take water from tanks or natural sources as long as the water is clean and the filter is fitted.

Is this answer helpful?

A

Use only detergents that are suitable for pressure washers and follow the dilution instructions. Bosch-approved cleaners are the safest choice for best results.

Is this answer helpful?

A

Drain the water, clean the exterior, keep the hose unkinked, and store the unit in a frost-free area. Do not place objects on top of it.

Is this answer helpful?

A

Yes, but only from a minimum distance of 30 cm. Cleaning too close can damage the tire or valve, so extra care is important.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Strong cleaning performance with up to 15 MPa allowable pressure and a solid 2.2 kW motor.
  • Self-priming design lets it draw water from tanks or other alternative sources.
  • Auto-stop helps reduce energy use and pump wear when the trigger is released.
  • Accessory support adds versatility for patios, detergents, and variable spray patterns.
VS

Disadvantages

  • Not intended for commercial or industrial cleaning jobs.
  • Needs careful setup and upkeep, including clean filters and proper hose connections.
  • Weighs 21.1 kg, so moving it around can be less convenient.
  • Requires caution on tires, seals, and sensitive surfaces because of the high-pressure spray.
M: OA-GPT-54-NAN

Product Specification

Operating mode

Cold water

Power

2200W

Pressure

2175.57psi

Flow rate

max. 126.80gal/h

Inlet temperature

max. 104°F

Mobility

Trolley

Fuel tank

no

Weight

46.52lbs

Scope of delivery

High-pressure gun, High-pressure hose (8m), 3x Lance/Spray lance, Nozzle (Jet-Fan), Hose reel, Accessory holder, Hose, Water filter

M: OA-GPT-54-NAN

Product Description

Bosch DIY AdvancedAquatak 150 Electric Pressure Washer

Built for fast, practical cleaning

The Bosch DIY AdvancedAquatak 150 is designed for home users who want serious cleaning power without a complicated setup. With a strong 2.2 kW motor, a rated pressure of 11 MPa, and a maximum allowable pressure of 15 MPa, it is ready to handle patios, garden furniture, bicycles, tools, cars, and boats. The washer is also self-priming, so it can draw water from tanks or natural sources when needed, which adds flexibility for places where a direct tap connection is not always available.

Flexible cleaning with the right accessories

A major strength of this model is its support for different nozzles and attachments. The variable fan lance gives you controlled spray coverage for everyday dirt, while the roto lance adds extra power for stubborn grime. A detergent bottle helps apply cleaning solution in a measured way, and the patio cleaner accessory is useful for flat outdoor surfaces. Combined with Bosch-approved cleaning agents, the system makes it easier to move from heavy dirt removal to a cleaner final rinse.

Safety and ease of use

The machine includes practical safety features such as an auto-stop function, which switches off the motor when you release the trigger. That helps save energy and reduces wear during short pauses. The handle and hose setup are made for two-handed control, and the guidance emphasizes stable footing, clean water supply, and careful use around vehicles, tires, and electrical parts. For anyone looking up the Bosch DIY AdvancedAquatak 150 Electric Pressure Washer Manual, the setup is straightforward: connect the hose, bleed the air, unlock the trigger, and begin washing.

Care, storage, and long-term performance

Regular maintenance matters with a pressure washer like this. The inlet filter should stay clean, the nozzle should not be blocked, and the high-pressure hose should be protected from kinks and sharp edges. After use, the machine should be drained, wiped down, and stored in a frost-free place. It is a homeowner-friendly washer, but it rewards disciplined care. Keep detergents diluted, avoid solvents and acids, and never run the unit dry.

Why it stands out

What makes the AdvancedAquatak 150 appealing is the balance between power and control. It offers enough strength for seasonal deep cleans, yet remains simple enough for routine washing. If you want a dependable pressure washer that feels robust, versatile, and easy to fit into a DIY cleaning routine, this Bosch model is a strong pick. With the right accessories and maintenance habits, it can become a reliable part of your toolkit for years.

Notes

  • Best for domestic outdoor cleaning, not commercial use.
  • Use only clean or filtered water.
  • Keep a safe distance from tires and delicate surfaces.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly