Blome Amrum Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Blome Amrum manual using AI
Get instant AI answers from your Blome Amrum manual
Ask anything about the Blome Amrum. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Amrum?
Yes NoFrequently Asked Questions
The package typically contains two side parts, one middle part (except Ibiza variant), one backrest, one seat panel, a set of screws and washers, and a set of end caps. Model-specific differences such as omission of the middle bracket apply to the Ibiza version.
Is this answer helpful?
Assembly is designed to be straightforward and can be completed by one person. Steps include positioning the feet on a level surface, loosely fastening the seat, fitting the middle bracket if included, attaching the backrest, and finally tightening all screws and adding caps. Working on a soft surface is recommended to avoid scratches.
Is this answer helpful?
Basic hand tools are sufficient: a wrench or spanner for nuts and bolts, screwdrivers as needed, and a rubber mallet to tap in end caps. Washers and nuts are provided; no specialized machinery is required.
Is this answer helpful?
Maintenance is minimal: regularly clean dirt and debris, inspect and retighten fasteners periodically, and replace any worn plastic caps or end caps. The wood-look material reduces the need for sealing or staining compared with natural timber.
Is this answer helpful?
Yes, the bench is designed for outdoor use and durable weather-resistant materials. However, prolonged exposure to extreme conditions may accelerate wear on plastic caps and fasteners—periodic checks and sheltering in severe weather will extend its lifespan.
Is this answer helpful?
Contact the manufacturer or reseller with the bench model and parts list. Blome-Tillmann provides customer support; keep proof of purchase and note which components (e.g., middle bracket, screws, end caps) are missing or damaged for prompt replacement.
Is this answer helpful?
Yes, replacement plastic screw covers and end caps are commonly available through the manufacturer or spare-parts suppliers. Retaining small extras at purchase or ordering direct from the producer simplifies future maintenance.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Wood-look finish offers natural appearance with low maintenance.
- Made in Germany: precise components and consistent manufacturing quality.
- Straightforward assembly with clear step sequence and common tools.
- Durable materials and protected fastenings ensure long service life.
- Includes plastic caps and end caps for a neat, finished look.
Disadvantages
- Middle bracket omitted for Ibiza variant, reducing support for that model.
- Requires periodic fastener checks to maintain stability over time.
- End caps and plastic covers may degrade and require replacement.
- Assembly on hard surfaces risks scratches—soft surface recommended.
- Limited to two seats, not suitable for larger groups or lounging.
Product Specification
Color
brown
Frame
Plastic
Seat and backrest
Plastic
Load capacity
max. 352.74 lb
Special features
weather-resistant, UV-resistant
Dimensions (LxWxH)
47.24x25.20x31.50in
Product Description
Blome Amrum 2-seater garden bench wood look Manual
The Blome Amrum 2-seater garden bench wood look combines classic aesthetics with practical engineering to offer an inviting outdoor seating solution. Crafted with a wood-look finish and manufactured in Germany, this two-seater bench blends weather-resistant materials with carefully shaped components to deliver durability, comfort, and visual charm for patios, gardens, or balconies.
Assembly is straightforward and suited to DIY enthusiasts: position the bench feet on a level surface, place the seat onto the feet and loosely fasten screws from above, then install the center bracket (excluded on Ibiza variant) and lightly tighten fasteners. Attach the backrest beginning at the center bracket, then fully tighten all nuts and bolts. Finish by inserting plastic screw covers and tapping in end caps with a rubber mallet to protect slats and hardware.
Key product elements include two side parts, one middle part (except Ibiza), one backrest, one seat panel, a set of screws, and end caps. The bench’s components are precision-made and selected to provide long-term service. Assembly instructions emphasize working on a soft surface to avoid scratches, starting fastening from the front, and using washers and nuts to secure the seat before final tightening.
Maintenance is simple: keep the bench clean, check and retighten fasteners periodically, and replace damaged plastic caps or end caps as needed. The wood-look finish offers the warmth of natural timber with the low-maintenance benefits of modern materials—ideal for users who want the appearance of wood without frequent sealing or staining.
Whether used for quiet morning coffee, shared conversations, or as a decorative focal point in an outdoor setting, the Blome Amrum bench is designed for comfort and reliable function. Its German production and attention to material choice and assembly tolerances make it a dependable choice for homeowners seeking a balance of style and longevity.
Notes
- Assembly on soft ground (carpet or grass) helps avoid scratches.
- The middle bracket is not included for the Ibiza model—follow model-specific instructions.
- Use a rubber mallet to seat end caps cleanly without damage.
- Keep spare caps and fasteners for future maintenance or replacements.
Search for 67,706 Manuals online
Type-in Brand or Model