Manual.ly Logo

Blackburn Chamber HV Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: OA-GPT-5-NAN
page

/ 1

Loading...
2835c96da133399a5e7793e44f376d433b2b page 1
CHAMBER HV
™
Floor pump
Part# 7074794
WARNING: NEVER OVERINFLATE YOUR TIRE. SEE TIRE SIDEWALL FOR MANUFACTURER RECOMMENDED TIRE INFLATION PSI.
Visit us at blackburndesign.com for product updates.
INSTRUCTIONS FOR TIRE INFLATION
1. Remove the dust cap from your tire valve. If you have Presta
valves,unscrew the metal locking barrel at the tip of the valve.
2. Push in the tip of either valve type to ensure that the valve isn’t
stuck and to blow out any dirt.
3. Choose the correct pump head insert for your valve type (FIGURE 1).
If necessary, unscrew cap and reverse rubber insert.
4. Press pump head onto valve and lift the lever to lock.
5. Inflate to desired air pressure. DO NOT OVERINFLATE TIRE.
6. If necessary depress the air bleed valve on the pump head to
release air until the desired pressure is achieved.
7. Press pump head lever down and remove.
8. If using Presta valves, screw the locking barrel until tight.
9. Replace the tire valve dust cap.
ANYVALVE PUMP HEAD WITH AIR BLEED BUTTON
FIGURE 1
SHORT PRESTA/
DUNLOP
LONG PRESTA/
SCHRADER
Air bleed
Purge air
Entlüftungstaste
>20mm LONG
PRESTA
<20mm SHORT
PRESTA
Supersized 4" gauge
31.8mm stem clamp
Integrated bottle opener
Wide aluminum
knurled handle
Steel base and barrel
Anyvalve™ pump head
Air bleed button

Chat with your Blackburn Chamber HV manual using AI

Get instant AI answers from your Blackburn Chamber HV manual

Ask anything about the Blackburn Chamber HV. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Chamber HV?

Yes No

Video Manual

The Best Bike Pumps: Schrader and Presta Valve Pumps PUT TO THE TEST!

Frequently Asked Questions

A

The Chamber HV uses Blackburn’s Anyvalve head which supports Presta, Schrader and Dunlop valves. A reversible rubber insert and lever lock allow secure connection to short and long Presta stems without changing heads.

Is this answer helpful?

A

Always check the tire sidewall for the manufacturer’s recommended PSI. Inflate to the target and use the pump’s air bleed button to release small amounts of air until you reach the desired pressure.

Is this answer helpful?

A

The pump features an oversized 4-inch analog gauge designed for easy reading at a glance. While accurate for typical use, extremely precise measurements may still benefit from a high-precision digital gauge.

Is this answer helpful?

A

The Chamber HV employs a steel barrel and base for strength, a wide knurled aluminum handle for grip and longevity, and a stable 31.8mm stem clamp to reduce wobble—combining robust materials for regular shop or home use.

Is this answer helpful?

A

Yes. The Anyvalve head includes a reversible insert and clear markings for short (<20mm) and long (>20mm) Presta valves, enabling proper sealing and inflation for both lengths.

Is this answer helpful?

A

In addition to the gauge and Anyvalve head, the Chamber HV includes an integrated bottle opener and an oversized gauge for convenience, though these are supplementary to its core pumping performance.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Anyvalve head fits Presta, Schrader and Dunlop without swapping parts.
  • Oversized 4" gauge offers clear, easy-to-read pressure measurements.
  • Air bleed button allows precise pressure adjustments to avoid overinflation.
  • Robust steel barrel and wide knurled aluminum handle for durability and comfortable pumping.
  • Stable base and 31.8mm stem clamp reduce wobble during use.
VS

Disadvantages

  • Larger high-volume design may be bulkier than compact travel pumps.
  • Steel barrel and metal components add weight compared to alloy- or composite-focused pumps.
  • Integrated features like bottle opener are convenience items, not performance-critical.
  • Requires correct insertion/reversal of rubber insert for certain valve lengths.
  • Mechanical gauge may lack the precision of some digital pressure meters.
M: OA-GPT-5-NAN

Product Specification

Type

Floor pump

Colors

black, green, orange

Valve

Schrader\/car valve, Dunlop\/Woods valve, Sclaverand\/Presta

Pressure

44 psi / 43.51 psi

Dimensions

27.95x11.81x7.09in

Features

Pressure gauge

M: OA-GPT-54-NAN

Product Description

Blackburn Chamber HV Standpumpe Manual

The Blackburn Chamber HV Standpumpe is a high-volume floor pump engineered for fast, reliable inflation of large-volume tires commonly found on mountain bikes and gravel rigs. Designed with a robust steel barrel and a wide aluminum knurled handle, this pump puts comfort and control first—letting you deliver air quickly without excessive effort. An oversized 4" gauge provides clear, easy-to-read pressure readings so you can hit the target PSI with confidence.

Featuring Blackburn’s Anyvalve pump head, the Chamber HV accommodates Presta, Schrader and Dunlop valves without swapping parts. The reversible rubber insert and simple lever lock let you connect securely to short or long Presta stems. An integrated air-bleed button lets you fine-tune pressure in small increments to avoid overinflation, while the large base and 31.8mm stem clamp provide stability during pumping.

The Chamber HV is built for durability and day-to-day use. Its steel base and barrel resist wear from repeated use, and the knurled aluminum handle ensures a non-slip grip even when your hands are sweaty or muddy. A useful integrated bottle opener is a small but appreciated detail for post-ride celebrations. Overall, the pump balances speed, precision and rugged construction for riders who want a dependable shop-style pump at home or on the trail.

Whether you’re topping off a high-volume tire quickly or dialing in exact pressures for trail performance, the Blackburn Chamber HV Standpumpe makes inflation simple. Its clear gauge, Anyvalve head with air bleed, and thoughtful ergonomics help you get accurate results fast. Use the pump’s bleed feature to release small amounts of air when you’re close to the target PSI and always check your tire sidewall for the manufacturer’s recommended inflation range.

Notes:

  • Always check the tire sidewall for max PSI to avoid overinflation.
  • Use the air bleed button to fine-tune pressure in small steps.
  • Ensure the pump head is fully locked before inflating to prevent leaks.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly