Manual.ly Logo

Biohort StoreMax 190 Manual

0.0 · 0 Ratings

PDF manual · 16 Pages

English

M: OA-GPT-54-NAN
page

/ 16

Loading...
ffc2f731fbeab3053f7a126ce2e43bf95ff5 page 7
7
Vorne links
front side left
avant gauche
Vorne rechts
front side right
avant droit
hinten
rear
l’envers
hinten
rear
l’envers
EinbaudesVersteifungsprofils/Einbauder
Distanzstücke: Nehmen Sie wie abgebildet das
Versteifungsprofil, führen Sie es vorsichtig in die
Box ein und verschrauben Sie es links und rechts an den
Enden (siehe Pfeile) handfest nur mit je einer Schraube/
Scheibe/Mutter an den Seitenwänden.
Nun schwenken Sie das Versteifungsprofil rückwärts und
nach oben und verschrauben Sie es zuerst links und rechts
hinten mit der Rückwand mit je einer Schraube/Scheibe/
Mutter. Damit ist das Versteifungsprofil vorläufig gesichert.
Nun verschrauben Sie das Versteifungsprofil mit den Sei-
tenwänden und mit der Rückwand an allen übrigen Stellen
(siehe Pfeile – insgesamt 12 mal). Jetzt entfernen Sie im lin-
ken und rechten Eck die schwarzen Montagehilfen, welche
nun ihre eigentliche Verwendung als Distanz stücke be-
kommen. Dazu legen Sie diese schwarzen Kunststoffteile
(Distanzstücke) links und rechts unten wie abgebildet
zwischen Bodenplatte und Rückwand bei den langen Niro-
Schrauben ein.
Nun kann die Verschraubung der linken und rechten Alu-
profile auf der Rückseite mit der Bodenplatte fest angezo-
gen werden.
Mounting of stiffener section and distance pieces: Take the stiffener
section and carefully insert it into the box. Fix it on the left and right sides
(see arrows) with one screw, washer, and nut each at the side walls. Then,
move the stiffener section backwards on top and fix it left and right to the
rear wall using one screw, washer, and nut each. The stiffener section is
now provisionally secured. Next, secure the stiffener section with the side
walls and the rear wall (see arrows – totally 12 times).
Please remove the black plastic parts from the left and right corner. They
will now be used – as originally intended – as distance pieces.
Insert the plastic parts as illustrated left and right between bottom plate
and rear wall at the long stainless steel metal screws. You can now finally
connect the left and right aluminium profiles to the bottom plate and secure
the screws.
3.
GB

Chat with your Biohort StoreMax 190 manual using AI

Get instant AI answers from your Biohort StoreMax 190 manual

Ask anything about the Biohort StoreMax 190. Answers come from this manual, with the pages they are based on.

StoreMax 190 Maintenance Schedule

Remind me when maintenance is due
Yearly
Lubricate the lock

Oil the cylinder lock at least once a year with a thin, liquid oil.

Yearly
Clean shutter guides

Clean the shutter guides on the left and right sidewall with a cloth at least once per year to ensure smooth operation.

Show in the manual (page 13)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend StoreMax 190?

Yes No

Frequently Asked Questions

A

It is best used for compact outdoor storage such as garden tools, cushions, and small accessories. Its roller-shutter design makes it ideal for tight spaces where a swinging door would be less practical.

Is this answer helpful?

A

Yes. The box should be anchored securely with the included screws and dowels. Proper anchoring is important to reduce the risk of wind damage and keep the unit stable on its base.

Is this answer helpful?

A

The instructions recommend two people for assembly. That makes handling large panels easier, improves alignment, and helps ensure the box is built correctly on a level surface.

Is this answer helpful?

A

The shutter guides should be cleaned regularly, and the lock should be oiled at least once a year. Mild cleaners and water are recommended to avoid damaging the surfaces.

Is this answer helpful?

A

Avoid assembling the box on windy days and do not tighten all nuts too early. It is also important to wear work gloves because some metal edges may be sharp.

Is this answer helpful?

A

It uses a reinforced body and a roller-shutter system instead of a conventional hinged lid or door. That gives it a compact shape, smooth access, and a more refined outdoor-storage look.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Compact footprint with surprisingly efficient storage for garden and patio essentials.
  • Roller-shutter access saves space and makes daily use convenient.
  • Reinforced structure and anchoring support improve stability in windy conditions.
  • Clear maintenance routine helps keep the box functional for years.
VS

Disadvantages

  • Assembly is detailed and requires patience, tools, and a second person.
  • Should not be assembled in windy weather, which can delay installation.
  • Many small parts and screws make the build process more complex.
  • Regular cleaning and lubrication are needed to maintain smooth operation.
M: OA-GPT-54-NAN

Product Specification

Material

Sheet steel

Opening

Lid with spring-loaded system

Volume

317.01 gal

Special features

weatherproof, weather resistant, UV resistant, lockable

Dimensions (LxWxH)

64.17x30.71x47.24in

Weight

132.28 lbs

M: OA-GPT-54-NAN

Product Description

Biohort StoreMax 190 Garden Box

The Biohort StoreMax 190 garden box is designed for people who want compact outdoor storage without sacrificing ease of use or a clean look. Built around a clever roller-shutter concept, it offers quick access to tools, cushions, small garden accessories, and other items that need protection from the elements. If you are searching for a practical solution and also looking up the Biohort Storemax 190 garden box Manual, this product stands out for its structured assembly process and long-term usability.

What makes the StoreMax 190 appealing is its focus on efficient space management. The box uses a reinforced structure, durable metal panels, and a rolling shutter system that helps maximize storage in a small footprint. That makes it a strong fit for patios, gardens, garages, and terraces where space is limited but organization matters. The front and top shutter sections are designed for smooth movement, while the locking system adds a reassuring sense of security.

Assembly is clearly planned and methodical, but it is not a rushed one-person job. The instructions emphasize working on level ground, using gloves, and assembling in calm weather. Several parts must be aligned carefully, including the base plate, rear panels, side walls, stiffening section, guide pulley, and locking pins. This approach reflects the box’s solid construction: once assembled correctly, it is meant to stay stable and perform well over time.

Maintenance is straightforward and practical. The lock should be oiled once a year, the shutter guides should be cleaned regularly, and the moving parts should remain free of dirt and harsh chemicals. Biohort clearly focuses on durability, and that shows in the maintenance advice: simple care helps preserve smooth function and keep the shutter system reliable season after season.

For homeowners who value tidy storage, thoughtful engineering, and a premium outdoor finish, the StoreMax 190 is a smart choice. It combines compact design with secure access and a durable build, making it more than just a storage box—it is a small organizational upgrade for outdoor living.

Notes

  • Best assembled by two people on a flat surface.
  • Anchor securely to protect against strong wind.
  • Use mild cleaners only; avoid abrasive products.
  • Clean shutter guides and lubricate the lock yearly.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly