Manual.ly Logo

beyerdynamic Xelento wireless 2nd Generation Manual

0.0 · 0 Ratings

PDF manual · 236 Pages

English

M: gpt-5.6-terra
page

/ 236

Loading...
b1b5c41c71d8b7f64c4da461b801c206ca7d page 7
7/30Safety inructions
English
Thank you for choosing Xelento wireless (2nd generation) in-ear headphones.
SAFETY INSTRUCTIONS
► Please read these inructions carefully and completely before using the product.
► Please observe all inructions given, especially those concerning the safe use of the
product.
► Do not use the product if it is defective.
► The company beyerdynamic GmbH & Co. KG accepts no liability for damage to the
product or injury to persons caused by careless, improper or incorrect use of the
product, or by use for purposes not specified by the manufacturer.
Intended use
Only use the product as described in this product manual. beyerdynamic accepts no
liability for damage to the product or injury to persons caused by careless, improper or
incorrect use of the product, or by use for purposes not specified by the manufacturer.
beyerdynamic is not liable for damage to USB devices that do not comply with the USB
specifications.
beyerdynamic is not liable for damage resulting from connection interruptions due to
batteries being empty or too old, or due to exceeding the Bluetooth® transmission range.
Please also observe the relevant country-specific regulations before using the product.
Adjuing the volume
High volumes and long liening times can permanently damage your hearing.
Because in-ear headphones sit directly in the ear canal, there is an increased
risk of hearing damage.
► Before inseing the earphones, set the volume to minimum. Only increase the volume
aer inseing the earphones.
► Do not use the in-ear headphones at high volume for a long time. When liening and
speaking normally with in-ear headphones, your own voice should ill be perceptible.
► In case of tinnitus, decrease the volume. If necessary, consult a doctor.
► Please note that excessively high volumes and long liening times may cause hearing
damage. Hearing impairments are irreversible, so always make sure that the volume is
appropriate. It is advisable to keep liening times at high volumes as sho as possi-
ble.
► The headphones are not suitable for children under 12 years of age due to the possible
high sound pressure level.
► Do not use the headphones at full volume for more than three hours a week.
You can use the beyerdynamic MIY App to personalise the Bluetooth® headphones. The
app’s “Statiics” function records the sound pressure level your ears are exposed to over
time. However, it only refers to the sound pressure level generated through the head-
phones’ speakers and not to that from external sources of noise.

Chat with your beyerdynamic Xelento wireless 2nd Generation manual using AI

Get instant AI answers from your beyerdynamic Xelento wireless 2nd Generation manual

Ask anything about the beyerdynamic Xelento wireless 2nd Generation. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Xelento wireless 2nd Generation?

Yes No

Frequently Asked Questions

A

The set includes left and right Xelento earphones, a Bluetooth receiver, a 3.5 mm remote cable, a USB-A to USB-C charging cable, seven silicone tip pairs, three Comply foam tip pairs, cable clips, a storage case, a spare wax guard, and a microfiber cloth.

Is this answer helpful?

A

It supports LHDC, aptX HD, aptX Adaptive, aptX, AAC, and SBC through A2DP. The actual codec used depends on the capabilities of the connected source device. When available, LHDC is prioritized for audio transmission.

Is this answer helpful?

A

Yes. It can be paired with up to eight Bluetooth devices and keep up to two active connections at once using multipoint. Music and calls operate with one device at a time, and phone calls take priority over music playback.

Is this answer helpful?

A

With the receiver switched off, press and hold the power button for six seconds. The status LED flashes blue and red alternately. Then select "Xelento wireless (2nd gen.)" in the Bluetooth menu of your phone or other playback device.

Is this answer helpful?

A

Yes. The included 3.5 mm four-pole cable connects the earphones directly to compatible devices. Its inline remote provides playback, call, microphone, and volume functions where supported by the connected device.

Is this answer helpful?

A

The ear tips may not be sealing properly. Try different silicone or foam tip sizes separately for each ear until the earphones fit securely. A proper seal improves bass response, comfort, and overall sound balance.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Supports high-quality Bluetooth codecs including LHDC, aptX HD, aptX Adaptive, AAC, and SBC.
  • Includes Bluetooth and 3.5 mm wired cables, giving listeners two connection options.
  • Ten pairs of silicone and foam ear tips help achieve a secure seal and tailored comfort.
  • Multipoint pairing supports up to two active devices, while storing up to eight paired devices.
  • MIY app support adds MOSAYC sound personalization, listening statistics, settings, and updates.
VS

Disadvantages

  • Available Bluetooth codecs and some remote functions depend on the connected playback device.
  • A poor ear-tip seal can reduce bass response and make the sound appear harsh.
  • In-ear isolation reduces awareness of ambient sound and may be unsafe in traffic or near machinery.
  • The battery is not intended for user removal, so end-of-life handling requires proper service procedures.
  • High-volume listening can cause permanent hearing damage, especially with in-ear headphones.
M: gpt-5.6-terra

Product Specification

Design

In-ear earphones

Form factor

no ear hooks, neckband

Acoustic design

closed-back

Microphone

detachable cable microphone, integrated

Connection

3.5 mm jack, USB-C

Wireless

Bluetooth 5.2, AAC, aptX, aptX HD, aptX Adaptive, LHDC, Google Fast Pair, Multipoint

Cable

detachable

Controls

3-button remote control

Battery life

14 hours

Battery

USB-C charging port, 1.7-hour charging time

Frequency range

10 Hz-50 kHz

Impedance

16 ohms

Sensitivity

114 dB

Drivers

0.43 in

Device features

water-resistant (IPX4)

Software features

voice assistant (Amazon Alexa, Apple Siri, Google Assistant), equalizer presets, custom equalizer, sound personalization, app control

Color

chrome

Weight

0.78 oz

M: gpt-5.6-terra

Product Description

beyerdynamic Xelento wireless 2nd Generation - Read, Download & Print Free

The beyerdynamic Xelento wireless 2nd Generation is a premium in-ear headphone system designed for listeners who want detailed sound, flexible connectivity, and a highly personalized fit. Its detachable MMCX cables let users switch between the included Bluetooth receiver and a 3.5 mm wired remote cable, making it suitable for daily mobile listening as well as traditional wired playback.

Designed for secure, comfortable listening

A close seal is central to both comfort and sound quality. The package includes seven pairs of silicone ear tips and three pairs of Comply Tx-500 foam tips, covering a broad range of ear shapes and preferences. The earphones are worn with the cable routed over the ears, helping reduce cable noise and improving stability while moving. A raised marking identifies the right side, while cable clips can help keep the lead tidy during calls or travel.

Wireless sound with advanced codec support

For Bluetooth listening, the Xelento wireless 2nd Generation supports A2DP, HFP/HSP, and AVRCP profiles for music, calls, and remote control. Compatible codecs include LHDC, aptX HD, aptX Adaptive, aptX, AAC, and SBC. LHDC is the highest-priority option when supported by the connected device, while codec availability ultimately depends on the source device.

The compact Bluetooth receiver provides volume buttons, a multifunction control, microphone, status LED, USB-C charging port, and power button. It supports pairing with up to eight devices and can maintain active connections to two devices through multipoint operation. Calls take priority over music, which is useful for moving between work and personal devices.

Controls, personalization, and wired flexibility

The built-in controls handle playback, track navigation, fast-forwarding, calls, and voice assistants such as Siri or Google Assistant. The beyerdynamic MIY app expands the experience with MOSAYC sound personalization, listening statistics, settings, and software updates. An enhancement mode, enabled by default, uses an additional DAC/amp stage to optimize sound fidelity.

When wireless listening is not required, the supplied 3.5 mm four-pole cable offers a direct connection with inline controls and microphone support on compatible devices. This dual-use approach makes the Xelento suitable for listeners who value both wireless convenience and a cable-based option.

Care and listening notes

Choose ear tips carefully, because an insufficient seal can reduce bass and make the sound seem harsh. Clean tips regularly, keep liquids away from the earphones, and store the set in its included case. Start at low volume and avoid extended high-volume listening, as in-ear headphones sit directly in the ear canal and can significantly reduce awareness of surrounding sounds.

Note: Bluetooth functions and remote-control features may vary with the connected smartphone, tablet, operating system, and supported audio codec.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly