beyerdynamic DT 797 PV Manual
PDF manual · 24 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your beyerdynamic DT 797 PV manual using AI
Get instant AI answers from your beyerdynamic DT 797 PV manual
Ask anything about the beyerdynamic DT 797 PV. Answers come from this manual, with the pages they are based on.
DT 797 PV Maintenance Schedule
Use a soft damp cloth with mild cleaning agents like washing-up liquid. Avoid solvent cleaners and ensure no water enters the transducer elements.
Replace ear pads regularly as they are subject to natural wear from skin moisture, cosmetics, and mechanical strain.
The additional pop shield can be washed in warm water but must be completely dry before reinstallation.
Ask a Question
Do you recommend DT 797 PV?
Yes NoFrequently Asked Questions
The standard impedance is 250 Ohms for the system.
Is this answer helpful?
Yes, the gooseneck is pivoting so it fits left or right.
Is this answer helpful?
It uses a condenser microphone with a cardioid polar pattern.
Is this answer helpful?
Use a soft damp cloth with mild soap. Do not use solvents.
Is this answer helpful?
It includes a 3-pin XLR male plug and a 6.35 mm stereo jack.
Is this answer helpful?
Yes, the system accepts phantom power between 12 and 48 volts.
Is this answer helpful?
Electronic waste must be recycled at designated collection points.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- High isolation from ambient noise due to closed acoustic design suitable for loud stages
- Condenser microphone with cardioid pattern for superior noise cancellation and voice clarity
- Fully pivoting gooseneck allows microphone positioning for either left or right ear preference
- Replaceable parts ensure longevity and easy servicing in professional environments
- Supports phantom power between 12 and 48 volts for versatile stage integration
Disadvantages
- 250 Ohm impedance requires adequate amplification for optimal performance across all devices
- Connecting cable is fixed and single-sided which limits flexibility during setup
- Ear pads require periodic replacement due to natural wear from skin contact and moisture
- Condenser microphone needs clean pop shield washing to maintain hygiene and sound quality
- Careful volume adjustment required before connecting to avoid permanent hearing damage risks
Product Specification
Type
Headphones (Over-Ear)
Form Factor
Headband
Principle
Closed-back
Microphone
Boom Microphone
Connection
0.25 inch Jack, Stereo Line In (XLR)
Wireless
No
Cable
Single-sided
Device Features
Rotating Ear Cups
Color
Black
Weight
0.87 lbs
Product Description
beyerdynamic DT 797 PV Headset Overview
Welcome to the world of professional audio with the beyerdynamic DT 797 PV headset. This device is designed for performers and professionals who demand high fidelity and reliability during live performances. The closed acoustic design ensures excellent isolation from ambient noise, making it ideal for concerts and loud stage environments. With a standard impedance of 250 Ohms, the system delivers precise sound reproduction while maintaining a balanced and spacious sound signature. This level of detail allows artists to hear every nuance without external interference disturbing the mix.
The microphone component is a major highlight of this specific model. It features a condenser element with a cardioid polar pattern. This configuration offers high gain-before-feedback and superior noise cancellation for voice clarity. Users can position the microphone on either the left or right ear due to the fully pivoting gooseneck design. Proper placement roughly two to three centimeters from the mouth corner minimizes popping sounds while capturing clear dialogue or vocals effectively. The connector options include a 3-pin XLR male plug and a 6.35 mm stereo jack plug allowing flexible integration with various mixing consoles and audio interfaces.
Safety is paramount when using wired equipment on stage to prevent accidents. Always ensure volume is minimized before connecting the headset to avoid permanent hearing damage. Avoid sharp movements that might cause the device to fall off your head, as the cable could become a hazard around accessories like piercings or glasses. The headband adjusts via yokes to fit various head sizes comfortably for long durations. Maintenance is straightforward and simple. Use a soft damp cloth for cleaning. Only mild agents like dish soap should be used. Never allow water into the transducer elements. Ear pads wear out over time due to skin contact and should be replaced periodically. The micro phone pop shield can be washed in warm water but must be fully dry before re-use for hygiene.
For detailed technical guidance and specifications regarding power usage, consulting the beyerdynamic DT 797 PV Manual provides deeper insight into operational limits and electrical characteristics. The build quality supports easy servicing with replaceable parts ensuring longevity in tough environments. It supports phantom power between 12 and 48 volts which is common in stage gear. Weight without cable is approximately 395 grams which is manageable for all-day wear. Frequency response ranges from 5 to 35000 Hz for headphones. Microphone frequency response spans 40 to 20000 Hz. Ensure you connect to devices with matching impedance for best performance and to prevent damage to the unit. This headset combines durability with professional audio standards for demanding applications. Finally remember to dispose of electronic waste properly according to local regulations to protect the environment.
Important Notes
Total weight is roughly 395 grams including headset and cable assembly. Check local recycling symbols. Ensure cables are secure. Verify phantom power needs. Keep units clean.
Search for 67,706 Manuals online
Type-in Brand or Model