Manual.ly Logo

Beper 40.400 Manual

0.0 · 0 Ratings

PDF manual · 32 Pages

English

M: gpt-5.6-terra
page

/ 32

Loading...
f2e3140b534021eeda3df188611394279524 page 7
7
Rotating hair curler Use instructions
EN
GENERAL SAFETY ADVICE
READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE
FIRST USE OF THE APPLIANCE.
Read the following instructions carefully, since they give you useful
safety information about installation, use and maintenance and help
you avoid mishaps and possible accidents.
Remove the packing and make sure that the appliance is intact, with
special attention to the supply cable. The elements of the packing
(plastic bags, polystyrene, etc) do not have to be accessible to the
children, in order to preserve them from danger sources.
It is recommended not to throw these packing material in the dome-
stic waste, but to deliver them to the appropriate station of collection
or destruction refusals, asking eventually information to the manager
of the Sanitation Department of your own municipality.
Before connecting the appliance make sure that the mains voltage
corresponds to the data specied on the label.
If the plug does not suit the socket, let it be replaced with another
suitable plug by qualied personnel only, which shall also ensure that
the section of the socket cables is suitable for your appliance power
absorption.
Never pull the supply cord to unplug the appliance.
Make sure that the supply cord never comes into contact with hot or
cutting surfaces
Do not use this appliance if the supply cord is damaged. In case of
damage, it must be replaced by the manufacturer, its service agent
or similarly qualied persons in order to avoid a hazard.
Only connect this appliance on alternating current
Generally, the use adaptors multiple plugs and/or extensions is not
recommended; should they be necessary, please use only simple or
multiple adaptors and extensions in compliance with the safety rules
in force, making sure that the capacity absorption limit marked on the
simple adaptors and the extensions and the maximum power limit
marked on the multiple adaptor are not exceeded.
This appliance is to be destined to its special purpose only.
Any other use is to be considered as improper and thus dangerous.
The manufacturer cannot be responsible for any damages deriving
from improper, wrong or incautious use.
To avoid any heating risk, it is recommended to unroll completely the
supply cord and to unplug the appliance, when not used.

Chat with your Beper 40.400 manual using AI

Get instant AI answers from your Beper 40.400 manual

Ask anything about the Beper 40.400. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend 40.400?

Yes No

Frequently Asked Questions

A

The Beper 40.400 Lady Blady is a rotating hair curler for creating curls and waves. It uses a rotating styling barrel, adjustable heat, selectable rotation direction, speed settings, and a curl timer to help users tailor their styling routine.

Is this answer helpful?

A

The temperature can be adjusted from 120 C to 220 C in 10 C steps. Lower temperatures are recommended for fine, bleached, or damaged hair. Medium settings suit normal or wavy hair, while higher settings can be used for thick or coarse hair.

Is this answer helpful?

A

The curler has five selectable rotation speeds, shown as levels 001 through 005. The speed can be changed through the mode settings using the M button and the plus or minus controls.

Is this answer helpful?

A

Yes. The Beper 40.400 includes a left/right directional switch. Changing the direction can help create curls that suit each side of the head and support a more symmetrical finished style.

Is this answer helpful?

A

The curl time can be set from 3 to 12 seconds. When the chosen time ends, the appliance gives an audible beep as a reminder. This helps users maintain a more consistent hold time across different hair sections.

Is this answer helpful?

A

Yes. The appliance has an automatic shutdown function after 60 minutes of inactivity. To use it again after automatic shutdown, press the power button. For manual shutdown, hold the power button for three seconds and unplug it.

Is this answer helpful?

A

Unplug the appliance and allow it to cool before cleaning. Wipe the housing and styling parts with a soft, damp cloth. Do not immerse it in water or let liquid enter the unit. Avoid solvents, alcohol, gasoline, and chemical cleaners.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Adjustable temperature range from 120 C to 220 C supports fine, normal, and thick hair types.
  • Five rotation speeds and left/right rotation direction provide flexible curl styling control.
  • Curl timer from 3 to 12 seconds uses an audible signal to indicate the selected timing.
  • Automatic shutoff after 60 minutes of inactivity adds a useful safety feature.
  • A 360-degree swivel cord and removable anti-scald device improve handling convenience.
VS

Disadvantages

  • The 45 W appliance requires access to a mains outlet during use.
  • Higher heat settings may not be suitable for fragile or damaged hair.
  • Users need to work with small sections, which can make full styling take time.
  • The appliance must cool completely before cleaning or storing.
  • Cleaning is limited to a soft damp cloth and does not allow chemical cleaners.
M: gpt-5.6-terra

Product Specification

Operating mode

Mains operation (45 W)

Color

black, white

Display

yes

Temperature settings

yes

Temperature range

248-428 degrees F

Special features

ceramic coating, swivel cord, safety stand

M: gpt-5.6-terra

Product Description

Beper 40.400 - Read, Download & Print Free

The Beper 40.400 Lady Blady is a rotating hair curler designed for creating defined curls, soft waves, and polished styling results at home. Its motorized rotating barrel helps guide small sections of hair while reducing the effort needed to shape each strand manually. With adjustable heat, direction, speed, and timing controls, it offers a flexible approach for different hair types and desired looks.

Adjustable Styling Control

The curler starts at 180 C and allows temperature adjustment from 120 C to 220 C in 10 C increments. Lower settings are recommended for fine, bleached, or damaged hair, while higher temperatures can be selected for thicker or coarser hair. This range makes it easier to adapt a styling routine to individual hair needs instead of relying on one fixed heat level.

Press the M button to switch between temperature, rotation speed, and curl timing settings. Five rotation speeds are available, allowing users to choose a gentler or quicker movement. The left and right direction control also supports more balanced styling on both sides of the head, helping curls frame the face naturally.

Timed Curls and Everyday Convenience

The Beper 40.400 includes a curl timer adjustable from 3 to 12 seconds. An audible signal indicates when the selected time is complete, offering a useful reminder during styling. For best results, work with small sections of hair, position the curler close to the roots, and guide it toward the ends. Repeat as needed until the preferred curl pattern is achieved.

A removable anti-scald device adds an extra measure of protection while handling the heated styling area. The 360-degree swivel cord is designed to move freely during use, which can make it more comfortable to reach different angles without the cord twisting around the hand or workspace.

Safety, Care, and Power

For added peace of mind, the appliance switches off automatically after 60 minutes of inactivity. To turn it off manually, hold the power button for three seconds, then disconnect it from the mains. Always allow the curler to cool fully before cleaning it.

The housing and styling parts should be wiped with a soft, damp cloth only. Avoid immersing the appliance in water or using solvents, alcohol, gasoline, or chemical cleaners. With 45 W power and a 100-240 V, 50/60 Hz supply range, the Beper 40.400 combines adjustable styling features with practical everyday operation.

Notes

  • Use small hair sections for more controlled results.
  • Begin with a lower temperature and increase only when necessary.
  • Keep the appliance away from water and unplug it before cleaning.
  • Use only when the power cable and appliance are in good condition.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly