Manual.ly Logo

Beha-Amprobe NCV-1020-EUR VOLTfix Manual

0.0 · 0 Ratings

PDF manual · 140 Pages

English

M: QW-35-FL
page

/ 140

Loading...
a7b010e326c02f81a952c42bd3bd4f18af37 page e
7
Safety
Compliance
IEC 61010-1 3rd Ed., UL 61010-1 3rd
Ed., UL 61010-2-030, CAN/CSA-C22.2
No.61010-1-12, CAN/CSA-C22.2 No.
61010-2-030-12 to CAT IV 1000 V,
Pollution degree 2, IP65
EMC
Compliance
IEC 61326-1
Korea (KCC): Class A Equipment
(Industrial Broadcasting &
Communication Equipment)
[1]
[1]
This product meets requirements
for industrial (Class A) electromagnetic
wave equipment and the seller or
user should take notice of it. This
equipment is intended for use in
business environments and is not to
be used in homes.
Certications
BATTERY REPLACEMENT & CARE
Low Battery Indication
The NCV-1030/1040-EUR (MAGNO-)VOLTx Voltage
Probe provide a low battery indication in the form
of a very slowly blinking red LED upon power on
when battery level is low and the batteries should
be replaced. At that point no voltage indication is
possible.
The NCV-1020-EUR VOLTx does not provide the
same indication; instead, batteries will need to be
replaced when no LED appears upon power on.
Battery Replacement
To remove the battery cap, use the thumb grip to
pull it upwards and outwards. Remove batteries
and replace with (2) AAA 1.5 V alkaline batteries,
noting the battery orientation as shown on the
side of the Voltage Probe. Replace the cap.
If the Voltage Probe will not be used for a long
period of time, remove the batteries.
Battery Cap
Latch

Chat with your Beha-Amprobe NCV-1020-EUR VOLTfix manual using AI

Get instant AI answers from your Beha-Amprobe NCV-1020-EUR VOLTfix manual

Ask anything about the Beha-Amprobe NCV-1020-EUR VOLTfix. Answers come from this manual, with the pages they are based on.

NCV-1020-EUR VOLTfix Maintenance Schedule

Before and after use
Test on known live source

Verify the probe works by testing on a known live source within rated voltage before and after each use.

Before use
Inspect probe tip for damage

Closely examine the probe tip for cracks or breakage. Do not use if damaged or not flashing upon power on.

As needed
Replace batteries

Replace with two AAA 1.5 V alkaline batteries when no LED appears upon power on (NCV-1020-EUR model).

Show in the manual (page 14)
During long storage
Remove batteries

If the Voltage Probe will not be used for a long period of time, remove the batteries to prevent leakage.

Show in the manual (page 14)
As needed
Clean the Voltage Probe

Clean with mild soapy water using a soft cloth. Allow to dry completely. Do not use aromatic hydrocarbons or gasoline.

Show in the manual (page 15)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend NCV-1020-EUR VOLTfix?

Yes No

Frequently Asked Questions

A

Press the ON/OFF button momentarily to activate the default voltage range. Press it again to switch to high sensitivity range. Hold for more than two seconds to turn it off.

Is this answer helpful?

A

It is rated CAT IV 1000 V for use at the source of low voltage installations and meets IEC and UL safety standards.

Is this answer helpful?

A

Pull the battery cap upwards and off. Insert two 1.5 V AAA alkaline batteries observing polarity marked on the side. Push the cap back on tightly.

Is this answer helpful?

A

No, this device is designed specifically for detecting AC voltage and will not provide indication for DC sources.

Is this answer helpful?

A

The product is covered by a one year limited warranty from the date of purchase regarding material and workmanship defects.

Is this answer helpful?

A

Yes, it has an IP65 rating which makes it resistant to water from low pressure jets and dust ingress for indoor and outdoor use.

Is this answer helpful?

A

The standard NCV-1020-EUR VOLTfix model does not detect magnetic fields. The NCV-1040-EUR MAGNO-VOLTfix model includes this feature.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • CAT IV 1000 V safety rating ensures highest level electric protection.
  • IP65 water and dust resistance allows use in harsh outdoor environments.
  • Dual range detection supports both high and low voltage AC systems.
  • Audible and visual alerts provide clear feedback during testing procedures.
VS

Disadvantages

  • Does not verify absence of voltage so secondary testing is required.
  • Battery life is limited by the auto power off feature timing.
  • Cannot detect magnetic fields as the higher MAGNO models can.
M: QW-35-FL

Product Specification

Measurement Range

50-1,000V

M: QW-35-FL

Product Description

Beha-Amprobe NCV-1020-EUR VOLTfix Review

The Beha-Amprobe NCV-1020-EUR VOLTfix Non-contact Voltage Tester stands as a premier tool for electrical professionals. It offers non-contact voltage detection up to 1000 volts AC without breaking the circuit. This capability ensures maximum safety for electricians working on live systems. The product design prioritizes user protection with a finger guard and automatic power off functionality. Operational flexibility includes dual voltage range settings. The default mode covers 50 to 1000 volts, while a high sensitivity range handles 12 to 50 volts for precise low voltage checks. Visual LED indicators and audible buzzers confirm voltage presence. The device responds to electrostatic fields generated by the source voltage. It can detect voltage through wire insulation or cable breaks. Identification of polarity on receptacles is possible within limits. Indoor and outdoor applications benefit from the IP65 waterproof rating. Safety compliance is paramount for this equipment. It meets CAT IV 1000 V measurement category standards. Certification includes IEC and UL guidelines. Users must test on a known live source before use. Always keep fingers behind the safety guard. Do not use if damaged or if lights fail to flash. Avoid applying voltage exceeding the rated mark on the probe. Battery life is optimized by the automatic shutdown after three minutes of inactivity. The unit requires two 1.5 volt AAA alkaline batteries. Guidance associated with the Beha-Amprobe NCV-1020-EUR VOLTfix Non-contact Voltage Tester Manual outlines specific care instructions. Cleaning should involve mild soapy water and a soft cloth. Avoid harsh solvents like gasoline or chlorinated cleaners. If not used for long periods, remove batteries to prevent leakage. The warranty provides one year of coverage from the purchase date against material defects. Service requires returning the tool with proof of purchase to an authorized center. Replacement units are available for defective tools within the warranty period. Applications extend to junction boxes, fuses, and extension cords. Troubleshooting becomes efficient with this compact tool. It fits easily in a pocket. The magnetic sensor testing applies to higher models but this version excels at standard voltage detection. Temperature operation ranges from zero to forty degrees Celsius. Storage conditions allow down to minus ten degrees Celsius. Altitude rating handles operations up to two thousand meters. Duty cycle is continuous during use. Current consumption remains low at eighty milliamps. These specifications ensure reliability across various job sites. Competent persons should always use this instrument. Training on risks is essential. The device is not for testing absence of voltage. Use a two-pole tester for that purpose. Keep the tip clean and inspect for cracks. Report any issues immediately. Adhere to local safety requirements. Use proper protective equipment as recommended. This product is built for industrial, commercial, and residential needs. It supports efficient diagnostics without interruption. Trust the quality from Beha-Amprobe for your electrical safety needs today. Service centers in the United States and Canada accept warranty returns for exchange. European units are handled through local distributors for nominal charges. Contact information is available on the Beha-Amprobe website for finding nearby locations. This ensures global support for the device. Proper handling extends the lifespan of the unit significantly. Regular calibration and inspection maintain accuracy throughout the operational life of the product. Electrical safety should always be the top priority for any technician. This device is a key component of a safe work environment.

Important Notes

Always verify battery status before use. Ensure the probe flashes on power on. Keep the finger guard intact at all times.

M: QW-35-FL

© Copyright 2026 Manual.ly