Manual.ly Logo

Beha-Amprobe AM-555-EUR Manual

0.0 · 0 Ratings

PDF manual · 364 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 364

Loading...
a8a818a3777ce2d069d5df0e79b1bc57b493 page 1f
25
Except for the replacement of the battery, repair of the meter should be
performed only by an Authorized Service Center or by other qualified
instrument service personnel.
The front panel and case can be cleaned with a mild solution of detergent and water.
Apply sparingly with a soft cloth and allow to dry completely before using. Do
not use aromatic hydrocarbons, gasoline or chlorinated solvents for cleaning.
BATTERY AND FUSE REPLACEMENT

WARNING
To avoid shock, injury, or damage to the Meter:
Disconnect test leads before opening case.
Use ONLY fuses with the amperage, interrupt, voltage, and speed
ratings specified.
Replacing BATTERY follow below steps:
1. Disconnect the test lead probe from measuring circuit.
2. Turn the meter to OFF position.
3. Remove the screws from the battery cover and open the battery cover.
4. Remove the batteries and replace with one 9V (6F22) or equivalent. The
battery cover provides the correct polarity fitting construction design.
Install the battery in the battery cover.
5. Put the battery cover back and re-fasten the screw.
Battery: 9V (6F22) battery or equivalent
Replacing FUSE follow below steps:
1. Disconnect the test lead probe from measuring circuit.
2. Turn the meter to OFF position.
3. Remove the screws from the enclosure and open the enclosure.
4. Remove the broken fuse and replace with new specified fuse.
5. Put the enclosure back and re-fasten the screw.
Fuse ratings:
mA /µA input terminal: F1 fuse, 0.5A H 1000V fast-fuse, ( 6.3×32)mm
10 A input terminal: F2 fuse, 11A H 1000V fast-fuse, ( 10×38)mm

Chat with your Beha-Amprobe AM-555-EUR manual using AI

Get instant AI answers from your Beha-Amprobe AM-555-EUR manual

Ask anything about the Beha-Amprobe AM-555-EUR. Answers come from this manual, with the pages they are based on.

AM-555-EUR Maintenance Schedule

When needed
Clean the front panel and case

Clean with a mild detergent and water solution using a soft cloth. Allow to dry completely before use.

Show in the manual (page 31)
When needed
Replace battery

Replace the 9V (6F22) battery if the low battery indicator appears or if the meter fails to operate.

Show in the manual (page 31)
When needed
Replace fuse

Replace the F1 or F2 fuse if the meter does not work or if continuity testing shows the fuse is burnt.

Show in the manual (page 31)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend AM-555-EUR?

Yes No

Frequently Asked Questions

A

The meter supports AC and DC voltage measurements up to 1000V for both AC and DC types. Ensure you do not apply more than the rated voltage between probes or to earth ground.

Is this answer helpful?

A

Disconnect probes first, turn the meter off, and open the case. Remove the broken fuse and replace it with the new specified type. Re-fasten the enclosure carefully.

Is this answer helpful?

A

It is rated CAT IV 600V and CAT III 1000V for use in the most demanding applications. This ensures safety when measuring at the source of low-voltage installations or building installations.

Is this answer helpful?

A

Yes, it features dual input temperature measurement using a K-type thermocouple. It can measure up to 230 degrees Celsius or 446 degrees Fahrenheit.

Is this answer helpful?

A

Returns during the warranty period should be sent with proof of purchase to an authorized Amprobe Service Center or dealer in the USA or Europe. Check the manual for specific addresses.

Is this answer helpful?

A

Yes, it has a dual backlight LC display with an analog bargraph. The HOLD button can turn the backlight on or off if needed.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • True-rms sensing measures voltage accurately on systems with harmonics.
  • Built-in flashlight helps identify wires in dark working conditions.
  • Non-contact voltage detection checks for live wires quickly.
  • Dual input temperature measurement supports two points simultaneously.
  • CAT IV 600V and CAT III 1000V safety ratings for demanding apps.
VS

Disadvantages

  • No warranty extension by resellers outside manufacturer terms.
  • Repair requires returning to authorized service center or dealer.
  • Low pass filter disables auto-ranging mode during use.
  • Temperature probe suitable only below 230 degrees Celsius.
  • Do not dispose as unsorted municipal waste in most regions.
M: qwen/qwen3.5-flash-20260224

Product Description

Beha-Amprobe Professional Multimeter Review

Welcome to a detailed overview of the Beha-Amprobe AM-5xx-EUR Multimeter Manual contents. This guide highlights the extensive features designed for electricians needing robust tools. It ensures safety and precision when handling complex electrical systems.

Advanced Measurement Capabilities

True-rms sensing accurately measures voltage on systems affected by harmonics. A built-in flashlight allows you to identify wires while working in dark conditions. Non-contact voltage detection allows for quick go-no-go checks without the need for an additional tool. The AM-555-EUR also features dual input temperature measurement capability. It includes a low-impedance function to detect stray voltage sources. A low pass filter ensures measurements on variable frequency drives remain accurate.

Safety Ratings and Specifications

Safety rated to CAT IV 600V and CAT III 1000V allows use in the most demanding applications. Measurements cover AC and DC voltage up to 1000V efficiently. AC and DC current capability supports up to 20A for short intervals. Resistance, frequency, capacitance, and temperature readings are fully supported. Duty cycle measurement is also available for advanced diagnostics. Overload protection is rated at 1000V to ensure device security.

Service Centers and Maintenance

European customers contact distributors in Glottertal Germany for support. Fuses F1 and F2 are specified for mA and A inputs. The manual includes symbols for caution and electrical shock risks. Calibration should be done by authorized personnel only. Do not dispose of product as unsorted municipal waste.

Display and Operational Controls

The dual backlight LC display offers clear visibility in low light. Analog bargraph updates 20 times per second for quick visual feedback. Auto power off engages after 15 minutes of inactivity. Data hold freezes present readings for easier analysis. Maximum and minimum memory stores event peaks effectively. Relative zero mode calculates values based on stored reference data.

Warranty and Guidelines

Regular maintenance is required to ensure operational longevity for the device. Users must replace batteries and fuses using correct specifications provided by the manufacturer. Double check operating instructions before attempting new procedures in the field. Clean the case front panel with a mild detergent solution only. Avoid harsh solvents like gasoline or aromatic hydrocarbons entirely. Authorized service centers handle repairs outside the warranty period properly. The one-year warranty covers defects in material and workmanship. Return units with proof of purchase for service claims.

The guide serves as your primary reference for proper operation procedures. Follow all safety warnings listed inside to prevent personal injury or damage. Store the equipment safely when not in use or during transport.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly