Beha-Amprobe 2100-Beta Manual
PDF manual · 218 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Beha-Amprobe 2100-Beta manual using AI
Get instant AI answers from your Beha-Amprobe 2100-Beta manual
Ask anything about the Beha-Amprobe 2100-Beta. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend 2100-Beta?
Yes NoFrequently Asked Questions
The Beha-Amprobe 2100-Beta measures 6 V to 690 V AC/DC on its LCD display. Its LED indicators show nominal levels from 12 V through 690 V.
Is this answer helpful?
Yes. It detects AC and DC voltage automatically. For DC measurements, it indicates polarity relative to the L2 test probe. For AC voltage, the plus and minus LEDs illuminate together.
Is this answer helpful?
Yes. It provides visual and audible continuity testing up to approximately 500 kOhm, along with diode test capability. The circuit must be de-energized before performing a continuity test.
Is this answer helpful?
Data Hold stores the last measured voltage on the LCD, which can be useful when the display is difficult to view during testing. The LED voltage row continues to indicate the actual live voltage while HOLD is active.
Is this answer helpful?
Yes. During an L-to-PE voltage test in an appropriate 230 V AC system, pressing both load buttons can trip a 10 mA or 30 mA RCD. The stated test current exceeds 30 mA at 230 V AC.
Is this answer helpful?
It has an IP64 rating for dust protection and splash resistance, allowing use in humid conditions. It should only be used within its specified temperature, humidity, measurement range, and safety category limits.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Dual LED and LCD voltage display supports quick checks and digital readings from 6 V to 690 V AC/DC.
- CAT IV 600 V and CAT III 690 V ratings, IP64 protection, and GS approval suit professional environments.
- Includes data hold, continuity and diode testing, phase rotation, phase indication, load test, and RCD trip capability.
- White torch and LCD backlight improve visibility when working in dark distribution panels or cabinets.
Disadvantages
- The 2100-Beta does not include resistance measurement or non-contact cable-break detection, which are Gamma-only functions.
- Load testing has a limited duty cycle of 30 seconds on followed by 240 seconds off.
- Data Hold freezes the LCD reading until released, so users must rely on LEDs for the current voltage while HOLD is active.
- Single-pole phase testing is not suitable for confirming that a circuit is de-energized.
Product Specification
Measurement range
6-690 V
Product Description
Beha-Amprobe 2100-Beta Voltage Tester - Read, Download & Print Free
The Beha-Amprobe 2100-Beta Voltage Tester is a rugged two-pole tester designed for electricians who need dependable voltage and continuity checks in commercial and industrial settings. Its practical combination of LED indicators and a digital LCD display helps users assess electrical conditions clearly, from quick presence checks to more precise voltage readings.
Clear Voltage Testing for Everyday Electrical Work
The 2100-Beta measures AC and DC voltage from 6 V to 690 V on its LCD, while the LED scale provides fast visual indication at 12, 24, 50, 120, 230, 400, and 690 V. Automatic AC/DC detection and polarity indication support efficient troubleshooting, and an audible warning activates at 50 V AC or 120 V DC. The tester powers on automatically when voltage above approximately 10 V is detected.
For situations where induced or capacitive voltage may affect a reading, the two load buttons apply a lower internal resistance. This load test can help suppress interference voltages. The same buttons can be used during an L-to-PE check to trip a 30 mA RCD in suitable 230 V AC systems.
Features That Support Productive Testing
Beyond two-pole voltage measurements, the 2100-Beta provides continuity and diode testing with visual and audible feedback. Its continuity range extends to approximately 500 kOhm, making it useful for basic wiring checks after the circuit has been confirmed de-energized. A single-pole phase test and two-probe phase rotation indication add useful diagnostic capability for installation and maintenance work.
The LCD data hold function stores the last measured voltage value for easier viewing in awkward locations. Note that, while HOLD is active, the LCD keeps the stored value, while the LED row continues to show the live circuit condition. A white measurement-area light and LCD backlight improve visibility in dim panels, cabinets, and service areas.
Built for Demanding Environments
With CAT IV 600 V and CAT III 690 V ratings, IP64 dust and splash protection, and compliance with IEC 61243-3:2014 and EN 61243-3:2014, the 2100-Beta is built for professional low-voltage applications. GS 38 protective probe caps and screwable 4 mm probe extensions support safer, more adaptable testing. The tester uses two AAA batteries and has an automatic shutoff after about 30 seconds of inactivity.
Notes
- Test the unit on a known voltage source before and after use.
- Use a two-pole test to verify absence of voltage; single-pole testing is not sufficient.
- Follow local safety rules and use appropriate protective equipment.
- Do not use the tester if it is damaged, malfunctioning, or has leaking batteries.
Search for 67,706 Manuals online
Type-in Brand or Model
accusamus_quaerat
4 months ago
Is this voltage tester reliable and easy to use for everyday electrical checks?
Manual.ly
4 months ago
Customers report that the voltage tester works as intended and has already proved useful shortly after purchase. Delivery was also described as fast.