Manual.ly Logo

Be Cool Premium Split Manual

0.0 · 0 Ratings

PDF manual · 152 Pages

English

M: OA-GPT-54-NAN
page

/ 152

Loading...
f0b74be99bc6ab93fc9a0a10f8c041493609 page 4e
1. Read this guide before installing and using the appliance.
2. During the installation of the indoor and outdoor units, access to the working area should be
forbidden to children. Unforeseeable accidents could happen.
3. Make sure that the base of the outdoor unit is firmly fixed.
4. Check that air cannot enter the refrigerant system and check for refrigerant leaks when moving
the air conditioner.
5. Carry out a test cycle after installing the air conditioner and record the operating data.
6. Protect the indoor unit with a fuse of suitable capacity for the maximum input current or with
another overload protection device.
7. Ensure that the mains voltage corresponds to that stamped on the rating plate. Keep the switch
or power plug clean. Insert the power plug correctly and firmly into the socket, thereby avoiding
the risk of electric shock or fire due to insufficient contact.
8. Check that the socket is suitable for the plug , otherwise have the socket changed.
9. The appliance must be fitted with means for disconnection from the supply mains having a
contact separation in all poles that provide full disconnection under over voltage category III
conditions, and these means must be incorporated in the fixed wiring in accordance with the
wiring rules.
10. The air conditioner must be installed by professional or qualified persons.
11. Do not install the appliance at a distance of less than 50 cm from inflammable substances
(alcohol, etc.) Or from pressurized containers (e.g. spray cans).
12. If the appliance is used in areas without the possibility of ventilation, precautions must be taken
to prevent any leaks of refrigerant gas from remaining in the environment and creating a danger
of fire.
13. The packaging materials are recyclable and should be disposed of in the separate waste bins.
Take the air conditioner at the end of its useful life to a special waste collection center for disposal.
14. Only use the air conditioner as instructed in this booklet. These instructions are not intended to
cover every possible condition and situation. As with any electrical household appliance, common
sense and caution are therefore always recommended for installation, operation and maintenance.
15. The appliance must be installed in accordance with applicable national regulations.
16. Before accessing the terminals, all the power circuits must be disconnected from the power supply.
17. The appliance shall be installed in accordance with national wiring regulations.
18. This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
SAFETY RULES AND RECOMMENDATIONS FOR THE INSTALLER
SAFETY PRECAUTIONS
1

Chat with your Be Cool Premium Split manual using AI

Get instant AI answers from your Be Cool Premium Split manual

Ask anything about the Be Cool Premium Split. Answers come from this manual, with the pages they are based on.

Premium Split Maintenance Schedule

Remind me when maintenance is due
Monthly
Clean the air filter

Remove the filter and clean with soapy water. Rinse and air dry before reinstalling. Increase frequency in dusty environments.

Show in the manual (page 102)
Quarterly
Run self-clean function

Activate the Self-Clean function to remove dirt and bacteria from the indoor evaporator. Recommended every 3 months.

Show in the manual (page 113)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Premium Split?

Yes No

Frequently Asked Questions

A

Its main benefit is balanced comfort. The 12,000 BTU capacity is strong enough for many small to medium rooms, while the split design helps deliver steady, efficient airflow with more precise temperature control.

Is this answer helpful?

A

Yes, the unit supports multiple operating modes, including cooling and heating on compatible versions. It can also run in fan and dry modes, making it useful throughout the year.

Is this answer helpful?

A

Yes. The system is intended for professional installation because it uses refrigerant lines, electrical connections, and safety checks that should be handled by trained technicians.

Is this answer helpful?

A

The unit includes safety-oriented guidance such as leak testing, grounding, ventilation requirements, an emergency button, error-code reporting, and operating limits to help prevent misuse.

Is this answer helpful?

A

The filter should be cleaned regularly to keep airflow strong and the system efficient. Dust buildup can reduce performance, so routine cleaning helps maintain healthier indoor air and smoother operation.

Is this answer helpful?

A

No. Some functions such as self-clean, health, quiet wind, or Wi‑Fi may depend on the exact version. It is best to check the specific model features before purchase.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 12,000 BTU capacity suits everyday cooling needs in bedrooms, living rooms, or small offices.
  • Multiple modes and fan settings make it useful across different seasons and comfort preferences.
  • R32 refrigerant and safety protections support efficient operation when installed correctly.
  • Maintenance is easier thanks to accessible filters, error codes, and optional self-clean features.
VS

Disadvantages

  • Installation must be handled by qualified personnel, which adds cost and complexity.
  • R32 requires careful handling because the refrigerant is flammable under unsafe conditions.
  • Several features depend on the exact model, so not every unit includes the same functions.
  • The system has strict spacing, ventilation, and room-size requirements that limit placement options.
M: OA-GPT-54-NAN

Product Specification

Type

1x indoor unit, 1x outdoor unit

Energy efficiency class

A++ (cooling), A+ (heating)

Energy consumption

195 kWh/year (cooling), 840 kWh/year (heating)

Energy efficiency rating

6.1 (SEER), 4.0 (SCOP)

Cooling capacity

11,593.28 BTU/h

Heating capacity

8,189.14 BTU/h

Recommended room size

max. 3,707.02 ft3

Fan function

yes

Special features

App control (WLAN), Dehumidification function, Heating function, Air filtration, Sleep mode, 24h timer, Voice control (Amazon Alexa)

Air circulation indoor unit

323.72 cfm

Refrigerant

R32

Mounting type indoor unit

Wall mount

Mounting type outdoor unit

Freestanding

Noise level indoor unit

51dB(A)

Noise level outdoor unit

60dB(A)

Dimensions indoor unit

30.59x9.84x7.91 in (WxHxD)

Dimensions outdoor unit

30.59x19.61x11.42 in (WxHxD)

Weight indoor unit

18.74 lb

Weight outdoor unit

55.12 lb

Scope of delivery

Remote control, Copper pipe 13.12 ft, Vibration dampers

M: OA-GPT-54-NAN

Product Description

Be Cool Premium Split Air Conditioner 12,000 BTU

The Be Cool Premium Split Air Conditioner 12,000 BTU is built for dependable comfort in everyday living spaces, pairing practical cooling power with a broad set of convenience features. Designed for homes that need more than basic temperature control, it offers a refined balance of performance, safety, and user-friendly operation. Whether you are trying to cool a bedroom, living room, or compact office, this split system aims to deliver steady airflow and a more pleasant indoor climate.

One of its strongest qualities is flexibility. The unit supports multiple modes, including cooling, heating, drying, fan operation, and auto control, so it can adapt to changing seasons and indoor conditions. The Be Cool Premium Split Air Conditioner 12,000 BTU Manual emphasizes proper setup, airflow management, and safe operation, which reflects how much attention the system gives to reliable long-term use. It also includes useful comfort tools such as timer scheduling, sleep settings, swing functions, and adjustable fan speeds, helping users fine-tune the experience to match their routine.

The model is also designed with maintenance in mind. Easy-access filters, self-cleaning support on selected versions, anti-mildew protection, and clear service guidance help keep the system working efficiently over time. The use of R32 refrigerant adds to its modern profile, offering an efficient cooling solution while requiring careful, professional handling during installation and servicing. That makes it a good fit for buyers who value performance but also understand the importance of correct setup.

Another highlight is the safety-focused design. The instructions stress ventilation, correct spacing, leak checks, grounded electrical connections, and careful installation by qualified personnel. Features like the emergency button, error-code display, and protective operating limits can help users and technicians respond quickly if something is not right. In daily use, that creates a more reassuring experience and supports stable operation.

Overall, this air conditioner stands out as a practical choice for users who want strong cooling capacity, flexible control, and thoughtful safety features in one package. It is especially appealing for people looking for a dependable split system that can handle both comfort and maintenance with less hassle.

Notes

  • Professional installation is strongly recommended.
  • Keep vents, filters, and drainage paths clear.
  • Follow spacing and ventilation requirements for best results.
  • Some functions may vary depending on the model.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly