Be Cool BCRS2102F Manual
PDF manual · 33 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Be Cool BCRS2102F manual using AI
Get instant AI answers from your Be Cool BCRS2102F manual
Ask anything about the Be Cool BCRS2102F. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend BCRS2102F?
Yes NoFrequently Asked Questions
The stated coverage area is up to 60 m2. Its maximum air volume is 400 m3/h. For ozone treatment, the recommended duration ranges from 15 minutes for 7.5 m2 to 120 minutes for 60 m2.
Is this answer helpful?
No. People, animals and plants must not be in the room during ozone treatment. Ozone may be harmful when inhaled. The room must also remain unoccupied during the automatic two-hour normal purification period that follows treatment.
Is this answer helpful?
During ozone operation and the following two-hour purification period, the sensor monitors an area stated as up to 6 m with 120-degree coverage. If movement is detected, ozone production stops and rapid visual and audible warnings activate.
Is this answer helpful?
The unit includes a HEPA 13 filter, ionisation, UVB air treatment, three fan speeds, swing airflow distribution and an ozone cleaning mode. These functions can be operated from the control panel or supplied remote control.
Is this answer helpful?
Vacuum the outside of the HEPA filter about every eight weeks. Replace it every 12 months or after 3,000 operating hours. Do not clean the filter with water; allow it to air out in a well-ventilated non-living area after vacuuming.
Is this answer helpful?
Wait until the ozone cycle and the automatic two-hour normal purification period have both finished. Check the indicator afterward: blue means the room may be occupied, while orange means the room should be left immediately.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Covers rooms up to 60 m2 with an air volume rated at 400 m3/h.
- Combines HEPA 13 filtration, ionisation, UVB treatment, swing airflow and three fan speeds.
- Ozone mode offers adjustable treatment times from 15 to 120 minutes based on room size.
- Motion sensing, warning sounds and orange status lights add safeguards during ozone operation.
- Filter maintenance is straightforward: vacuum every eight weeks and replace after 12 months or 3,000 hours.
Disadvantages
- Ozone can cause serious health effects, so people, pets and plants must leave the room during treatment.
- The room cannot be used during ozone treatment or the mandatory two-hour follow-up purification cycle.
- Ozone use requires sealing openings and controlling access to prevent exposure outside the room.
- The motion sensor pauses ozone production but operation resumes when movement is no longer detected.
- HEPA filter replacement is a recurring maintenance cost and filters are excluded from warranty coverage.
Product Specification
Power
55 W
Color
black
Recommended room size
up to 646 sq ft
Power levels
3
Air circulation
235.43 CFM
Filtration
HEPA filter (H13, 99.95%)
Special features
switchable ionization, switchable UV disinfection
Dimensions
9.45 x 22.83 x 9.45 in (W x H x D)
Weight
11.46 lb
Product Description
Be Cool Room Sterilizer 60m2 Air Purifier - Read, Download & Print Free
The Be Cool Room Sterilizer 60m2 Air Purifier is designed for household air treatment in rooms up to 60 m2. Combining a HEPA 13 filter, ionisation, UVB treatment, adjustable airflow and ozone cleaning, it offers several ways to support a fresher indoor environment. With an air volume of up to 400 m3/h and a compact upright design, it is suited to living spaces where airflow, dust control and odour reduction are important.
Multi-Stage Air Treatment
For everyday use, the HEPA 13 filter captures airborne dust and particles while the three-speed fan lets users adjust airflow to the room's needs. The swing function distributes outgoing air horizontally, helping circulation reach a broader area. An ioniser adds ionised air, while the internal UVB function is intended to treat air drawn through the unit. UVB mode automatically uses the lowest fan speed and switches off after eight hours.
Ozone Cleaning for Unoccupied Rooms
A defining feature is the ozone cleaning mode, which produces ozone at up to 400 mg/h. The manufacturer describes ozone as an oxidising agent for treating persistent odours and contaminants. Because ozone can be harmful when inhaled, this function requires strict safety measures. People, pets and plants must be removed, the room should be sealed, and entry must be prevented during operation.
Ozone treatment can be selected in 15-minute steps, from 15 minutes for 7.5 m2 up to 120 minutes for 60 m2. Once the ozone cycle ends, the purifier automatically runs for two additional hours in normal cleaning mode. The room must remain empty during this period. A blue indicator signals that the room may be occupied, while an orange indicator means it must be vacated.
Safety-Focused Operation
The unit includes audible and visual ozone alerts plus a motion sensor with a stated 6 m range and 120-degree coverage. When movement is detected during ozone operation, ozone production stops and a rapid warning alarm activates. The appliance should be positioned facing the door to support sensor performance. It must only be used indoors, away from moisture, heat sources, flammable materials and blocked air openings.
Care and Key Details
Regular maintenance helps preserve performance. The filter should be vacuumed every eight weeks and replaced every 12 months or 3,000 operating hours. Never wash the filter with water. The purifier has a 55 W power rating, measures approximately 240 x 240 x 585 mm, weighs 5.2 kg, and includes a remote control using a CR2025 battery.
Note: Ozone mode is not a presence-safe air-cleaning setting. Follow all safety instructions, allow the complete post-treatment cycle to finish, and provide suitable fresh-air ventilation before re-entering.
Search for 67,706 Manuals online
Type-in Brand or Model