Manual.ly Logo

Be Cool BC52LR2101 Manual

0.0 · 0 Ratings

PDF manual · 32 Pages

English

M: QW-35-FL
page

/ 32

Loading...
eae96227b743407de2526409cfa65ac16018 page e
Seite 14 von 32
WARTUNG UND REINIGUNG
Gerät Reinigen (alle 2 Wochen)
Schalten Sie das Gerät vor der Reinigung aus, warten Sie einige Minuten und ziehen Sie
dann stets den Stecker, um das Gerät vom elektrischen Netz zu trennen.
Reinigen Sie das Gerät mit einem mäßig feuchten, weichen Tuch und wischen Sie es
anschließend mit einem trockenen weichen Tuch ab.
Das Gerät aus Sicherheitsgründen nie mit Wasser reinigen. Dies könnte gefährlich
sein.
Verwenden Sie zur Reinigung nie Benzin, Alkohol oder Lösungsmittel.
Sprühen Sie keine Insektizide oder ähnliche Mittel auf den Luftreiniger.
Reinigung des Vorfilters (alle 2 Wochen)
Zur Beseitigung des in den Vorfilter angesammelten Staubes benutzen Sie einen
Staubsauger.
Ist der Vorfilter sehr schmutzig, können Sie diesen in Warmwasser tauchen und
mehrmals durchspülen – allerdings sollte die Wassertemperatur nicht 40°C
überschreiten.
Lassen Sie den Luftfilter nach dem Waschen gut austrocknen, und dann setzten Sie
diese wieder ein.
HINWEIS
Benutzen Sie das Gerät nie ohne den Vorfilter.
Setzten Sie den Filter erst, ein wenn er vollständig getrocknet ist..
Reinigung des HEPA & Aktivkohle Filters (alle 2 Wochen)
Zur Beseitigung des an der Außenseite des Filters angesammelten Staubes
benutzen Sie einen Staubsauger.
Entnehmen Sie den Filter und stellen Sie Ihn für 12 Stunden an einem gut
durchlüfteten Ort, außerhalb von Wohnräumen ab.
Dadurch können im Filter angesammelte Partikel und Stoffe aus dem Filter austreten.
Tausch der Filter (Wenn die Anzeige blinkt, ca. 6-9 Monate)
Tauschen Sie den Filter wenn der - Indikator blinkt.
HINWEIS
Gehen Sie beim Tausch des Filters vor wie im Bereich „INBETRIEBNAHME“ beschrieben.

Chat with your Be Cool BC52LR2101 manual using AI

Get instant AI answers from your Be Cool BC52LR2101 manual

Ask anything about the Be Cool BC52LR2101. Answers come from this manual, with the pages they are based on.

BC52LR2101 Maintenance Schedule

Remind me when maintenance is due
Weekly
Clean the air filter

The manual states the air filter must be cleaned at least once a week to maintain good condition.

Every 2 weeks
Clean the appliance housing

Unplug device. Wipe with a moderately damp soft cloth and dry with a soft cloth. Do not use water, petrol, alcohol, or solvents.

Show in the manual (page 14)
Every 2 weeks
Clean the pre-filter

Use a vacuum to remove dust. If very dirty, rinse in warm water (max 40°C). Let dry completely before reinserting.

Show in the manual (page 14)
Every 2 weeks
Clean HEPA and activated carbon filters

Vacuum outside dust. Remove filters and place in a well-ventilated area outside living spaces for 12 hours to release trapped particles.

Show in the manual (page 14)
Every 6-9 months
Replace HEPA and activated carbon filters

Replace filters when the indicator light flashes. Service life is approx. 6-9 months with daily use of about 8 hours.

Show in the manual (page 14)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend BC52LR2101?

Yes No

Frequently Asked Questions

A

The pre-filter should be cleaned every two weeks using a vacuum or warm water below 40 degrees Celsius. The main HEPA and carbon filters require replacement approximately every 6 to 9 months when the indicator light flashes.

Is this answer helpful?

A

It is highly recommended to use distilled water only. Tap water can cause mineral deposits inside the humidification unit and reduce the lifespan of the device or create white dust in the air.

Is this answer helpful?

A

A blue light indicates excellent air quality with PM2.5 levels between 0 and 50. The light changes to green, yellow, or red as pollution levels increase, signaling the need for higher fan speeds.

Is this answer helpful?

A

Yes, the smart mode uses internal sensors to detect air quality and automatically adjusts the fan speed from low to turbo to maintain clean air without manual intervention.

Is this answer helpful?

A

The standard two-year warranty provided by Be Cool is currently valid only in Austria. Repairs outside authorized service centers in this region may void the warranty coverage.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Advanced HEPA H13 and activated carbon filtration removes fine particles effectively
  • Smart mode automatically adjusts fan speed based on real-time air quality sensors
  • Built-in humidifier maintains healthy humidity levels between 45% and 60%
  • Low noise sleep mode with dimmed display for undisturbed nighttime use
  • Includes timer function allowing scheduling up to 12 hours for energy savings
VS

Disadvantages

  • Requires distilled water for the humidification tank to prevent mineral buildup
  • Filters must be replaced every 6 to 9 months depending on usage intensity
  • Device requires a minimum clearance of 30 cm from walls for proper airflow
  • Ionizer function may produce a slight ozone smell if used in poorly ventilated areas
  • Pre-filter needs weekly cleaning to maintain optimal suction power
M: QW-35-FL

Product Specification

Power

70W

Color

white

Recommended Room Size

up to 561 sq ft

Speed Levels

3

Air Circulation

224 cu ft/h

Filtration

HEPA Filter (H13, 99.95%), Activated Carbon Filter, Pre-filter

Features

LED Lighting, Timer, Ionization

Noise Level

max. 84 dB(A)

Dimensions

15x21.6x8.8 in (WxHxD)

Weight

13.67 lbs

M: QW-35-FL

Product Description

Experience Pure Air with the Be Cool 52m² Air Purifier

Welcome to a cleaner, healthier living space with the Be Cool 52m² Air Purifier. This innovative device is designed specifically for medium-sized rooms, ensuring that every breath you take is free from harmful pollutants. Whether you are dealing with dust, pet dander, or allergens, this purifier delivers powerful performance using advanced HEPA H13 filtration technology combined with an activated carbon filter.

The unit features a sleek design equipped with a user-friendly control panel and a clear display that monitors PM2.5 levels and humidity in real-time. One of its standout capabilities is the integrated humidification system, which automatically maintains optimal humidity levels between 45% and 60%, promoting respiratory health without the need for manual adjustments. The Smart Mode allows the device to adapt fan speeds instantly based on current air quality, while the Sleep Mode ensures quiet operation with dimmed lights for undisturbed rest.

Maintenance is straightforward, with washable pre-filters and a timer function that helps manage energy usage. The device also includes an ionizer to neutralize static electricity, adding another layer of protection for your home environment. With a CADR rating of 380 m³/h, it efficiently circulates and cleans the air throughout your room within minutes. Safety is paramount, featuring automatic shut-off mechanisms and robust construction to prevent accidents. Upgrade your indoor air quality today with a product that combines efficiency, intelligence, and reliability.

M: QW-35-FL

© Copyright 2026 Manual.ly