Manual.ly Logo

Be Cool BC22LR2105 Manual

0.0 · 0 Ratings

PDF manual · 24 Pages

English

M: QW-35-FL
page

/ 24

Loading...
343a66551800fd8c61ecd53ea2bea8e0576b page b
Seite 11 von 24
Reinigung des 3-in-1 Filters (alle 4 Wochen)
Zur Beseitigung des an der Außenseite des Filters angesammelten Staubes benutzen
Sie einen Staubsauger.
Entnehmen Sie den Filter und stellen Sie Ihn für 12 Stunden an einem gut durchlüfteten
Ort, außerhalb von Wohnräumen ab. Dadurch können im Filter angesammelte Partikel
und Stoffe aus dem Filter austreten.
Setzen Sie den Filter anschließend wieder ein.
Reinigen Sie den Filter nicht mit Wasser oder anderen Flüssigkeiten.
Tausch der Filter (Wenn die Anzeige blinkt, ca. 6 Monate oder 2.200 Stunden)
Tauschen Sie den Filter wenn der - Indikator blinkt.
HINWEIS
Gehen Sie beim Tausch des Filters vor, wie im Bereich „INBETRIEBNAHME“ beschrieben
Luftqualitätssensor Reinigen (alle 4 Wochen)
Der Sensor sollte gereinigt werden, wenn das Gerät falsche Werte anzeigt.
Der Luftqualitätssensor befindet sich in der Griffmulde auf der rechten Seite des
Geräts.
Nehmen Sie die Abdeckung ab, indem Sie die Sicherungslasche auf der Unterseite
nach oben drücken.
Reinigen Sie den Sensor mithilfe eines trockenen Wattestäbchens und setzen die
Abdeckung wieder auf.

Chat with your Be Cool BC22LR2105 manual using AI

Get instant AI answers from your Be Cool BC22LR2105 manual

Ask anything about the Be Cool BC22LR2105. Answers come from this manual, with the pages they are based on.

BC22LR2105 Maintenance Schedule

Remind me when maintenance is due
Weekly
Clean the air filter

The manual states the air filter should be cleaned at least once a week to maintain good condition.

Every 2 weeks
Clean the appliance exterior

Unplug the device. Wipe with a moderately damp cloth and dry. Do not use water, petrol, alcohol, or solvents.

Show in the manual (page 10)
Monthly
Clean the filter cover

Use a vacuum to remove dust. If very dirty, wash in warm water (max 40°C), rinse, and let dry completely before reinstalling.

Show in the manual (page 10)
Monthly
Clean the 3-in-1 filter

Vacuum dust from the outside. Place filter in a well-ventilated area for 12 hours to release trapped particles. Do not wash with water.

Show in the manual (page 11)
Monthly
Clean the air quality sensor

Remove the sensor cover located in the handle recess. Clean the sensor with a dry cotton swab and replace the cover.

Show in the manual (page 11)
Every 6 months
Replace the filter

Replace the filter when the indicator flashes, which occurs after approx. 2,200 operating hours (about 6 months of daily use).

Show in the manual (page 11)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend BC22LR2105?

Yes No

Frequently Asked Questions

A

The air filter should be cleaned at least once a week using a vacuum cleaner. Additionally, remove the filter and let it air out for 12 hours outside every four weeks to release trapped particles.

Is this answer helpful?

A

A red light indicates poor air quality with PM2.5 levels exceeding 100. The device will automatically increase the fan speed to high to purify the air more aggressively until levels improve.

Is this answer helpful?

A

Yes, the timer can be used in any operating mode including sleep mode. You can set it to shut off the unit after 1, 2, 4, or 8 hours of operation.

Is this answer helpful?

A

After replacing the filter, press and hold the filter reset button for three seconds while the unit is on. The indicator light will turn off to confirm the reset was successful.

Is this answer helpful?

A

No, the Be Cool 24m² Air Purifier is strictly designed for indoor use only. Using it outdoors may damage the unit and void the warranty.

Is this answer helpful?

A

Leaving the plastic film on the filter will block airflow and can cause permanent damage to the motor. Always remove the film before first use.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • HEPA H13 filtration captures 99.97% of fine particles
  • Auto mode adjusts fan speed based on real-time air quality
  • Silent sleep mode ideal for bedrooms and nurseries
  • Visual air quality indicators provide instant feedback
  • Easy maintenance with washable cover and accessible sensor
VS

Disadvantages

  • Filter must be replaced every six months for best results
  • Requires minimum 30cm clearance from walls for airflow
  • Cannot be used outdoors or in high humidity areas
  • No remote control included for operation
  • Extension cords are not recommended due to fire risk
M: QW-35-FL

Product Specification

Power

42W

Color

white, black

Recommended Room Size

up to 258 sq ft

Power Levels

3 (automatic power regulation)

Air Circulation

7062 cu ft/h

Filtration

HEPA Filter (H13, 99.95%), Activated Carbon Filter

Features

Filter Saturation Indicator, Timer, Ionization, Air Quality Monitoring

Noise Level

max. 49dB(A)

Dimensions

12.9x22.0x8.7 in (WxDxH)

Weight

11.02 lbs

M: QW-35-FL

Product Description

Be Cool 24m² Air Purifier: Breathe Cleaner Air Today

The Be Cool 24m² Air Purifier is designed to transform the air quality in your living space with advanced efficiency and ease of use. This compact yet powerful unit features a HEPA H13 filter that captures fine dust, allergens, and pollutants effectively. Whether you are dealing with seasonal allergies or simply want fresher indoor air, this purifier adapts to your environment automatically.

Equipped with an intelligent Auto Mode, the device continuously monitors air quality using a built-in sensor. It adjusts fan speeds dynamically based on PM2.5 levels, ensuring optimal performance without manual intervention. The visual indicators provide real-time feedback, glowing blue for excellent air, green for good, and red when purification is needed most. For those who value quiet operation, the dedicated Sleep Mode dims all lights and runs at the lowest speed, creating a peaceful atmosphere for restful nights.

Maintenance is straightforward with clear reminders. The system includes a filter replacement indicator that alerts you when the 3-in-1 filter needs attention after approximately 2,200 hours of use. Regular cleaning of the exterior and the air quality sensor ensures longevity and consistent performance. With its sleek design and user-friendly control panel, the Be Cool 24m² Air Purifier stands as a reliable guardian for your home's respiratory health.

M: QW-35-FL

© Copyright 2026 Manual.ly