Manual.ly Logo

Be Cool BC18KL2101F Manual

0.0 · 0 Ratings

PDF manual · 40 Pages

English

M: QW-35-FL
page

/ 40

Loading...
381d4ead319c369bb67529bee54cceda4c92 page f
Seite
15
von
40
WASSERTANK ENTLEEREN
Das Klimagerät hat einen Wasserstand-Sicherheitsschalter, der den Wasserstand regelt.
Sobald der Wasserstand eine gewisse Höhe erreicht, leuchtet die Wasserfüllstandanzeige
auf (Kontrollleuchte W.F auf dem Bedienfeld).
Um den Kondenswasserbehälter zu entleeren, befolgen Sie
folgende Schritte:
Ziehen Sie den Netzstecker aus der Steckdose. Stellen
Sie ein Auffanggefäß unter den Kondenswasserauslass
auf der Rückseite des Gerätes.
Schrauben Sie zunächst die Abdeckung ab und
entfernen vorsichtig den Stöpsel aus dem Auslass.
Lassen Sie das Wasser anschließend in das
Auffanggefäß abfließen. Am Ende können Sie das
Klimagerät leicht neigen - jedoch nicht mehr als 30°.
Sobald der Tank komplett entleert ist, stecken Sie den
Stöpsel wieder sorgfältig in den Wasserauslass und
schrauben die Abdeckung wieder auf.
Stecken Sie den Netzstecker ein und starten Sie das
Gerät wieder neu.
PERMANENTER WASSERABLAUF
Sie haben die Möglichkeit einen permanenten Wasserablauf zu
installieren, um nicht jedes Mal den Wassertank manuell
entleeren zu müssen, wenn Sie vorhaben das Gerät für einen
längeren Zeitraum in Gebrauch zu nehmen (oder die
Wasserpumpe ausfällt.)
Das Gerät verfügt über zwei separate Kondenswasserauslässe
für den Modus ENTFEUCHTEN und den Modus KÜHLEN.
Bitte verwenden Sie den korrekten Wasserauslass für die
permanente Installation. Da die Auslässe auf den jeweiligen
Modus abgestimmt sind.
Um den permanenten Wasserablauf zu installieren, gehen Sie
bitte wie folgt vor:
Bevor Sie einen passenden Wasserablaufschlauch am
jeweiligen Auslass anbringen, muss der Wassertank
komplett entleert sein.
Ziehen Sie den Stöpsel des permanenten
Kondenswasserauslasses ab und bringen den
Wasserablaufschlauch an.
Das andere Ende des Schlauchs stecken Sie in ein
Auffanggefäß oder einen Abfluss, wobei der Schlauch
nicht höher als das Ablaufventil verlegt und nicht
geknickt sein darf.
Wird der permanente Ablauf entfernt, setzen Sie
unbedingt wieder den Stöpsel wieder sorgfältig ein.
HINWEIS:
Sie können auch beide Schläuche auf einmal anbringen, falls
Sie diese nicht beim Wechseln der Modi umstecken wollen.
Für einen permanenten
Wasserablauf benötigen
Sie einen
Wasserabluftschlauch mit
folgenden Maßen:
16mmx1m
(Nicht im Lieferumfang
enthalten)
Kondenswasserauslass
Permanenter
Wasserauslass
für
Entfeuchtungs-
modus
Permanenter
Wasserauslass
für Kühlmodus

Chat with your Be Cool BC18KL2101F manual using AI

Get instant AI answers from your Be Cool BC18KL2101F manual

Ask anything about the Be Cool BC18KL2101F. Answers come from this manual, with the pages they are based on.

BC18KL2101F Maintenance Schedule

Weekly
Clean the air filter

Remove filters from inlet grilles. Vacuum dust or wash with warm water (max 40C) and neutral detergent if dirty. Dry thoroughly before reinstalling.

Show in the manual (page 14)
As needed
Empty the condensate water tank

When the full indicator lights up, unplug device, place container under drain, remove plug, and tilt slightly (max 30 degrees) to empty.

Show in the manual (page 15)
End of season
Dry out internal components

Run the unit in fan mode for 2 hours until completely dry inside to prevent mold and damage during storage.

Show in the manual (page 16)
End of season
Clean filter and store accessories

Clean the air filter, let it dry, reinsert it, remove exhaust hose and remote batteries, and pack the unit for cool, dry storage.

Show in the manual (page 16)
Start of season
Inspect power cord and grounding

Check that the power cable and outlet are intact and properly grounded. Ensure the drain plug is sealed and filters are installed.

Show in the manual (page 16)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend BC18KL2101F?

Yes No

Frequently Asked Questions

A

To ensure the best performance and air quality, you should clean the air filters at least once every week of operation. If the filters become heavily soiled, rinse them in warm water with neutral detergent and let them dry completely before reinstalling.

Is this answer helpful?

A

No, the Be Cool BC1.KL2101F is strictly designed for indoor use only. Using it outdoors can lead to water damage, electrical hazards, and voids the warranty. It must be used in enclosed spaces like living rooms or bedrooms.

Is this answer helpful?

A

The E2 error code indicates that the internal water tank is full. The unit will stop cooling to prevent overflow. You need to empty the water tank using the drain plug located on the back of the unit until the error clears.

Is this answer helpful?

A

Yes, the Sleep mode is designed for energy efficiency and comfort. During the night, it gradually increases the set temperature by 1°C after one hour and another 1°C after two hours, reducing compressor workload while maintaining a comfortable environment.

Is this answer helpful?

A

Yes, the device features separate permanent condensation water outlets for both Cooling and Dehumidification modes. You can connect a 16mm hose to these outlets to continuously drain water without needing to manually empty the tank.

Is this answer helpful?

A

For optimal comfort and energy savings during summer, it is recommended to set the room temperature between 24°C and 27°C. Avoid setting the temperature significantly lower than the outdoor temperature to prevent excessive strain on the unit.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Powerful 5.0kW cooling capacity suitable for medium-sized rooms
  • Eco-friendly R290 refrigerant meets environmental regulations
  • Multiple operating modes including Auto, Cool, Dehumidify, and Fan
  • Convenient timer function allows scheduling up to 24 hours in advance
  • Easy-to-clean washable air filters promote long-term efficiency
VS

Disadvantages

  • Requires installation of an exhaust hose through a window or wall
  • Noise level of 65dB may be noticeable in quiet environments
  • Manual water tank drainage needed if permanent drain is not installed
  • Not suitable for continuous precision cooling in server rooms
  • Requires a grounded electrical outlet for safe operation
M: QW-35-FL

Product Specification

Fan function

3 fan speeds

Refrigerant

R290

Installation type

freestanding

Package contents

Remote control, exhaust hose 4.92 ft, window kit, hose adapter, adapter

M: QW-35-FL

Product Description

Experience Ultimate Comfort with the Be Cool BC1.KL2101F

The Be Cool BC1.KL2101F represents a significant leap in personal climate control, designed to transform your living space into a sanctuary of coolness and comfort. This mobile air conditioning unit is engineered for households seeking effective temperature regulation without the complexity of permanent installations. Whether you are battling sweltering summer heat or managing humidity during rainy seasons, this device delivers reliable performance with a powerful cooling capacity of 5.0kW.

At the heart of its operation lies the eco-friendly R290 refrigerant, which ensures efficient cooling while adhering to modern environmental standards. The unit features a versatile control panel and a comprehensive remote control, allowing you to switch effortlessly between Cooling, Dehumidification, Fan, and Auto modes. The Auto mode intelligently adjusts settings based on the current room temperature, optimizing energy usage without requiring constant manual intervention. For those who value convenience, the built-in timer function allows you to schedule operations up to 24 hours in advance, ensuring your home is perfectly conditioned when you arrive.

Installation is straightforward, utilizing a simple window kit that includes an exhaust hose and adapters to vent hot air outside. The design incorporates safety features such as a water-full indicator and automatic shutdown if the tank reaches capacity, preventing overflow issues. Maintenance is equally user-friendly, with washable air filters that should be cleaned weekly to ensure optimal airflow and efficiency. The unit also offers a Sleep mode that gradually adjusts the temperature for comfortable overnight cooling, reducing noise and energy consumption while you rest.

Built with durability in mind, the BC1.KL2101F sits on sturdy castors for easy mobility between rooms. Its compact yet robust frame fits seamlessly into various interior decors while providing substantial air circulation of 450 cubic meters per hour. By choosing this model, you invest in a solution that balances power, efficiency, and ease of use, making it an essential appliance for modern living.

Important Notes

  • Always allow the unit to stand upright for at least two hours before initial use.
  • Ensure the exhaust hose is kept as short and straight as possible for maximum efficiency.
  • Never operate the device near open flames or ignition sources due to the flammable refrigerant.
  • Clean the air filter regularly to maintain performance and prevent odors.
M: QW-35-FL

© Copyright 2026 Manual.ly