Manual.ly Logo

Be Cool 2-in-1 Stand and Table Fan Manual

0.0 · 0 Ratings

PDF manual · 13 Pages

English

M: gpt-5.6-terra
page

/ 13

Loading...
eff551203704087d79aac24f9e3569a3568c page 8
Seite 8 von 13
PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE STARTING
INSTALLATION, OPERATION OR MAINTENANCE. PROTECT YOURSELF AND
OTHERS BY FOLLOWING THE SAFETY INSTRUCTIONS. FAILURE TO FOLLOW THE
INSTRUCTIONS MAY LEAD TO INJURY OR DAMAGE TO PERSONS AND/OR
PROPERTY AND/OR INVALIDATE THE WARRANTY!
IMPORTANT INFORMATION ON SAFETY, LOCATION AND
ELETRICAL CONNECTION.
1. Use this device exclusively in accordance with the guidelines in the instruction
manual. Any use other than that recommended by the manufacturer, may result in
fire, electrical shock or injury to persons.
●
2. Remove the packaging and ensure the device is not damaged. In case of any doubt
do not use the device and contact the service point or your dealer.
3. Keep packaging material out of the reach of children. There is a risk of choking if
swallowed!
4. If the power cable is damaged it must be replaced by the manufacturer or an
authorised service point, in order to avoid all potential risks.
●
5. Before connecting to the mains power supply, you must check if the type of mains
current and voltage comply with the details given on the rating plate of the
device.
6. The electrical plug socket, into which the device is connected, must not be defective
or loose, must be suitable for the required current load and, above all, must be
properly earthed.
7. Avoid the use of an extension cable, as this may overheat and cause a fire.
8. It is strictly forbidden to modify the properties of this device in any form or manner
and you must only use replacement parts or accessories recommended by the
manufacturer (failure to do so will invalidate the warranty and guarantee).
9. If the device has a defect, switch it off and contact your dealer or the customer hotline.
10. For any possible repairs to the device and the mains plug or power cable you must
always refer exclusively to the customer service points recommended by the
manufacturer. You can view our customer service points online at www.becool.at.
●
11. Children under the age of 8 and persons with limited physical, psychological, sensory
or mental abilities and lack of experience and knowledge may only use this device
under appropriate supervision and if comprehensively briefed on the safe use of the
device and the associated hazards.
12. Do not use the device without supervision. Always switch the device off when
leaving the room.
13. Children must not be allowed to play with the device.
●
14. Do not twist or kink the power cable.
15. Do not use the device with wet hands.
16. Do not use the device outdoors.
17. Never use the device in rooms in which gas, oil or sulphur are present.
18. Do not use the device in the proximity of water or strong moisture, e.g. in damp
cellars, close to pools, bathtubs or showers. Make sure no water can enter the device.

Chat with your Be Cool 2-in-1 Stand and Table Fan manual using AI

Get instant AI answers from your Be Cool 2-in-1 Stand and Table Fan manual

Ask anything about the Be Cool 2-in-1 Stand and Table Fan. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend 2-in-1 Stand and Table Fan?

Yes No

Frequently Asked Questions

A

It can be assembled as a taller pedestal fan or set up in a more compact table-fan format by using the support sections to suit the desired height.

Is this answer helpful?

A

The fan has three airflow settings: low, medium, and high. It also has an off position for stopping operation.

Is this answer helpful?

A

Yes. An oscillation control is included, allowing the fan to move side to side and spread airflow across a broader area.

Is this answer helpful?

A

The fan operates at 220-240 V and 50 Hz, has a rated input power of 50 W, a stated noise level of 60 dB(A), dimensions of 390 x 390 x 1250 mm, and a weight of 5.4 kg.

Is this answer helpful?

A

No. It is intended for indoor use in dry locations. Keep it away from pools, bathtubs, showers, damp cellars, and outdoor conditions.

Is this answer helpful?

A

Unplug it first. Wipe the exterior, cable, and plug with a dry cloth. A lightly damp cloth may be used for heavier dirt, then dry the fan carefully. Do not immerse it or use harsh cleaners.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • 2-in-1 format supports pedestal-height or more compact table-style placement.
  • Three speed settings make it easy to match airflow to changing comfort needs.
  • Oscillation distributes air across a wider section of the room.
  • 40 cm fan head and 50 W input provide practical household cooling performance.
  • Protective front and rear grills support safer everyday use.
VS

Disadvantages

  • The stated 60 dB(A) noise level may be noticeable in quiet rooms.
  • Designed for indoor use only and must be kept away from moisture.
  • Assembly is required before first use.
  • No timer, remote control, or electronic display is specified.
  • At 5.4 kg, it is less convenient to move than a lightweight mini fan.
M: gpt-5.6-terra

Product Specification

Operating mode

Mains operation (50 W)

Color

black

Speed settings

3

Blade diameter

15.75 in

Oscillation range

horizontal oscillation (can be switched off)

Tilt angle

adjustable

Airflow

1,827 CFM

Features

height-adjustable

Noise level

60 dB(A)

M: gpt-5.6-terra

Product Description

Be Cool 2-in-1 Pedestal Fan/Table Fan 40cm black - Read, Download & Print Free

The Be Cool 2-in-1 Pedestal Fan/Table Fan 40cm black is designed to bring flexible airflow to bedrooms, living spaces, home offices, and other indoor rooms. Its adaptable construction allows it to be used as a full-height pedestal fan or in a more compact table-fan arrangement, helping users adjust the setup to suit the space. Finished in black, it offers a straightforward, practical look that fits easily into many interiors.

Flexible cooling for everyday comfort

A 40 cm fan head provides broad air circulation, while three selectable speed settings let users choose a gentler breeze, balanced airflow, or stronger cooling. The controls include positions for low, medium, and high speed, plus an off setting. This makes the fan suitable for different times of day, from quiet personal cooling while working to increased airflow during warmer afternoons.

The fan also includes an oscillation function. When activated, the fan head moves from side to side to distribute air across a wider area instead of focusing on one fixed direction. This can make shared rooms more comfortable and reduce the need to reposition the unit frequently.

Stable design and practical specifications

The pedestal configuration uses a base, support tubes, and securing screws to create a stable standing setup. The protective front and rear grills surround the blades to help prevent accidental contact during normal operation. With a rated power input of 50 W, 220-240 V operation, and a stated noise level of 60 dB(A), the unit is built for regular indoor household use.

Its maximum assembled dimensions are approximately 390 x 390 x 1250 mm, and it weighs 5.4 kg. These measurements provide a useful balance between a substantial base footprint and a fan height that can direct air across seating, desks, or beds. The detachable support sections are central to the 2-in-1 concept, allowing a lower arrangement when a tall pedestal fan is not required.

Care and safe operation

Place the fan on a stable, level surface and keep the air intake and outlet clear. It should be used indoors only, away from water, heavy moisture, flammable gases, oil, and sulphur. Always switch it off before unplugging, moving, or cleaning it. Cleaning is simple: wipe the exterior with a dry cloth, or use a lightly damp cloth followed by careful drying. Avoid abrasive products, solvents, benzene, and oil-based cleaners.

Notes

  • Check that the local power supply matches the rating label before use.
  • Do not operate the fan unattended or with damaged cable components.
  • Keep fingers and objects away from the grills and blades.
  • Regularly inspect visible screw connections to support stable operation.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly