Manual.ly Logo

Bartscher Snack I Manual

0.0 · 0 Ratings

PDF manual · 21 Pages

English

M: QW-35-FL
page

/ 21

Loading...
aa0c780817d74a105678ed55a0f46fb58422 page 12
- 37 -
Pouring out and removing frying oil/ liquid fat
• Regularly change the frying oil/fat.
• Frying oil/fat should be removed as soon as it starts turning brown.
• After the device has cooled off, carefully take out the basin with stale frying
oil/fat. Pour the oil/fat to the container and dispose of it in environmentally
friendly manner.
• If the fat in blocks hardens in the fryer, you can melt it only when setting the
temperature controller in the position marked for the melting point, and then
it can be poured out to the appropriate container. Make sure the container for
drained oil is positioned securely.
NOTE!
Stale frying oil / fat should be disposed of in an environmentally friendly
manner and according to the valid local regulations.
Overheating protection
• In case of accidental engaging of the fryer without frying oil/fat in the basin or without
sufficient amount of frying oil/fat in the basin, the device automatically shuts down
after reaching the temperature of ca. 230 °C. Whene ver this occurs, pull the plug.
Leave the device to cool off.
After the device has been switched off by the overheating protection mechanism, it
can only be restarted by pressing the RESET button at the rear of the device.
For this purpose, cool the device to less than 170 °C,
then unscrew the plastic plug of the RESET button
counter-clockwise, press the peg and again screw the
plug turning it clockwise.
Next, reconnect the power plug to the socket and start
operating the device normally,
RESET button

Chat with your Bartscher Snack I manual using AI

Get instant AI answers from your Bartscher Snack I manual

Ask anything about the Bartscher Snack I. Answers come from this manual, with the pages they are based on.

Snack I Maintenance Schedule

Regularly
Inspect the power cable for damage

Check the cable regularly. Never use the device if damaged. Replace only via authorized service or qualified electrician.

After each use
Clean the device components

Disconnect power and cool down. Clean basket, basin, lid with warm water and mild agent. Wipe exterior and control panel with moist cloth.

Show in the manual (page 19)
As needed
Change frying oil or fat

Replace oil when it turns brown or loses suitability. Pour out cooled oil into a container for environmentally friendly disposal.

Show in the manual (page 18)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Snack I?

Yes No

Frequently Asked Questions

A

Wait until the device cools below 170°C. Unscrew the plastic plug on the RESET button at the rear, press the peg, screw the plug back in clockwise, then reconnect power and restart.

Is this answer helpful?

A

No, the device is designed for indoor use only. Operating it outdoors exposes it to weather conditions that could damage the electrical components and create safety hazards.

Is this answer helpful?

A

For the 4-liter single basin model, the maximum recommended quantity is 0.6 kg of food products to ensure optimal frying results and prevent oil temperature drop.

Is this answer helpful?

A

Absolutely not. The control box must never be immersed in water or placed in a dishwasher. Clean it only with a moist cloth and mild detergent.

Is this answer helpful?

A

You should change the oil regularly, specifically removing it as soon as it starts turning brown to maintain food quality and safety.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Stainless steel body ensures high durability and resistance to corrosion
  • Precise temperature control range from 50°C to 190°C offers versatile cooking options
  • Overheating protection mechanism automatically shuts down the device to prevent fires
  • Clear and detailed instruction manual simplifies setup and daily operation
  • Compact design fits well in various kitchen environments with limited space
VS

Disadvantages

  • Requires a dedicated 16A electrical socket which may not be available everywhere
  • Control box cannot be submerged in water, requiring careful cleaning procedures
  • Frying capacity is limited to 4 liters per basin, restricting volume for large batches
  • Device must cool down completely before cleaning to avoid burn injuries
  • Single basin model limits simultaneous frying compared to double units
M: QW-35-FL

Product Specification

Power

2000W

Color

stainless steel

Capacity

2.4 l

Oil Capacity

4 l

Temperature Settings

yes

Temperature Range

122-374°F

Dimensions

8.5x12.2x22.2 in (WxDxH)

M: QW-35-FL

Product Description

Discover the Bartscher Snack I Friteuse Manual: Your Guide to Perfect Frying

The Bartscher Snack I Friteuse Manual represents more than just a set of instructions; it is a comprehensive resource for anyone looking to master the art of deep frying in a professional or semi-professional kitchen. This specific model, identified by code A162410E, is designed with safety and efficiency as its core pillars. The manual guides users through every step of the process, from initial unpacking to the final cleaning, ensuring that the device operates at peak performance while maintaining the highest safety standards.

At the heart of the Bartscher Snack I is its robust stainless steel construction, which ensures durability and easy maintenance. Whether you are frying delicate fish or hearty chips, the precise temperature control ranging from 50°C to 190°C allows for versatile cooking options. The manual emphasizes the importance of proper installation, warning users to place the unit on a stable, heat-resistant surface away from flammable materials. It details the electrical requirements, specifying a 230V connection with a 16A circuit breaker to prevent any electrical hazards.

Safety is paramount throughout the document. The guide highlights critical warnings regarding hot surfaces, oil splashes, and the risk of fire if the oil level drops below the minimum mark. Users are instructed never to leave the device unattended during operation and to strictly follow the protocols for handling fat blocks versus liquid oil. The manual also provides clear troubleshooting steps for common issues like overheating protection activation, empowering users to resolve minor problems without immediate technical assistance.

Cleaning and maintenance are presented as straightforward tasks when following the provided guidelines. The text advises against using abrasive cleaners or submerging the control box in water, promoting gentle cleaning methods to preserve the equipment's longevity. By adhering to these instructions, owners can ensure their Bartscher Snack I remains a reliable workhorse for years, delivering consistent results batch after batch.

M: QW-35-FL

© Copyright 2026 Manual.ly