Bartscher Imbiss I Manual
PDF manual · 21 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Bartscher Imbiss I manual using AI
Get instant AI answers from your Bartscher Imbiss I manual
Ask anything about the Bartscher Imbiss I. Answers come from this manual, with the pages they are based on.
Imbiss I Maintenance Schedule
Remove stale oil when it turns brown or after cooling. Pour into appropriate container and dispose according to regulations.
Clean basin, lid, basket, heating element, and exterior with mild agent. Ensure no water enters electrical parts.
Check cable for damage regularly. Do not use if damaged; replace only by authorized service center.
Ask a Question
Do you recommend Imbiss I?
Yes NoFrequently Asked Questions
It is designed for frying appropriate foods only. The manual explicitly forbids using the fryer for heating foods and liquids or any purpose beyond intended frying use.
Is this answer helpful?
The temperature control range is 50 C to 190 C. The thermostat regulates the oil temperature; the orange heating indicator comes on when the oil temperature drops below the set value.
Is this answer helpful?
Remove the basket and heating element shield, place fat blocks directly on the heating element so they are fully covered, set the temperature dial to the melting point position, and wait for melting. When the fat becomes liquid, switch to the maximum temperature and carefully remount the shield.
Is this answer helpful?
Never start the fryer without oil or fat in the basin. The level must stay between the MIN and MAX marks. Below MIN increases fire risk, while above MAX can cause boiling and dangerous splashes.
Is this answer helpful?
Overheating protection automatically shuts down after reaching about 230 C. Switch the fryer off, pull the plug, cool the unit, then restart only by pressing the RESET mechanism after cooling to below about 170 C.
Is this answer helpful?
No. The device is not suited for direct washing with water, and pressure water jets are not allowed. Keep water away from the control box and ensure the unit is fully cooled and unplugged before cleaning.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Thermostat temperature control from 50 C to 190 C supports consistent frying results.
- Orange heating indicator and green power indicator provide clear operating status.
- Overheating protection shuts down near 230 C and supports safer accidental start behavior.
- Oil drain tap and removable parts help with oil changes and regular cleaning.
- Designed for frying foods with safeguards against wrong use and hazards.
Disadvantages
- Indoor use only and not suitable for outdoor or humid/wet environments.
- No external timer or remote control support; operation is manual.
- Burn and fire risks require strict attention to oil level, drying, and safe handling.
- Control box must stay dry; direct water jet cleaning is not allowed.
- Avoid heating liquids; the fryer is intended only for appropriate frying foods.
Product Specification
Power
3250W
Color
stainless steel
Oil capacity
8.45 qt
Dimensions
11.42x16.14x24.80in (WxHxD)
Product Description
Bartscher Snack I Deep Fryer Manual
Built for busy snack counters
The Bartscher Snack I Deep Fryer is a compact deep fat fryer designed for frying appropriate foods in a professional, everyday setting. With a single deep-drawn basin and a dedicated oil drain tap, it is a practical choice for operators who need consistent results and straightforward service routines. If you are following the Bartscher Snack I Deep Fryer Manual, you will see that the unit is intended for indoor use only and for frying foods, not for heating liquids or other unintended applications.
Frying performance and temperature control
This fryer features an adjustable temperature control range from 50 C to 190 C, regulated by a thermostat so the oil temperature is maintained during continuous use. Indicator lights provide clear feedback: the green power indicator shows readiness, and the orange heating indicator tracks the heating process until the set temperature is reached. A heating element shield and a control box that is properly secured to the body help support safe operation while you melt fat, heat oil, and fry.
Safety-first operation
Operation requires careful attention to safety instructions. The device is protected against overheating if it is accidentally engaged without enough oil or fat; in that event, it shuts down around 230 C and can be restarted only after cooling and using the RESET function. The manual emphasizes burn prevention: the surfaces and oil stay hot after switching off, and splashes can cause injuries. It also warns against water intrusion into the control box and against cleaning the device with direct water jets.
Cleaning, oil handling, and maintenance notes
Regular oil changes are recommended as the oil darkens and turns brown. After cooling, oil can be drained using the oil drain tap into an appropriate container, then disposed of according to local environmental rules. For cleaning, remove the basket and detach the control box carefully; the heating element can be wiped with a mild agent, while the control box must not be wet cleaned or immersed.
Key takeaways (most important results)
- Thermostat control keeps oil at 50 C to 190 C with clear heating and power indicators.
- Overheating protection automatically shuts down to reduce risk during incorrect operation.
- Oil drain tap and removable components simplify draining, cleaning, and routine servicing.
- Correct installation and indoor-only use are required for safe, reliable frying.
Notes
- Use only oil or fat suitable for high-temperature cooking and do not mix different types.
- Never start the fryer without oil/fat in the basin between MIN and MAX.
- Do not operate the fryer with the lid; the lid is dust protection and temperature support only.
Search for 67,706 Manuals online
Type-in Brand or Model