Manual.ly Logo

Bartscher Ice Crusher Manual

0.0 · 0 Ratings

PDF manual · 15 Pages

English

M: QW-35-FL
page

/ 15

Loading...
e29128ec99ada1d10e981c357d0596fb7942 page e
- 27 -
When the crushing process finishes remove the collection tray. The contact switch is
thus automatically deactivated and the ice crusher will stop crushing.
If the glass lid catch is now released, the glass lid will return to its primary position and
the contact switch is automatically disconnected.
The device is equipped with an overheating protection device which deactivates
the motor if normal operating temperatures have been exceeded. In this event the
device should be left to cool as long as is necessary. The device can then again be
used for crushing ice.
Disconnect the device from its power source (remove the plug!) when not in use.
6. Cleaning
WARNING!
Before cleaning disconnect the device from the power
supply (pull the plug!).
Do not use any kind of pressure water jet for cleaning
the device.
Protect the device from the water penetration.
CAUTION!
Never use steel wool for cleaning. Its particles may loosen and get mixed
with the crushed ice in a beverage.
Never use sharp or scouring cleaning agents which may scratch the
surface of the device.
Never use aggressive cleaning agents of sprays.
o Clean the device after every use, as well as after longer intervals between uses.
o The device should be cleaned after each use, as well as after a long period of being
unused.
o Remove the collection tray and water tray, and clean them.
o Clean the collection tray with a mild cleaning agent and rinse thoroughly in clean
water. Replace it in its original position.
o The water tray should be cleaned with a soft cloth, then replaced under the container
for crushed ice.
o Open the filling chute and clean the inside with a brush and diluted cleaning agent.
Repeat the process 2-3 times.

Chat with your Bartscher Ice Crusher manual using AI

Get instant AI answers from your Bartscher Ice Crusher manual

Ask anything about the Bartscher Ice Crusher. Answers come from this manual, with the pages they are based on.

Ice Crusher Maintenance Schedule

After every use
Clean the device

Disconnect power. Remove and empty the collection container and water tray. Clean them with mild detergent or soft cloth. Brush the interior of the feed chute.

Show in the manual (page 14)
Regularly
Inspect the power cord

Check the power cord regularly for damage. Do not use the device if the cord is damaged. Have it replaced by qualified service personnel.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Ice Crusher?

Yes No

Frequently Asked Questions

A

The device is designed to crush ice cubes produced by an ice machine, with a maximum dimension of 40 x 40 x 40 mm. Freezer ice cubes should not be used as they may damage the blades.

Is this answer helpful?

A

This electric ice crusher has a maximum production capacity of 60 kilograms of crushed ice per hour, making it suitable for high-volume commercial kitchens and bars.

Is this answer helpful?

A

Yes, it features two automatic safety switches. The machine will only operate when the collection tray is fully inserted and the glass lid is pressed down, preventing access to moving parts.

Is this answer helpful?

A

No, you must never use a pressure water jet. Water penetration can cause electrical hazards. Clean with a soft, moist cloth and mild cleaning agents instead.

Is this answer helpful?

A

If the device stops due to overheating, turn it off and let it cool down completely. If it malfunctions otherwise, disconnect the power and contact a qualified technician.

Is this answer helpful?

A

No, the warranty expires immediately if the device is modified, altered, or repaired with non-original parts by anyone other than an authorized service provider.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High production capacity of up to 60 kg of ice per hour for efficient service
  • Dual safety switches prevent operation when trays or lids are not secured
  • Durable stainless steel construction ensures long-term reliability and hygiene
  • Overheating protection system safeguards the motor during extended use
  • Removable collection and water trays simplify cleaning and maintenance
VS

Disadvantages

  • Requires specific ice cube sizes (max 40mm) limiting flexibility with large chunks
  • Must be operated only indoors in dry conditions restricting outdoor use
  • Power cord must remain fully unrolled preventing cable management options
  • Initial batch of ice must be discarded after cleaning due to potential chemical traces
  • Repairs require qualified technicians using original spare parts only
M: QW-35-FL

Product Specification

Operating Mode

Mains operation (60W)

Color

stainless steel

Capacity

1 qt

M: QW-35-FL

Product Description

Elevate Your Beverage Service with the Bartscher Stainless Steel Electric Ice Crusher

The Bartscher Stainless Steel Electric Ice Crusher Manual serves as a comprehensive guide for professionals seeking efficiency and safety in their kitchen operations. This robust machine is engineered specifically for commercial environments, ensuring that bars, restaurants, and catering services can produce perfectly crushed ice with minimal effort. Constructed from high-grade stainless steel, the unit not only withstands the rigors of daily use but also maintains a sleek, hygienic appearance that complements any modern workspace.

Designed with user safety in mind, the crusher features dual safety switches that prevent operation unless the collection tray is securely inserted and the glass lid is properly closed. This intelligent design minimizes the risk of accidental activation while protecting users from moving parts. The device boasts an impressive production capacity of up to 60 kg of ice per hour, powered by a reliable 0.06 kW motor running on standard 230V power. Its compact dimensions allow it to fit seamlessly into busy workstations without consuming excessive counter space.

Operation is straightforward yet requires adherence to specific protocols outlined in the manual. Users must ensure that only ice cubes produced by an ice machine are used, avoiding freezer-blasted ice which may damage the blades. The filling chute is designed to accommodate cubes no larger than 40mm, ensuring smooth processing. An integrated overheating protection system automatically deactivates the motor if temperatures rise too high, safeguarding the longevity of the equipment.

Cleaning and maintenance are simplified by removable components, including the collection tray and water tray. Regular cleaning with mild agents and soft cloths keeps the stainless steel surface pristine and prevents limescale buildup. For optimal hygiene, the first batch of crushed ice should always be discarded after initial setup or cleaning to remove any manufacturing residues.

Important Notes

  • Always disconnect the device from power before cleaning or maintenance.
  • Do not use sharp objects or abrasive materials on the stainless steel surfaces.
  • Ensure the device is placed on a stable, level surface away from heat sources.
M: QW-35-FL

© Copyright 2026 Manual.ly