Manual.ly Logo

Bartscher Hot Water Dispenser Manual

0.0 · 0 Ratings

PDF manual · 19 Pages

English

M: QW-35-FL
page

/ 19

Loading...
bee29d7d09678a3b03bef26d4f7febe44a14 page 12
- 35 -
Descaling
CAUTION!
Failure to conduct regular descaling - in accordance with the
instructions - may be the basis for rejecting complaints.
The warranty does not cover this type of complaint!
Descale the device regularly!
o Hard water may cause scaling in the water tank, thus extending the time needed to
heat water and possibly causing damage of the device. If possible, use filtered
water to avoid scaling!
o We recommend using citric acid or vinegar for ecological descaling. Prepare a
solution of water with vinegar (3:1 ratio) or water with citric acid (2 table
spoons per 1 liter of water) and fill the tank. Wait some time (ca. 1 hour), and
then boil the solution.
o Wait for the device to cool off.
o After cooling, pour out the descaling solution and rinse the tank several times with
clean water. Drain the clean water through the drain tap to thoroughly remove all
scaling solution leftovers.
o Follow manufacturer’s instructions if you choose to use other commercially available
descaling products.
Storing of the device
o If the device is not used for a longer time, clean it thoroughly according to the
instructions above and store it in a dry, clean place, protected from cold, sunlight,
and children. Do not place any heavy objects on the device.

Chat with your Bartscher Hot Water Dispenser manual using AI

Get instant AI answers from your Bartscher Hot Water Dispenser manual

Ask anything about the Bartscher Hot Water Dispenser. Answers come from this manual, with the pages they are based on.

Hot Water Dispenser Maintenance Schedule

After every use
Clean the water tank and tap

Clean the inside of the water tank with mild detergent and rinse. Flush fresh water through the tap to clean it.

Show in the manual (page 17)
Regularly
Descale the device

Use a vinegar-water (3:1) or citric acid solution. Let it sit for about 1 hour, boil, cool, then rinse thoroughly.

Show in the manual (page 18)
Regularly
Disinfect the water tank

Completely empty, clean, and disinfect the water tank at regular intervals to prevent harmful bacteria growth.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Hot Water Dispenser?

Yes No

Frequently Asked Questions

A

Mix a solution of water and vinegar in a 3:1 ratio or use two tablespoons of citric acid per liter of water. Fill the tank, let it sit for an hour, then boil the solution. After cooling, drain and rinse thoroughly with clean water.

Is this answer helpful?

A

While the unit has a safety thermostat, it is recommended to turn off the switch and unplug the device when not in use for extended periods to save energy and ensure safety.

Is this answer helpful?

A

The temperature range is adjustable from 30 degrees Celsius up to 100 degrees Celsius using the mechanical control knob located on the front panel.

Is this answer helpful?

A

No, the water tank and all other parts of the dispenser must never be washed in a dishwasher. Clean them manually with gentle agents and warm water.

Is this answer helpful?

A

The built-in safety thermostat will automatically switch off the device to prevent damage. You must disconnect the power, allow it to cool, refill with water, and then restart.

Is this answer helpful?

A

To eliminate harmful germs, the water tank should be regularly emptied and disinfected according to your usage frequency and local health regulations.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Stepless temperature control allows precise settings for different beverages
  • Integrated safety thermostat prevents dry boiling and overheating hazards
  • Large 6-liter capacity reduces refill frequency during busy service hours
  • Stainless steel construction ensures durability and easy surface cleaning
VS

Disadvantages

  • Manual operation requires constant monitoring of water levels and switches
  • No digital display makes reading exact current temperature difficult
  • Unit must be cooled down completely before safe handling or cleaning
  • Requires strict adherence to descaling schedules to prevent limescale damage
M: QW-35-FL

Product Specification

Power

1800 W

Color

stainless steel, black

Capacity

6 L

Temperature settings

stepless

Temperature range

max. 212 F

M: QW-35-FL

Product Description

Elevate Your Beverage Station with the Bartscher Hot Water Dispenser 6l Manual

The Bartscher Hot Water Dispenser 6l Manual is a robust solution designed for high-volume environments ranging from commercial kitchens to busy offices. This unit combines stainless steel durability with precise temperature control, ensuring that hot water is always ready when you need it most. Whether you are preparing tea, coffee, or instant soups, this dispenser delivers consistent performance without the wait.

Designed with user safety in mind, the device features a thermostatic mechanical control system that allows you to set temperatures between 30 °C and 100 °C. The integrated safety thermostat automatically cuts power if the tank runs dry or overheats, preventing damage and ensuring long-term reliability. The manual operation style offers straightforward control, making it accessible for all staff members regardless of technical expertise.

Maintenance is simplified with clear instructions for regular cleaning and descaling. Using citric acid or vinegar helps prevent limescale buildup, which can otherwise affect heating efficiency. The unit includes a fill level indicator and an automatic shut-off tap for easy dispensing. Its compact footprint fits easily on counters while providing a generous 6-liter capacity to handle peak demand periods.

Key Features Overview

  • Thermostatic Control: Stepless adjustment from 30 to 100 degrees Celsius.
  • Safety First: Overheating protection and dry-boil prevention mechanisms.
  • Durable Build: Constructed with stainless steel and high-grade plastic components.
  • Energy Efficient: Heats water quickly with a 1.8 kW power rating.

Important Notes

Always ensure the device is unplugged before cleaning or moving. Never immerse the base unit in water. Regular descaling is essential to maintain warranty coverage and optimal heating speed.

M: QW-35-FL

© Copyright 2026 Manual.ly