Manual.ly Logo

Babymoov NutriSmart Manual

0.0 · 0 Ratings

PDF manual · 108 Pages

English

M: OA-GPT-5-NAN
page

/ 108

Loading...
2c87b00e36b0b3a61495f0049382ce47845c page 8
8
12
3
3 sec
15 min 12h
4 - DÉPART DIFFÉRÉ (NON DISPONIBLE EN MODE VOITURE)
• Vous pouvez choisir de retarder la chauffe (15 min, 30 min, 45 min, 1h, 2h… 12h).
• Une fois les étapes de chauffe complétées, le bouton départ différé clignote (7).
• Appuyez sur le bouton départ différé (7).
• Changez le minuteur en pressant les flêches.
• Appuyez OK pour valider. Le départ de chauffe se fera au moment choisi.
• Pour annuler le départ différé et lancer la chauffe immédiatement, appuyez 5 sec sur le bouton départ différé (7).
5 - MAINTIEN AU CHAUD
IMPORTANT : la fonction MAINTIEN AU CHAUD fonctionne uniquement
en mode bain-marie (et n’est pas recommandée en mode voiture).
• S’active automatiquement pendant 1 heure une fois la chauffe terminée.
• Pressez le bouton OK pour suspendre la fonction maintien au chaud.
• Pressez une nouvelle fois le bouton OK pour relancer la fonction maintien au chaud (maintient
la température à 37 °C).
• Une fois le maintien au chaud terminé, le chauffe-biberon se mettra automatiquement en
veille au bout d’une heure.
• Pour désactiver le mode veille, pressez le bouton OK pour que le chauffe-biberon se rallume
et propose le temps de chauffe précédemment utilisé.
Pressez une nouvelle fois le bouton OK, la chauffe du produit se déclenche.
GUIDE D'ENTRETIEN
Nettoyage du chauffe-biberon :
• Attendre que le chauffe-biberon soit froid avant de le nettoyer.
• Débrancher toujours l’appareil avant de le nettoyer.
• Ne jamais plonger l’appareil dans l’eau et ne pas le remplir complètement d’eau.
• Ne pas utiliser de détergent pour nettoyer l’appareil.
• Utiliser un tissu légèrement humide pour nettoyer l’intérieur et l’extérieur.
• Anneau d’adaptation, dosette et panier pour petit pot peuvent passer au lave-vaisselle.
NUTRISMART • Notice d’utilisation

Chat with your Babymoov NutriSmart manual using AI

Get instant AI answers from your Babymoov NutriSmart manual

Ask anything about the Babymoov NutriSmart. Answers come from this manual, with the pages they are based on.

NutriSmart Maintenance Schedule

As needed
Descale the water tank

Mix 100 ml hot water with 100 ml white vinegar, pour into tank, leave for 30 minutes, then empty and wipe clean. The low water indicator lights up when this is needed.

After each use
Clean the exterior and interior

Wait until the unit is cold and unplugged. Wipe inside and outside with a slightly damp cloth. Do not use detergent or immerse the appliance.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend NutriSmart?

Yes No

Frequently Asked Questions

A

The NutriSmart provides two modes: steam heating for bottles and jars (fast), and bain-marie (water bath) for breast milk and defrosting. Bain-marie is gentler but slower and not recommended for car use.

Is this answer helpful?

A

You select heating mode, quantity (60/90/120/180/250 ml or g) and the starting temperature (room 20 °C, refrigerated ~4 °C, frozen ~-18 °C for bain-marie). The NutriSmart automatically calculates the required time and stores the last program for reuse.

Is this answer helpful?

A

Yes—using the supplied cigarette-lighter adapter and with the vehicle engine running. Car mode provides 100 W power but bain-marie is not recommended in the car due to very long heating times.

Is this answer helpful?

A

Unplug and wait for the unit to cool. Do not immerse the base or use detergents; wipe inside and outside with a damp cloth. Descale by mixing 100 ml hot water with 100 ml white vinegar, let sit 30 minutes, empty and wipe clean. Removable adapter ring, measuring cup and basket are dishwasher-safe.

Is this answer helpful?

A

Always ensure sufficient water is in the tank before switching on, use the baskets to heat bottles, remove feeds carefully (they’ll be very hot), shake bottles to mix milk and test a drop on your wrist to confirm safe temperature.

Is this answer helpful?

A

Five beeps signal insufficient water; refill according to the selected mode (steam max 45 ml, bain-marie max 120 ml) and wait ~10 minutes to resume. The low-water indicator also lights when descaling is required.

Is this answer helpful?

A

Yes. At home the unit runs on 220–240 V at 500 W (faster heating). In the car it runs on 12 V DC at 100 W (slower). Minimum heating time is about 1 minute 20 seconds; example full-cycle times vary by quantity and mode.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Dual heating modes (steam and bain-marie) for versatile use with bottles, jars and breastmilk pouches.
  • Automatic time calculation and memory of last program for simplified, repeatable operation.
  • Programmable delayed start (up to 12 hours) and keep-warm function keep feeds ready and at 37 °C.
  • Portable car mode with dedicated cigarette-lighter adapter allows heating on the go (engine running).
  • Clear safety features and maintenance guidance including descaling method and low-water indicator.
VS

Disadvantages

  • Bain-marie heating is slow and not recommended for use in the car.
  • Requires manual water refills and daily water changes to prevent bacterial growth.
  • Glass bottles need 20% shorter heating times, adding a manual adjustment step.
  • Device and heating surfaces become hot; careful handling required when removing feeds.
  • Programming errors can’t be undone—requires restart or long-press reset sequence.
M: OA-GPT-5-NAN

Product Specification

Power

300 W

Color

grey, silver

Warm-up time

80 sec

Features

Display, 12 V connection, stepless temperature control

M: OA-GPT-54-NAN

Product Description

Babymoov NutriSmart Bottle Warmer — Efficient, Smart Feeding Aid

The Babymoov NutriSmart Bottle Warmer is a versatile, compact device designed to heat baby bottles, jars and breast milk pouches quickly and safely at home or on the go. Offering two heating modes (steam and bain-marie), a memory of the last program, programmable delayed start and a keep-warm function, the NutriSmart aims to simplify feeding routines while prioritizing safety and hygiene.

Key features and how it helps

The unit supports multiple bottle sizes (up to 80 mm wide) and works with most bottle and jar types. Steam mode is swift and ideal for bottles and jars; bain-marie mode is recommended for delicate items like breast milk or defrosting. The device automatically estimates heating time based on the chosen mode, quantity (60 / 90 / 120 / 180 / 250 ml/g) and the starting temperature (room, refrigerated, or frozen for bain-marie). Programmable start (up to 12 hours) prepares feeds in advance, while the keep-warm setting maintains 37 °C for up to an hour in bain-marie mode.

Controls are intuitive: arrows to set mode, quantity and temperature, plus an OK button for confirmation. A low-water indicator and audible beeps warn of insufficient water; five beeps prompt refilling and the unit requires about 10 minutes before resuming. The product runs on mains power at home (220–240 V, 500 W) and on 12 V DC in a vehicle (100 W) using a dedicated cigarette-lighter adapter. Car use requires the engine running and warns against using bain-marie in transit due to long heating times.

Safety, maintenance and reliability

Safety guidance stresses supervision with young children, checking water level before operation, avoiding immersion of the electrical base, and verifying feed temperature before serving. The manual explains descaling with a 1:1 hot water/white vinegar solution when limescale accumulates; the low-water indicator lights when descaling is needed. Regular water changes (every 24 hours) and following the device’s drainage and cleaning instructions help prevent bacterial growth.

Overall, NutriSmart blends speed, programmability and practical safety features for modern parenting needs. It’s engineered for everyday domestic environments with thoughtful features for travel, careful temperature control, and easy cleaning of removable parts.

Notes

  • Use only the supplied car adapter for vehicle use and keep the engine running while operating the unit in a car.
  • If using glass bottles, reduce recommended times by about 20% to avoid overheating.
  • Never heat feeds without sufficient water in the tank; refill per mode markings (45 ml for steam, 120 ml for bain-marie).
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly