Manual.ly Logo

BaByliss Pro FX8700E Manual

0.0 · 0 Ratings

PDF manual · 64 Pages

English

M: QW-35-FL
page

/ 64

Loading...
8b9075ea3a48715cb2936f439c87e86dca38 page 7
7
IMPORTANT: Do not use the
clipper in this mode for more than
20 minutes.
Replacement (removal) of blade
set
1/ Unplug the unit and adjust the
taper (see illustration A).
2/ Remove the screws and the
xed blade. Save the screws.
3/ Lift o the small moving blade
and replace it with the new one
on the plastic oscillator (see
illustration B).
4/ Replace the xed blade using
the screws and lightly tighten
them. Adjust the teeth as shown
in illustration C, to a gap of 1mm
to 1.5mm and the small, moving
blade as centered and parallel as
possible to the xed blade’s teeth.
IMPORTANT NOTE:
Be sure to add a few drops of
BaBylissPRO lubricating oil to the
blades before running.
Don’t forget to tighten the screws
after the blades have been
aligned.
Cleaning & Maintenance
• To maintain optimum
performance, the appliance
should be cleaned after each use.
• Blow away any remaining hair on
the blades or use the cleaning
brush provided.
• Remove the comb guide. The
comb guide can be rinsed under
running water. Ensure they are
dried thoroughly before storage
or further use.
• Oil the blades after every use
to ensure optimum cutting
performance.
CONTAINS LITHIUM ION
BATTERY. MUST BE COLLECTED,
RECYCLED OR DISPOSED OF
PROPERLY. DO NOT DISPOSE OF
IN THE GARBAGE.
A.
B.
Taper
Plastic
Oscillator
Small
Moving
Blade
1mm to
1.5mm
C.
Small`
Moving
Blade
Fixed blade
C.

Chat with your BaByliss Pro FX8700E manual using AI

Get instant AI answers from your BaByliss Pro FX8700E manual

Ask anything about the BaByliss Pro FX8700E. Answers come from this manual, with the pages they are based on.

FX8700E Maintenance Schedule

Remind me when maintenance is due
Every 3 months
Recharge the battery for 3 hours

To maintain optimum capacity of the rechargeable batteries, the appliance should be recharged for 3 hours approximately every 3 months.

After every use
Clean the clipper blades and comb guides

Blow away hair or use the cleaning brush. Rinse comb guides under running water and ensure they are thoroughly dry before storage.

After every use
Oil the clipper blades

Apply 2 drops of lubricating oil directly onto the blades while running to maintain optimal cutting performance.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend FX8700E?

Yes No

Frequently Asked Questions

A

You must charge the device continuously for three hours before using it for the first time. Note that the battery will only reach its maximum capacity after three complete charge and discharge cycles.

Is this answer helpful?

A

A rapidly flashing red light (more than four times per second) indicates that the appliance is faulty. You should unplug the adapter immediately and contact an authorized service center.

Is this answer helpful?

A

Yes, the clipper can be used while plugged into the wall outlet. Simply connect the adapter to the clipper and then to the power source for continuous operation.

Is this answer helpful?

A

Use the adjustable taper lever located near your thumb. Push the lever up for a shorter cut and push it down slowly for a longer cut. This allows you to vary the length without stopping the machine.

Is this answer helpful?

A

For optimal performance, you should lubricate the blades before, during, and after every single use. Failure to do so may void the warranty and damage the blades.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Ferrari-designed engine ensures high-speed cutting at 6300 rpm
  • Dual power options with 120-minute cordless runtime or direct plug-in
  • Adjustable taper lever allows instant length changes during cutting
VS

Disadvantages

  • Requires strict adherence to blade cleaning and oiling schedules
  • Initial battery capacity takes three full cycles to reach maximum
  • Adapter may become warm during the charging process
M: QW-35-FL

Product Specification

Type

Hair Clipper

Cut Widths

1.77 in

Attachments

8x Comb Attachments

Runtime

2 h

Charging Time

3 h

M: QW-35-FL

Product Description

Discover the BaByliss Pro FX8700 Hair Clipper Manual

The BaByliss Pro FX8700 Hair Clipper is a powerhouse designed for professionals who demand precision and durability. Engineered with Ferrari-designed technology, this clipper delivers consistent performance whether you are working in a busy salon or at home. The manual guides users through every aspect of operation, ensuring that the powerful motor and sharp stainless steel blades work in perfect harmony to deliver flawless cuts.

One of the standout features of the FX8700 is its versatility. It operates cordlessly for up to 120 minutes on a single charge, offering freedom of movement, or can be used plugged directly into the wall via the included adapter. The adjustable taper lever allows barbers to change cutting lengths instantly without stopping, enhancing workflow efficiency. With eight comb attachments included, achieving any desired length is effortless.

Maintenance is key to longevity, and the manual emphasizes regular care. Users must clean and oil the blades before and after every use to prevent rust and ensure smooth cutting action. The LED charging indicator provides clear feedback, glowing red while charging and turning solid when full. A rapidly flashing light signals a fault or low battery, alerting users to potential issues immediately. By following the detailed instructions in the BaByliss Pro FX8700 Hair Clipper Manual, owners can extend the life of their investment and maintain professional-grade results day after day.

M: QW-35-FL

© Copyright 2026 Manual.ly