Manual.ly Logo

BaByliss Pro FX59E Manual

0.0 · 0 Ratings

PDF manual · 60 Pages

English

M: OA-GPT-54-NAN
page

/ 60

Loading...
dc46d8d8b3a063beeb900cd16a0fdc0c02e0 page 3
3
et après chaque utilisation. Cela
assurera une performance de
coupe optimale. Tenir la tondeuse
à l’envers, loin du corps, et déposer
quelques gouttes d’huile lubri-
ante sur le devant et le côté des
lames. Essuyer le surplus à l’aide
d’un linge doux et sec.
Toute autre opération d’entretien
ou de réparation doit être eec-
tuée par un technicien autorisé.
Cet appareil ne contient aucune
pièce pouvant être réparée/rem-
placée par l’utilisateur. Cet appareil
est réservé à l’usage professionnel.
Remplacement (retrait)
des lames
Vérier que l’interrupteur est sur
« 0-OFF ». Placer le pouce sous la
petite lame et pousser vers l’avant
pour dégager le jeu de lames du
boitier. Installer le jeu de lames
de remplacement sur la tête de
coupe, puis appuyer sur la grande
lame avec le pouce pour xer.
Prendre garde de ne pas utiliser
trop d’huile et de ne pas lubrier
l’appareil plus que nécessaire ; cela
pourrait endommager le moteur.
Ne pas essayer de lubrier les rou-
lements du moteur qui sont déjà
lubriés à vie.
Nettoyage des lames
Les lames de votre tondeuse ont
été fabriquées avec précision, pour
un usage spécique et demandent
un entretien particulier et un net-
toyage régulier an de garantir
un rendement maximal. Nettoyer
les lames après chaque utilisa-
tion, enlever les cheveux et autres
débris à l’aide de la brosse de net-
toyage fournie. Essuyer les guides
de coupe à l’aide d’un linge propre,
les remettre en place, puis ranger
l’appareil pour protéger les lames.
NE PAS MOUILLER LES LAMES,
LA POIGNEE OU L’ADAPTATEUR.
Le remplacement et l’entretien des
lames demandent une attention
toute particulière. Toujours s’assu-
rer que les deux lames sont rem-
placées/aûtées en même temps.
RANGEMENT : lorsque la ton-
deuse n’est pas utilisée, elle est
facile à ranger. La laisser refroidir
puis la garder dans un endroit sûr
et sec. Ne pas tirer ou plier le cor-
don, particulièrement au niveau
de la che.
UTILISATION DES GUIDES
DE COUPE
• Toujours éteindre l’appareil avant
d’installer ou retirer un guide de
coupe.
• Glisser le guide sur la lame et
presser l’arrière pour le xer.
• Pour retirer le guide, soulever
l’arrière et le dégager de la lame.
RECYCLAGE DE LA BATTERIE
Cet appareil contient une batterie
lithium-ion rechargeable. Pour
protéger l’environnement, cette
batterie doit être retirée et jetée
de manière appropriée en n de
vie. Pour retirer la batterie :
1. Débrancher la tondeuse de la
prise de courant.

Chat with your BaByliss Pro FX59E manual using AI

Get instant AI answers from your BaByliss Pro FX59E manual

Ask anything about the BaByliss Pro FX59E. Answers come from this manual, with the pages they are based on.

FX59E Maintenance Schedule

Remind me when maintenance is due
Every 6 months
Charge battery for longevity

Recharge the trimmer for 2 hours every 6 months to maintain optimal battery capacity.

After each use
Clean blades and housing

Remove hair and debris with the included brush and wipe the housing with a dry cloth.

Before, during, and after each use
Lubricate blades

Apply a few drops of lubricating oil to the front and sides of the blades, then wipe off excess.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend FX59E?

Yes No

Frequently Asked Questions

A

Charge continuously for 2 hours before first use. Maximum battery capacity is only reached after three charge and discharge cycles, so expect gradual improvement after repeated use.

Is this answer helpful?

A

HI runs at a higher speed for faster cutting, while LO runs at a lower speed for more controlled trimming. Use the 0-OFF position to switch the trimmer off when not operating.

Is this answer helpful?

A

Clean the blades after each use using the included brush, then wipe the body with a dry cloth. Apply a few drops of lubricating oil to the blades and wipe off excess oil. Regular cleaning and oiling are required for proper operation and warranty validity.

Is this answer helpful?

A

No. Do not wet or rinse the blades, the handle, or the adapter. Use dry wiping and the included brush, and keep moisture away from electrical parts.

Is this answer helpful?

A

Make sure the switch is on 0-OFF. Remove the blade set by releasing it from the housing using the thumb as described, then install the replacement blade set by snapping it into place. Replace both blades together and avoid using too much oil.

Is this answer helpful?

A

The trimmer contains a lithium-polymer rechargeable battery. When the unit reaches end of life, remove the battery and dispose of it through appropriate recycling or waste facilities in your region. Fully discharge the battery before removal.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 40 mm stainless steel T-blades designed for precision finishing and clean lines
  • Powerful DC motor with lithium-polymer rechargeable batteries for strong cordless performance
  • Includes 4 comb guides (3 mm, 6 mm, 10 mm, 13 mm) for consistent length control
  • Lightweight design with low heat and quiet operation for comfortable professional sessions
  • Includes cleaning brush and lubricating oil for correct blade upkeep
VS

Disadvantages

  • Requires regular cleaning and oiling; neglect can void warranty
  • Charging guidance requires an initial 2-hour charge plus multiple cycles for full capacity
  • Blades, handle, and adapter should not be wetted or rinsed
  • Service and repairs should be done by an authorized technician
  • Long-term battery handling requires proper removal and disposal steps
M: OA-GPT-54-NAN

Product Specification

Type

Hair clipper

Operating mode

Battery operation

Cutting width

1.57 in

Attachments

4x comb attachment

Special features

Charging indicator light

Operating time

75min

Charging time

2h

Scope of delivery

4x attachment, cleaning brush, oil

M: GO-GEM-FL-25

Product Description

BaByliss Pro FX59E Manual - Professional Cordless Detail Trimmer for Clean, Precise Finishing

The BaByliss Pro FX59E is a heavy-duty cordless finishing trimmer built for sharp, accurate outlining. Designed for professionals, it uses 40 mm stainless steel T-blades that excel at detailing, fine patterns, and precision lines. Whether you are working on beards, sideburns, or the neckline, its compact control helps you shape with confidence and achieve a close cut.

Power comes from a DC motor paired with lithium-polymer rechargeable batteries. The result is high performance without the hassle of a cord during styling. The trimmer is also noted for being lightweight, relatively quiet, and low-heat during use, which makes it practical for extended sessions. It includes four comb guides (3 mm, 6 mm, 10 mm, 13 mm) so you can switch between short lengths and tidy fades while maintaining consistent results.

Key performance results

  • 40 mm stainless steel T-blades for close, clean detailing and crisp edges
  • DC motor plus lithium-polymer battery system for strong, reliable cutting power
  • Cordless operation for easier handling around the beard, sideburns, and neckline
  • 4 comb guides (3 to 13 mm) to support consistent length control and styling

How to get the best cut

Before the first use, charge the trimmer continuously for 2 hours. Full capacity is reached after three charge and discharge cycles. Use the HI setting for higher speed or LO for lower speed, and always return the switch to 0-OFF when finished.

Maintenance is essential. The blades must be cleaned and oiled regularly for proper functioning and warranty validity. After each use, remove hair and debris with the included cleaning brush, wipe with a dry cloth, and apply a few drops of lubricating oil to the blades, then remove excess oil with a soft dry cloth. Follow the guidance to avoid getting the blades, handle, or adapter wet.

Notes

  • Do not rinse the blades, handle, or adapter.
  • Replace or sharpen blade sets as a matched pair.
  • Storage should be in a safe, dry place after the unit cools down.

For full care steps, refer to the BaByliss Pro FX59E Manual.

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly