Manual.ly Logo

BaByliss Pro 4Artists FOILFX02 FXFS2E Manual

0.0 · 0 Ratings

PDF manual · 120 Pages

English

M: QW-35-FL
page

/ 120

Loading...
9e33132a9aef2513e456728c36026ea3bedd page c
12
Weekly Maintenance:
1. Repeat steps 1 – 3 from the Daily
Maintenance cleaning steps.
2. Rinse the head of the shaver
under running water (see Fig.5).
NEVER submerge the shaver in
water.
3. Leave head open for drying.
4. Press the shaver head back into
place (see Fig. 4).
Fig. 5
Washable
BATTERY REMOVAL
When your rechargeable sha-
ver reaches the end of its useful
life, the Ni-MH batteries must be
removed from the shaver and be
recycled or disposed of properly
in accordance with your state and
local requirements. If this is not
required by law, you may elect to
dispose of the shaver with the bat-
teries.
To remove the rechargeable bat-
tery:
1. Unplug the shaver.
2. Run shaver until motor stops.
3. Remove foil head from shaver
(press release button and pull
head away from shaver body).
4. Remove screw from bottom
housing. Remove 2 screws from
metal plate under cutters.
5. Remove cutters by pulling away
from drive shafts.
6. Remove on/o switch and re-
lease button by lightly prying
free with a small screw driver.
7. Slide o metal cover.
8. Remove screws holding inner
plastic casing together.
9. Pry batteries free from circuit
board and cut wires.
10. Dispose batteries.
CONTAINS NICKEL METAL HY-
DRIDE BATTERY. MUST BE COLLEC-
TED, RECYCLED OR DISPOSED OF
PROPERLY. DO
NOT DISPOSE OF IN THE MUNICI-
PAL WASTE.
CAUTION: ALL RECHARGEABLE
BATTERIES MUST BE RECYCLED
OR DISPOSED OF IN ACCOR-
DANCE WITH APPLICABLE STATE
AND LOCAL REGULATIONS. DO
NOT PUT IN FIRE OR MUTILATE,
AS THE BATTERY MAY BURST OR
RELEASE TOXIC MATERIALS. DO
NOT SHORT-CIRCUIT, AS THIS MAY
CAUSE BURNS.

Chat with your BaByliss Pro 4Artists FOILFX02 FXFS2E manual using AI

Get instant AI answers from your BaByliss Pro 4Artists FOILFX02 FXFS2E manual

Ask anything about the BaByliss Pro 4Artists FOILFX02 FXFS2E. Answers come from this manual, with the pages they are based on.

4Artists FOILFX02 FXFS2E Maintenance Schedule

Remind me when maintenance is due
Daily
Clean the shaver head with brush

Remove the foil head assembly and use the included cleaning brush to remove debris from and around the cutters. Snap the head back into place.

Show in the manual (page 11)
Weekly
Rinse the shaver head under water

After daily cleaning steps, rinse only the detached foil head under running tap water. Never submerge the main unit. Let it air dry before reassembling.

Show in the manual (page 12)
Every 6 Months
Recharge battery if unused

To optimize battery life, recharge the device for 3 hours every six months if it has not been used during that period.

Regularly
Oil the internal cutters

The manual states that cutters must be cleaned and oiled on a regular basis for proper functioning; failure to do so will void the warranty.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend 4Artists FOILFX02 FXFS2E?

Yes No

Frequently Asked Questions

A

You must charge the shaver continuously for 3 hours before using it for the first time. The battery will reach its maximum capacity only after completing three full charge and discharge cycles.

Is this answer helpful?

A

No, you should never submerge the main shaver unit in water. Only the detachable foil head can be rinsed under running water. Clean the rest of the body with a damp cloth.

Is this answer helpful?

A

It is recommended to replace both the foil head assembly and the internal cutters at the same time. This ensures the best shaving performance and prevents damage to the motor.

Is this answer helpful?

A

Yes, but if you have sensitive skin or allergies, perform a test patch on your arm or leg before using it on your face. Avoid pressing too hard to prevent irritation.

Is this answer helpful?

A

If your hair is longer than 1mm, you should trim it down first with a trimmer or clipper. This prevents clogging and ensures a smoother, closer shave with the foil shaver.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Dual foil system provides a very close and efficient shave
  • Versatile corded and cordless operation for flexibility
  • Automatic voltage adapter makes it ideal for international travel
  • Washable foil head allows for easy deep cleaning
  • Low vibration and noise levels ensure comfort
VS

Disadvantages

  • Requires a specific 3-hour initial charge cycle before first use
  • Internal cutters and foil heads must be replaced together as a set
  • Device body cannot be submerged in water, only the head
  • Skin may require 2 to 4 weeks to fully adapt to the new razor
  • Batteries must be manually removed and recycled properly at end of life
M: QW-35-FL

Product Specification

Type

Men

Shaving System

Foil Shaver

Power Source

Mains, Battery (NiMH)

Application

Dry Shave

Blade System

2-blade

Display

No

Features

Automatic Voltage Adjustment

Battery Life

3h

Charging Time

3h

Package Contents

Bag, Cleaning Brush

M: QW-35-FL

Product Description

Experience the Precision of BaByliss Pro 4Artists FOILFX02 Men Shaver

The BaByliss Pro 4Artists FOILFX02 Men Shaver represents a pinnacle in personal grooming technology, designed for men who demand efficiency and a close shave. This cordless metal double foil shaver combines professional-grade performance with user-friendly features, making it an essential tool for daily maintenance or quick touch-ups before important events.

At the heart of this device is its dual foil system, which ensures a smooth and irritation-free shave even on sensitive skin. The unit operates effectively both cordlessly for portability and when plugged in for uninterrupted power. A key feature is the rechargeable Ni-MH battery, which requires an initial charge of three hours to reach full capacity after three cycles. Once charged, the shaver offers reliable performance for extended periods. The included adapter automatically adjusts to various voltage levels, making it suitable for travel across different regions without the need for additional converters.

Proper maintenance is crucial for longevity. The manufacturer emphasizes regular cleaning and lubrication of the internal cutters to prevent damage and ensure optimal cutting action. Daily care involves using the provided brush to remove hair debris, while weekly maintenance allows for rinsing the foil head under running water, though the main unit must never be submerged. Users are advised to replace both the foil head and internal cutters simultaneously to maintain the highest quality of shave. It typically takes two to four weeks for the skin to adapt to a new shaver, so consistency during this period yields the best results.

Safety is paramount, with clear warnings against modifying the device or exposing it to liquids beyond the washable head. The shaver emits low vibrations and noise levels, ensuring a comfortable experience. Whether you have short stubble longer than one millimeter that needs trimming first or fine hair requiring a close finish, the FOILFX02 handles it all with precision. Its ergonomic design and intuitive on-off switch make it accessible for all users, delivering professional results at home.

Important Notes

  • Always turn off the device before removing the foil head.
  • Do not use abrasive cleaners or chemicals on the body.
  • Recycle Ni-MH batteries according to local regulations at end of life.
M: QW-35-FL

© Copyright 2026 Manual.ly