Manual.ly Logo

Axing SES 522-06 Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: OA-GPT-54-NAN
page

/ 4

Loading...
940c375313ae33646f8aa10cb25f15af78a1 page 3
Manufacturer
AXING AG
Gewerbehaus Moskau
8262 Ramsen
EEA contact address
Bechler GmbH
Am Rebberg 44
78239 Rielasingen
State of the art 2018-04-11
Technical improvements, changes in design, printing- and other errors expected.
Safety advices:
Installation and repairs to the equipment may only be carried out by
technicians observing the current VDE guidelines. No liability will be
assumed in the case of faulty installation and commissioning.
Before opening the equipment pull out the power plug or remove the
power supply, otherwise there is danger of electrocution. This is also
valid for cleaning the equipment or working on the connections.
Only use the mains cable connected to the device. Never replace any
parts or make any modifications on the mains cable. Otherwise there is a
risk of mortal injury for which we cannot be held liable.
Providing that a serviceable fuse exists, the power plug must be pulled
out before changing the fuse. Defective fuses may only be replaced with
standard compliant fuses that have the same nominal value.
The equipment may only be operated in dry rooms. In humid rooms or
outdoors there is danger of short-circuit (caution: risk of fire) or
electrocution.
To prevent damage to your equipment and to avoid possible peripheral
damages, the devices foreseen for wall mounting may only be installed
on a flat surface.
Choose the location of installation or mounting so that the power plug
can be reached and pulled out of the socket easily in case of danger.
Choose the location of installation or mounting such that children may
not play unsupervised near the equipment and its connections. The
location of installation or mounting must allow a safe installation of all
cables connected. The mains cable as well as feeder lines may not be
damaged or clamped by objects of any kind.
Choose the location of installation or mounting so that under no
circumstances liquids or objects can get into the equipment (e.g.
condensation, water coming from leaking roofs or flowing water, etc.).
Avoid exposure of the equipment to direct sunlight and to other heat
sources (e. g. radiators. other electrical devices, chimney, etc.). Devices
that are equipped with heat sinks or ventilation slots must under no
circum-stances be covered or blocked. Also ensure for a generous air
circulation around the equipment. In this way you avoid possible damage
to the equipment as well as a risk of fire caused by overheating.
Absolutely avoid that cables come near any source of heat (e.g.
radioators, other electrical devices, chimney, etc.).
Technical data:
Frequency range TERR 5…862 MHz
Frequency range SAT (quattro LNB | wideband LNB) 950…2150 MHz | 250…2350 MHz
Input level (AGC) 60… 90 dBµV
Inputs 5
Subscriber ports 2
User bands 4
1
User band frequencies 1331/1382/1433/1484 MHz
Standards EN 50494, EN 50607
Tap loss TERR 17 dB
Output level SAT @ 60…90 dBµV input level 82 dBµV ±2,0 dB
Through loss TERR 2 dB ±2,0 dB
Through loss SAT 2 dB ±2,0 dB
Isolation H/V 30 dB
Return loss (inputs/outputs) ≥ 10 dB
Ambient temperature range (acc. to EN 60065) -20…70°C
Connectors F
LNB supply voltage 12 V
Max. LNB supply current (total | per LNB) 1000 mA | 500 mA
Current consumption from STB (SCR/CSS) 180 mA
Equipotential bonding connection 4 mm
2
Dimensions (W × H × D) appr. 140 x 111 x 63 mm
1
all 4 user bands are available at both outputs
SES 522-06
premium-line
Single cable multiswitch
II (SCR)
Operation instructions
You can call up the complete EU declaration of conformity for download by
entering the part number in the search field at www.axing.com.
WEEE Nr. DE26869279 | Electrical and electronic components must not be
disposed of as residual waste, it must be disposed of separately.

Chat with your Axing SES 522-06 manual using AI

Get instant AI answers from your Axing SES 522-06 manual

Ask anything about the Axing SES 522-06. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend SES 522-06?

Yes No

Frequently Asked Questions

A

It is used for distributing satellite and terrestrial TV/radio signals inside a house. The unit converts incoming signals into user bands so multiple receivers can access the system through a single-cable setup.

Is this answer helpful?

A

Yes. It can work with Wideband LNBs and includes a switch setting for that mode. The connections are arranged for wideband use, making it suitable for modern satellite installations.

Is this answer helpful?

A

The SES 522-06 provides four user bands: 1331 MHz, 1382 MHz, 1433 MHz, and 1484 MHz. These bands are available on both outputs for flexible receiver connections.

Is this answer helpful?

A

Yes. Up to three single-cable multiswitches can be connected in a cascade. This makes it possible to build a larger distribution system when more subscriber connections are needed.

Is this answer helpful?

A

Yes. The product information stresses that installation and repairs should be carried out by qualified technicians. This helps ensure safe operation, correct grounding, and proper signal performance.

Is this answer helpful?

A

Unused cascade outputs should be terminated with suitable termination resistors. This helps maintain proper signal behavior and prevents issues in the distribution chain.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Supports both Quattro and Wideband LNB setups for flexible installation options.
  • Offers 4 user bands on both outputs, compatible with EN 50494 and EN 50607.
  • Combines satellite and terrestrial distribution in one compact device.
  • Cascade support allows expansion of the system when more outputs are needed.
VS

Disadvantages

  • Installation and repairs should be handled only by a qualified technician.
  • Only two subscriber ports may be limiting for larger households without cascading.
  • Unused cascade outputs need termination resistors, adding extra setup steps.
  • Wideband LNB operation may require an external power supply in some systems.
M: OA-GPT-54-NAN

Product Specification

Satellite Inputs

4

Terrestrial Inputs

1

Outputs

4 (Sat-Loop), 1 (Terrestrial-Loop), 2 (Unicable II)

Unicable

max. 4 participants total

Cascadable

yes

Satellite Positions

2 (Quattro, Wideband)

Dimensions

5.51x4.37x2.48in (WxHxD)

M: OA-GPT-54-NAN

Product Description

Axing SES 522-06 Manual: Smart Satellite Signal Distribution

The Axing SES 522-06 is a premium-line single-cable multiswitch designed to make satellite distribution simpler, cleaner, and more flexible in modern home installations. If you are looking for a practical way to feed satellite and terrestrial signals to multiple receivers without complex cabling, this compact unit offers an efficient path forward. The Axing SES 522-06 Manual highlights a solution built for reliable signal handling, easy integration, and compatibility with common distribution standards.

One of the most notable strengths of this model is its ability to convert incoming signals into four user bands, making it suitable for SCR/CSS-based setups. It supports both Quattro LNB and Wideband LNB configurations, which gives installers more freedom when planning a system. With two subscriber ports and four user bands available on both outputs, it is especially useful for smaller households or targeted distribution setups where signal quality and simplicity matter.

The device also combines satellite and terrestrial signal paths, allowing radio and TV signals to be distributed through a single infrastructure. That makes it a strong choice for users who want to keep installations tidy while still preserving performance. The design supports cascading as well, so larger systems can be expanded by linking up to three units together. This flexibility is one of the reasons the SES 522-06 remains attractive for professional AV and antenna environments.

From a technical point of view, the unit is built for dependable operation in demanding conditions. It is designed for indoor use, offers equipotential bonding for safety, and follows the relevant EN standards for modern satellite distribution. The compact housing and clear connector layout further simplify installation planning, especially in structured cabling environments.

Notes

  • Best suited for indoor satellite and TV signal distribution.
  • Professional installation is strongly recommended.
  • Unused cascade outputs should be terminated properly.
  • Wideband setups may require an external power solution.

Key takeaways

  • Flexible support for Quattro and Wideband LNB systems.
  • Four user bands with EN 50494 and EN 50607 compatibility.
  • Two subscriber outputs with cascade expansion options.
  • Designed for safe, organized, and efficient signal distribution.
  • A compact choice for modern single-cable satellite networks.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly