Manual.ly Logo

Axing EoC Manual

0.0 · 0 Ratings

PDF manual · 56 Pages

English

M: QW-35-FL
page

/ 56

Loading...
306b78272b96853b79d5458b6ad80ae25946 page 1f
2020-04-01 | Technical improvements, changes in design, printing- and other errors expected. 3
STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
VCCI & CE...
CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Declaration of Conformity:
Hereby AXING AG declares that the marked products comply with the valid guidelines.
EoC 2-11: Hereby AXING AG declares that the device is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address: https://axing.com/en/ce.
WEEE Nr. DE26869279 | Electrical and electronic components must not be disposed of
as residual waste, it must be disposed of separately.
Safety instructions
Do NOT use the device near water or in rooms with high humidity such as humid cellars or near swimming
pools.
Do NOT use the device outdoors. All connections must be located inside a building.
Keep the device away from moisture, dust or corrosive liquids.
Do NOT install the device, use it or perform maintenance during a thunderstorm. There is a risk of electric
shock during thunderstorm.
Connect ONLY appropriate accessories to the device.
Use ONLY the supplied AC adapter.
Make sure that all cables are connected to the correct port.
Carefully lay the Ethernet, antenna and electric cables to ensure that nobody can step on or stumble over
them.
Do NOT cover the ventilation slots of the device since insufficient air supply may result in damage to the
device.
Do NOT place any objects on the device. Do not place objects filled with liquids such as vases on the device.
Position the device in a place where NOBODY can step on it.
In case of damage, interrupt the power supply immediately.
Do NOT try to repair the device. This equipment should ONLY be serviced or repaired by qualified service
personnel. Contact your distributor for more information.
Do NOT open the device.
Prior dismounting, disconnect the electric, Ethernet and antenna cable from the device.

Chat with your Axing EoC manual using AI

Get instant AI answers from your Axing EoC manual

Ask anything about the Axing EoC. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend EoC?

Yes No

Frequently Asked Questions

A

It builds an Ethernet network over existing coaxial house cabling using the G.hn standard, allowing data transmission alongside TV and radio signals.

Is this answer helpful?

A

Yes, the EOC 2-31 features dual-band Wi-Fi support for both 2.4 GHz and 5 GHz frequencies, acting as a wireless access point.

Is this answer helpful?

A

Yes, you must use specific antenna sockets like the BSD 963-13N and inserts like the TZU 40-04 to ensure sufficient blocking depth.

Is this answer helpful?

A

The system supports a maximum of 16 devices within a single Ethernet over Coax network configuration.

Is this answer helpful?

A

No, only the EOC 2-31 supports configuration via a graphical user interface; the EOC 1-31 operates with fixed settings.

Is this answer helpful?

A

Changes made in the configuration pages will not take effect until you click the Active button in the Active Changes section.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Utilizes existing coaxial cables to create a high-speed Ethernet network without new wiring
  • EOC 2-31 model includes dual-band Wi-Fi (2.4 GHz and 5 GHz) for versatile wireless access
  • Supports up to 16 devices in a single peer-to-peer network with 720 Mbps data rates
  • Compatible with multiple internet sources including cable, telephone, and satellite providers
VS

Disadvantages

  • Requires specific compatible components like return-path capable amplifiers and inserts
  • Configuration changes must be manually activated via the Active Changes menu to apply
  • EOC 1-31 model lacks a graphical user interface for configuration compared to the EOC 2-31
  • TV connection frequency range excludes DAB and FM reception without additional equipment
M: QW-35-FL

Product Specification

Type

Powerline Adapter (Standalone)

Form Factor

1x external wired

Power Supply

Power supply not via connection, mains connection (1x 12V barrel jack), external power adapter required and included (1x 12V barrel/0.5A)

Dimensions

5.12x1.26x3.74 inches (WxHxD)

Compatibility

G.hn (Ethernet over Coax)

M: QW-35-FL

Product Description

Expand Your Home Network with Axing EOC Ethernet over Coax

Transform your existing coaxial cable infrastructure into a powerful high-speed network using the Axing EOC Ethernet over Coax solution. This innovative technology leverages the G.hn standard to transmit data through the same cables that deliver your television and radio signals, eliminating the need for new wiring throughout your home. Whether you are dealing with a complex multi-room setup or simply want to extend connectivity to remote areas, these devices provide a seamless peer-to-peer networking experience.

The Axing EOC series includes the EOC 1-31 and the advanced EOC 2-31 models. While both units serve as robust bridges for your network, the EOC 2-31 stands out with its integrated dual-band Wi-Fi capabilities. It supports both 2.4 GHz and 5 GHz frequencies, allowing you to connect wireless devices directly without needing an additional router. The device features two Gigabit Ethernet ports, enabling you to connect wired devices like PCs, smart TVs, or gaming consoles with maximum speed. Configuration is intuitive via a web-based interface, offering deep customization options for Virtual Access Points, VLANs, and security settings.

Installation is straightforward and flexible. You can mount the unit on a wall or place it on a desk. The system communicates in the return path frequency range of 5 to 65 MHz, ensuring compatibility with most modern distribution networks. It works seamlessly with various internet sources, including cable operators and telephone providers, provided the necessary filters and adapters are used to prevent interference. With support for up to 16 devices in a single network and a net data rate of 720 Mbps, this solution ensures your home remains connected at lightning speeds.

Key Features

  • Dual-Band Wi-Fi: The EOC 2-31 offers flexible wireless access points on both 2.4 GHz and 5 GHz bands.
  • High-Speed Data: Achieve net data rates up to 720 Mbps over existing coaxial lines.
  • Versatile Integration: Compatible with cable, satellite, and telephone provider setups.
  • Advanced Configuration: Full control over VLANs, security protocols, and network topology.

Important Notes

Always ensure your coaxial distribution components are compatible with the return path range. For installations involving cable operators, specific inserts like the TZU 40-04 are mandatory to maintain signal integrity. Remember to activate all configuration changes via the Active Changes menu for them to take effect.

M: QW-35-FL

© Copyright 2026 Manual.ly