Manual.ly Logo

Atika Patriot 250 Manual

0.0 · 0 Ratings

PDF manual · 116 Pages

English

M: gpt-5.6-terra
page

/ 116

Loading...
64b84d10aa3062ad1f0a2dc7b017d8c2fc2d page e
By purchasing this mixer, you have acquired a high-quality,
perfected and efficient machine.
Keep these instructions in a safe place for later reference.
Be sure that you have carefully read and
fully understood these
instructions before you
start the machine, and adhere to all of them.
12
Contents
Meaning of the symbols 1
Symbols in the operating manual 12
Proper use 12
Residual risks 12
Operating times 12
Safety instructions 12
Start-up 13
Mixing 14
Transport 14
Storage 14
Cleaning 15
Maintenance 15
Repair 15
Equipment failures 15
Guarantee 15
Technical data 114
Spare parts 116
Symbols in the operating manual
Potential hazard or hazardous situation. Failure to
observe this instruction may lead to injuries or cause
damage to property.
L
Important information on proper handling. Failure to
observe this instruction may lead to faults.
User information. This information helps you to use all
the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Proper use
• This concrete mixer can be used for mixing concrete and
mortar both professionally and non-professionally.
• Proper use includes adherence to the operating, maintenance
and repair instructions of the manufacturer and observance of
the safety instructions they contain.
• Any other utilisation counts as improper use, especially mixing
combustible or explosive materials (fire and explosion hazard)
and use with foodstuffs. The manufacturer is not liable for
damages resulting from improper use, « the user alone
shall bear the risk.
• Unauthorised modifications on the device exclude a liability
of the manufacturer for damages of any kind resulting from
it.
• Only persons who are familiarised with the device and
informed about possible risks are allowed to prepare,
operate and service this device. Repair works may only be
carried out by us or by a customer service agent nominated
by us.
R
R
e
e
s
s
i
i
d
d
u
u
a
a
l
l
r
r
i
i
s
s
k
k
s
s
Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the “Safety instructions” and
the “Intended usage” as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will
reduce the risk of personal injury or damage to the equipment.
• Risk of injury to fingers and hands when reaching with the
hand into the running mixing drum. Providing protection
against the danger of getting caught in the rotating stirring
grating would not be practicable (please refer to prEN 12151).
• Risk from electricity when using improper electrical
connections.
• Touching live parts of opened electrical components.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
O
O
p
p
e
e
r
r
a
a
t
t
i
i
n
n
g
g
t
t
i
i
m
m
e
e
s
s
Please observe as well the regional regulations for noise
protection.
Safety instructions
Take note of the following instructions to protect
yourself and others from hazards and injuries.
• Observe local accident prevention and safety regulations in
the work area.
•
Do not touch, inhale (dust development) or eat the
cement or additives. Wear personal, protective clothing
(gloves, goggles and a dust mask) when filling and emptying
the mixing drum.
• Set up and run the concrete mixer on a
solid, level base only (where it will not tip
over).
• Make sure that there is no danger of tripping near the mixer.
• Be sure that there is enough light.
• The operator is responsible for third parties in the work area.
• Keep children away from mixer.
• Persons younger than 16 years of age are not allowed to
operate the mixer.
• Only use the mixer for the functions listed in "Proper use".
• Do not alter the machine or any of its parts.
• Replace defective or damaged parts on the machine
immediately.
• Only start up the mixer if the protective devices are complete
and undamaged.

Chat with your Atika Patriot 250 manual using AI

Get instant AI answers from your Atika Patriot 250 manual

Ask anything about the Atika Patriot 250. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Patriot 250?

Yes No

Frequently Asked Questions

A

It is intended for mixing concrete and mortar. Suitable mixes may include water, sand, gravel, cement, lime, and compatible additives. Do not use it for food products or combustible or explosive materials.

Is this answer helpful?

A

Connect the mixer through a 30 mA residual current device. Use suitable splash-protected heavy-duty cables. For extension leads up to 25 m, use at least 1.5 mm2 conductors; for longer leads, use at least 2.5 mm2.

Is this answer helpful?

A

Viewed through the drum opening, the drum should turn counter-clockwise, following the direction arrow on the drum. Check rotation after startup. Correct an incorrect direction only using the prescribed connection adjustment method.

Is this answer helpful?

A

No. The operating guidance states that the drum should be filled and emptied only while the motor is running. Keep hands clear of the rotating drum and hold the tilting lever or handwheel securely during discharge.

Is this answer helpful?

A

Disconnect power before cleaning. Clean the exterior and interior after work. For the drum interior, run water with a few shovels of gravel to release residue. Do not strike the drum with hard tools or spray the motor and switch directly with water.

Is this answer helpful?

A

The thermal protector may stop the motor when overloaded or when ventilation openings are blocked. Disconnect power, allow the motor to cool, and identify the cause. Check for excessive load and clean obstructed air openings before restarting.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Designed for mixing concrete and mortar in home, renovation, landscaping, and professional applications.
  • 400V three-phase operation supports consistent drum performance for demanding mixing tasks.
  • Adjustable drum positioning helps suit concrete and mortar mixing, loading, and controlled emptying.
  • Thermal motor protection shuts the machine down during overload or overheating.
  • Low-maintenance design includes permanently lubricated drum and drive-shaft bearings.
VS

Disadvantages

  • Requires a suitable 400V three-phase electrical supply and a 30 mA residual current device.
  • Safe use depends on level, tip-resistant placement and strict separation from rotating parts.
  • Cement dust and additives require protective equipment during loading and unloading.
  • Long or undersized extension cables can reduce motor power and trigger performance problems.
  • Electrical repairs and certain servicing tasks require authorized professional support.
M: gpt-5.6-terra

Product Specification

Power

900 W (400 V)

Capacity

66.04 gal

Special features

Handwheel

Weight

302.03 lb

M: gpt-5.6-terra

Product Description

Atika Patriot 250 400V Electric Concrete Mixer

The Atika Patriot 250 400V Electric Concrete Mixer is built for dependable concrete and mortar preparation on demanding home improvement, renovation, landscaping, and professional building jobs. Its three-phase 400V setup supports consistent mixing performance, while the rotating drum helps combine water, aggregate, cement, lime, and other suitable materials into a workable blend.

Designed for Practical Mixing Work

A correct drum position is essential for efficient results. The mixer can be set for mortar or concrete work, allowing users to control the drum angle during loading, mixing, and discharge. For best results, begin with water and aggregate such as sand or gravel, then add binding material in measured stages. Continue alternating ingredients until the required ratio is reached, and allow the drum time to mix thoroughly.

The drum should rotate counter-clockwise when viewed from its opening. Checking this direction before work begins is particularly important on a 400V three-phase connection. If rotation is incorrect, adjustment should be performed carefully by a qualified and informed user following the applicable electrical guidance.

Safety Comes First

The Atika Patriot 250 400V Electric Concrete Mixer should always stand on a firm, level surface that prevents tipping. Keep the work area well lit, clear of trip hazards, and free from children or unauthorized people. Wear gloves, eye protection, and a dust mask when handling cement and dry additives.

Never reach into a rotating drum or touch moving components. The protective covers must be complete and closed during operation. Disconnect the power supply before transport, cleaning, inspection, maintenance, troubleshooting, or any pause where the mixer is left unattended. A 30 mA residual current device is required for electrical protection.

Cleaning, Storage, and Care

Cleaning after use helps preserve mixing quality and prolongs the life of the machine. Let water and a small amount of gravel circulate inside the drum to loosen residue. Remove concrete and mortar from the drive gear teeth promptly, but do not grease the ring gear. Avoid spraying water directly onto the motor, switch, or ventilation openings.

For transport and storage, unplug the mixer and point the drum opening downward. Store it in a dry, locked location away from children. The drum and drive shaft use permanently lubricated bearings, while the tilting mechanism can benefit from environmentally compatible spray oil before long storage periods.

Notes

The Atika Patriot 250 400V Electric Concrete Mixer - Read, Download & Print Free is a useful reference for safe setup, effective mixing routines, electrical connection practices, routine care, and common operating checks. Use original replacement parts and have electrical repairs completed by authorized specialists.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly