Manual.ly Logo

Atika HB 60-2/HB 72-2 Manual

0.0 · 0 Ratings

PDF manual · 184 Pages

English

M: gpt-5.6-terra
page

/ 184

Loading...
7291fa6134a296dc04849dee08bc9074db4a page 10
16
Contents
EC Declaration of Conformity
16
Extent of delivery
16
Symbols original operating manual
16
Symbols machine
17
Description of device / spare parts
17
Operating times
17
Normal intended use
18
Risidual risks
18
Vibrations
18
Safety instructions
18
−
Safe handling with fuels
20
Before the first start-up
20
Fuelling
20
− Petrol
20
−
Two-stroke engine oil
20
− Mixing
20
− Fuelling the hedge trimmer
20
Start-up
21
−
To start the hedge trimmer
21
− Throttle lock-out switch
21
−
Starting with cold engine
21
− Stopping the engine
21
− Stopping the engine in an emergency
21
−
Starting with warm engine
21
Adjustments on the hedge trimmer
21
Working instructions
21
− General behaviour when working with the
hedge trimmer
22
−
Working with the hedge trimmer
22
Maintenance and Care
23
− Maintenance
23
− Adjusting the cutting device
23
−
Lubricating the gearbox
23
− Adjusting the idle speed
23
− Cleaning/replacing the air filter
23
− Cleaning/replacing the fuel filter
24
− Checking/replacing the spark plug
24
−
Checking the ignition spark
24
− Silencer/exhaust outlet
24
− Care
24
Transport
25
Storage
25
Maintenance and cleaning schedule
25
Possible faults
26
Technical data
27
Guarantee
27
EC Declaration of Conformity
No. (S-No.): 17304 HB 60-2
No. (S-No.): 17311 HB 72-2
according to EC directive: 2006/42/EC
We,
ATIKA GmbH
Josef-Drexler-Str. 8, 89331 Burgau - Germany
herewith declare under our sole responsibility that the product
Heckenschere (petrol hedge trimmer) type HB 60-2
Serial number: 000001 – 020000
Heckenschere (petrol hedge trimmer) type HB 72-2
Serial number: 000001 – 020000
is conform with the above mentioned EC directive as well as with
the provisions of the guidelines below:
2014/30/EU and 2000/14/EC
Following harmonized standards have been applied:
EN ISO 10517:2009+A1:2013
Conformity assessment procedure: 2000/14/EC - Appendix V.
Measured level of the acoustic output L
WA
109 dB (A).
Guaranteed level of the acoustic output L
WA
112 dB (A).
Duly authorised person for the complilation of technical
documents:
ATIKA GmbH – Technical department – Josef-Drexler-Str. 8,
89331 Burgau – Germany
i.A.
i.A. G. Koppenstein,
Burgau, 02.11.2016 Engineering design management
Extent of delivery
• Hedge trimmer
• Fuel mixing can
• Tool bag
• Operating manual
• Knife protection
• Assembly and operating
instruction sheet
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately.
Symbols original operating manual
Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or cause
damage to property.
Important information on proper handling of the
hedge trimmer. Not observing this instruction can
lead to faults in the hedge trimmer.
User information. This information helps you to use
all the functions of the hedge trimmer optimally.
Assembly, operation and servicing the hedge
trimmer. Here you are explained exactly what to do.

Chat with your Atika HB 60-2/HB 72-2 manual using AI

Get instant AI answers from your Atika HB 60-2/HB 72-2 manual

Ask anything about the Atika HB 60-2/HB 72-2. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend HB 60-2/HB 72-2?

Yes No

Frequently Asked Questions

A

It is designed for private house and hobby garden hedge maintenance. It is suitable for trimming and shaping hedges and shrubs, but it should not be used for grass, lawn edges, compost shredding, public grounds, agriculture, or forestry.

Is this answer helpful?

A

Use unleaded petrol rated at least 91 RON mixed with suitable two-stroke engine oil at a 40:1 ratio. This equals 25 ml of oil per litre of petrol. Use fresh fuel and avoid ready-mixed fuel from filling stations.

Is this answer helpful?

A

The HB 60-2 has a 550 mm cutting length and a 600 mm blade length. The HB 72-2 has a 720 mm cutting length and an 800 mm blade length. Both list a maximum cutting thickness of 28 mm.

Is this answer helpful?

A

Yes. The rear handle has five selectable working positions. This can make it easier to keep a controlled grip while trimming vertical hedge sides or horizontal top surfaces. Ensure the handle locks securely before operating.

Is this answer helpful?

A

Wear eye protection, hearing protection, protective gloves, safety footwear, and close-fitting work clothing. A helmet is recommended where there is a risk of head injury. Keep other people and animals at least 15 metres from the work area.

Is this answer helpful?

A

The gearbox should be lubricated every 25 operating hours. Use an appropriate grease, but do not completely fill the gearbox because heat can expand the grease and damage seals or cause leakage.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Two blade-length options provide 550 mm or 720 mm cutting reach for different hedge sizes.
  • 0.75 kW, 25.4 cc petrol engine delivers cordless mobility for private garden trimming.
  • Five-position rotating rear handle can improve comfort when cutting sides and tops.
  • Double-sided blades support efficient forward, reverse, and sweeping cutting motions.
  • Supplied accessories include a fuel mixing can, tool bag, blade guard, and service tools.
VS

Disadvantages

  • At approximately 6.3 to 6.5 kg empty, it may feel heavy during prolonged overhead work.
  • The 112 dB(A) guaranteed sound power level requires hearing protection and noise awareness.
  • It needs 40:1 fuel mixing plus routine air filter, spark plug, blade, and gearbox maintenance.
  • Petrol exhaust means it must only be used outdoors in well-ventilated areas.
  • Maximum stated cutting thickness is 28 mm, so thick hardwood branches may need pre-cutting.
M: gpt-5.6-terra

Product Specification

Type

Hedge trimmer

Power

750 W, 1.02 hp, 22 cm3, 2-stroke

Cutting length

21.65 in

Cutting capacity

1.1 in

Features

Auxiliary handle

Fuel tank capacity

15.22 fl oz

Weight

13.89 lb

M: gpt-5.6-terra

Product Description

Atika HHS 710/56 Petrol Hedge Trimmer - Read, Download & Print Free

The Atika HHS 710/56 Petrol Hedge Trimmer is a practical choice for homeowners who need petrol-powered performance for routine hedge care. Designed for private house and hobby gardens, this machine combines a two-stroke engine with double-sided cutting blades to handle shaping, tidying, and seasonal trimming jobs. It is intended for hedges and shrubs, not grass edging, compost shredding, or commercial use.

Power and Cutting Capability

The range includes two closely related versions: the HB 60-2 with a 550 mm cutting length and the HB 72-2 with a 720 mm cutting length. Both use a 25.4 cc engine rated at 0.75 kW at 7,500 rpm, with a cutting speed of 1,950 cuts per minute. The stated maximum cutting thickness is 28 mm, although dense or very thick branches should be reduced with loppers before trimming.

A 0.45 litre fuel tank supports a petrol and two-stroke oil mixture at a 40:1 ratio. The trimmer requires unleaded petrol with an octane rating of at least 91 RON and two-stroke oil meeting JASO FC or ISO EGD specifications. Accurate mixing and fresh fuel are important for reliable starting, clean running, and engine protection.

Handling and Everyday Use

A rotating rear handle can be locked into five working positions, helping users maintain a more comfortable grip while cutting hedge sides and tops. The double-sided blade design supports forward, backward, and sweeping cutting movements. For a neat finish, trim the sides first, work from the bottom upward, and shape the hedge slightly wider at the base than at the top.

The machine should always be held with both hands. Before use, inspect the blades, guards, controls, fuel lines, and fasteners. Keep bystanders, children, and animals at least 15 metres away. Eye protection, hearing protection, gloves, sturdy footwear, and suitable workwear are essential because this petrol hedge trimmer produces substantial noise and vibration.

Care, Storage, and Safe Operation

Regular care helps preserve cutting performance. Clean the blade after use, apply environmentally suitable oil to moving parts, check the air filter regularly, and lubricate the gearbox every 25 operating hours. The spark plug should be inspected periodically and replaced every 100 hours or once per season. Never run the engine indoors, as exhaust gases create a carbon monoxide hazard.

Note: Stop the engine, wait for blade movement to end, and disconnect the spark plug connector before cleaning, clearing jams, transporting, or carrying out maintenance. Fit the blade guard before transport or storage.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly