Manual.ly Logo

Atika HA 710/61 Manual

0.0 · 0 Ratings

PDF manual · 116 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 116

Loading...
0d213f9f350d659a18f8e4e4caab73295711 page d
13
Reinigung
L
Reinigen Sie das Gerät und Zubehör nach jedem Ge-
brauch sorgfältig, damit die einwandfreie Funktion erhal-
ten bleibt.
 Reinigen Sie das Gehäuse mit einer weichen Bürste oder
einem trockenen Lappen.
Wasser, Lösungsmittel und Poliermittel dürfen nicht
verwendet werden.
 Reinigen Sie die Messer regelmäßig mit einer Bürste oder
einem Lappen.
L Reinigen Sie die Messer nie mit Wasser
Î Korrosionsgefahr!
L Ölen Sie regelmäßig die Messer. Niemals Fett ver-
wenden!
Verwenden Sie umweltverträgliches Öl.
 Halten Sie die Handgriffe frei von Öl und Fett.
Lagerung
Netzstecker ziehen.
Bewahren Sie unbenutzte Geräte an einem trockenen, ver-
schlossenen Ort außerhalb der Reichweite von Kindern auf.
Beachten Sie vor einer längeren Lagerung folgendes, um
die Lebensdauer der Heckenschere zu verlängern und ein
leichtgängiges Bedienen zu gewährleisten:
- Führen Sie eine gründliche Reinigung durch.
- Behandeln Sie alle beweglichen Teile mit einem umwelt-
freundlichen Öl
L
Niemals Fett verwenden!
Schieben Sie den Messerschutz auf das Messer.
Garantie
Bitte beachten Sie die beiliegende Garantieerklärung.
Mögliche Störungen
Störung Mögliche Ursache Beseitigung (Netzstecker ziehen)
Heckenschere läuft nicht.
• Kein Strom
• Stromausfall
• Verlängerungskabel defekt
• Sicherung defekt
• Motor oder Schalter defekt
• Stromversorgung prüfen
• Stromversorgung prüfen
• Kabel überprüfen, defekte Kabel nicht mehr benutzen
• Sicherung wechseln
• Motor oder Schalter von einer konzessionierten Elektro-
fachkraft überprüfen oder reparieren lassen.
Heckenschere schneidet mit Unter-
brechungen
• Kabel defekt
• Interner Fehler
• Ein-/Ausschalter defekt
• Stromversorgung prüfen
• Hersteller, bzw. zuständige Kundendienststelle aufsu-
chen
• Hersteller, bzw. zuständige Kundendienststelle aufsu-
chen
Motor läuft, Messer bleiben stehen
• Interner Fehler
•
Hersteller, bzw. zuständige Kundendienststelle aufsu-
chen
Messer werden heiß
• Messer sind stumpf
• Messer sind defekt
• Fehlende Schmierung → Reibung
• Messer schärfen lassen
• Messer austauschen
• Ölen der Messer
Motor brummt, Messer bleiben ste-
hen
• Messer blockieren • Gegenstand entfernen
Bei weiteren Fehlfunktionen setzten Sie sich bitte mit unserem Kundendienst in Verbindung.
0 23 82 / 8 92 – 54 oder 0 23 82 / 8 92 – 58 oder 0 23 82 / 8 92 – 65

Chat with your Atika HA 710/61 manual using AI

Get instant AI answers from your Atika HA 710/61 manual

Ask anything about the Atika HA 710/61. Answers come from this manual, with the pages they are based on.

HA 710/61 Maintenance Schedule

After each use
Clean the machine and accessories

Thoroughly clean the case with a soft brush or dry cloth. Never use water, solvents, or polishing agents.

Show in the manual (page 13)
Regularly
Clean the cutting blades

Clean the knives regularly with a brush or cloth. Never clean knives with water to avoid corrosion.

Show in the manual (page 13)
Regularly
Lubricate the cutting blades

Oil the cutting tools regularly using environmentally friendly oil. Never use grease.

Show in the manual (page 13)
Before long-term storage
Prepare for storage

Perform a thorough cleaning and treat all movable parts with environmentally friendly oil before storing.

Show in the manual (page 13)
Regularly
Inspect the machine

Check for obvious defects such as loose, damaged, or worn components and ensure protective devices are intact.

Show in the manual (page 12)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend HA 710/61?

Yes No

Frequently Asked Questions

A

No, this device is intended only for private use in home and hobby gardens. It is not approved for public facilities, parks, or agricultural use. Using it elsewhere may void the warranty and assumes full risk for the user.

Is this answer helpful?

A

You should regularly oil the blades to maintain performance. Use only environmentally friendly oil and never grease. Grease can attract debris and damage the cutting edges.

Is this answer helpful?

A

Always wear eye protection and hearing protection due to noise. Gloves are also mandatory. Ensure you check all safety devices are fitted before use.

Is this answer helpful?

A

No, you must remove all metal objects like wires from the hedge before cutting. These objects can damage the blades and cause the machine to break or throw pieces.

Is this answer helpful?

A

Clean with a dry cloth or soft brush. Never use water, solvents, or polishing agents as this causes corrosion. Keep handles free of oil.

Is this answer helpful?

A

The cutting length for the AH 710/61 model is 560 mm, offering a good balance for standard home hedges with a blade length of 610 mm.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • 710 Watt motor handles thick branches easily without stalling.
  • Adjustable rear handle allows five working positions for comfort.
  • Double-sided blades enable versatile cutting movements.
  • Safe two-hand switch prevents accidental start-ups.
  • High branch clearance cuts stems up to 24 mm cleanly.
VS

Disadvantages

  • Electric cord limits mobility compared to battery tools.
  • Weight of 3.4 kg may cause fatigue over time.
  • High noise level requires hearing protection for safety.
  • Cannot operate in wet conditions due to electrical risk.
  • Limited to private use and not for commercial gardening.
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Hedge trimmer

Power

710W

Cutting length

22.05 in

Cutting capacity

0.94 in

Features

Softgrip, Auxiliary handle

Weight

7.28 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Discover the Power of the Atika HA 710/61 Electric Hedge Trimmer

Maintaining a pristine garden requires reliable tools that deliver performance and safety. The Atika HA 710/61 Electric Hedge Trimmer stands out as a robust choice for homeowners seeking efficient trimming capabilities. This powerful unit is designed specifically for private use in home and hobby gardens, ensuring that your hedges look neat and healthy throughout the growing season. Understanding the specifications and safety guidelines found in the Atika HA 710/61 Electric Hedge Trimmer Manual is crucial for optimal operation and longevity of the equipment.

Performance and Design Features

Powered by a high torque 710 Watt motor, this trimmer handles thick branches with ease. The blade length of 610 mm allows for longer cuts, reducing fatigue during extensive trimming tasks. A key feature is the adjustable rear handle, which can be set in five positions for comfortable handling at various angles. The double-sided cutting blades enable forward, backward, and pendulum movements, giving you versatility in shaping your shrubbery. The branch clearance of 24 mm ensures that even thicker stems are cut cleanly without jamming. Safety is paramount, featuring a two-hand safety switch that prevents accidental start-ups, along with a dedicated hand guard included in the delivery package.

Safety and Maintenance Guidelines

Operating any garden power tool requires strict adherence to safety protocols. Users must always wear eye protection and hearing protection due to the noise levels generated during operation. The device must only be used in dry conditions to prevent electrical hazards. Before every use, check that all safety devices are correctly assembled. It is important to remove any metal objects like wires from the hedge before cutting to avoid damage to the blades. When maintenance is required, only oil the blades and never use grease. Cleaning should be done with a dry cloth to prevent corrosion on the metal parts.

Usage and Technical Considerations

Noise regulations apply during specific times, particularly in residential areas. Users should be aware of local laws regarding sound emissions when operating machinery near neighbors. The vibration levels are measured to ensure operator safety, but prolonged use without breaks may cause fatigue. Ensure you have enough space to work and step back safely after cutting. The power cord must be kept clear of the cutting area to prevent accidental severing by the blades. Using a cable drum requires unwinding it completely to avoid voltage drops and reduced motor performance.

Conclusion

By following the operational instructions and maintaining the device correctly, you ensure years of reliable service. Proper storage is essential after winter. Always store the unit in a dry place, ideally with the blade protection fitted. Investing in quality equipment like this ensures your garden remains a beautiful space without the worry of frequent breakdowns or safety incidents. Enjoy the results of professional trimming from the comfort of your own home with confidence.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly