Manual.ly Logo

Atika BH800N Manual

0.0 · 0 Ratings

PDF manual · 124 Pages

English

M: QW-35-FL
page

/ 124

Loading...
4dd4df9efa18a334f00d262f0be99c6173e6 page 10
16
Do not modify the device or parts of the device respectively.
Before turning on the motor, make sure that your feet are at
a safe distance from the cutting tools.
Never keep hands or feet close to or under rotating parts.
Keep away from the ejection slot.
Work very careful on difficult soils (stony, hard, etc.). Reduce
the working speed and firmly hold the machine.
Pay attention to sure footing especially when working on
slopes or on wet ground and keep your balance at all times.
Guide the device only a walking speed.
Do not work on steep slopes.
When working on slopes, always work perpendicular to the
slope and never up and down.
Be especially careful when changing the operating direction
on a slope.
Observe the safety distance given by the handle bar.
Always push the device forward while it is operating. Do not
pull it to yourself or behind you.
While the motor is running, do not
− lift or carry the device about
Caution! The tool runs after. Do not try to slow down the tool
by hand.
Make sure that the protective cover is properly attached.
Turn off the device and wait until the tools are stationary
when:
− tilting the device
− crossing hard ground
− transporting the device to and from the work area
Switch the machine off and remove the mains plug from the
socket when
− carrying out repair works
− maintenance and cleaning
− removing malfunctions and blockages
− transport and storage
− leaving unattended (even during short interruptions)
− when the device begins to exhibit unusual vibrations
− when you have hit an obstacle with the device.
Do not wash down device with water. (origin of danger
electric current).
Store unused equipment in a dry, locked place out of the
reach of children.
Check the machine for possible damage:
− Before continuing to use the machine, the protective
devices must be inspected to ensure that they work
perfectly and with their intended function.
− Check whether movable parts function perfectly and do
not stick or whether parts are damaged. All parts must be
correctly installed and fulfil all conditions to ensure
perfect operation.
− Damaged guards and parts must be properly repaired or
exchanged by a recognized, specialist workshop; insofar
as nothing else is stated in the instructions for use.
− Damaged or illegible safety warning labels should be
replaced immediately.
Maintain your device with care:
− Ensure that all nuts, bolts and screws are tight.
− Make sure that the ventilation apertures are free.
− Keep handles free of oils and grease.
− Follow the maintenance instructions.
Electrical safety
Design of the connection cable according to IEC 60245 (H
07 RN-F) with a core cross-profile section of at least
- 1.5 mm² for cable lengths up to 25 m
- 2.5 mm
2
for cable lengths over 25 m
Long and thin connection lines result in a potential drop. The
motor does not reach any longer its maximal power; the
function of the device is reduced.
Plugs and coupler outlets on connection cables must be
made of rubber, non-rigid PVC or other thermoplastic
material of same mechanical stability or be covered with this
material.
The connector of the connection cable must be splash-proof.
When running the connection line observe that it does not
interfere, is not squeezed, bended and the plug connection
does not get wet.
Wind off completely the cable when using a cable drum.
Do not drive the device across the extension cable. Make
sure that it is behind you in a secure position. Place the
cable on a path or area that has already been worked.
Do not use the cable for purposes for which it is not meant.
Protect the cable against heat, oil and sharp edges. Do not
use the cable to pull the plug from the socket.
Protect yourself against electric shocks. Avoid touching
earthed parts with your body (e.g. pipes, heating apparatus,
cookers, fridges etc.).
This device generates an electromagnetic field during
operation. Such a field may affect active or passive medical
implants under certain circumstances. To reduce the risk of
serious injuries we recommend persons who carry medical
implants to consult their doctor and the manufacturer of the
medical implant before operating this device.
Regularly check the extension cables and replace them if
they are damaged.
Do never connect a damaged cable to the mains. Do not
touch a damaged cable before it is disconnected from the
mains. A damaged cable may cause contact with live parts.
Do not use any defective connection cables.
When working outdoors, only use extension cables especially
approved and appropriately labelled for outdoor use.
Do not set up any provisional electrical connections.
Never bypass protective devices or deactivate them.
Only hook up the machine by means of a fault-current circuit
breaker (30 mA).
The electrical connection or repairs to electrical parts of the
machine must be carried out by a certified electrician or
one of our customer service points. Local regulations –
especially regarding protective measures – must be
observed.
Damaged mains leads must be replaced by the
manufacturer or one of their service workshops or a similar
qualified person to prevent dangers.
Repairs to other parts of the machine must be carried out
by the manufacturer or one of his customer service points.
Use only original spare parts, accessories and special
accessory parts. Accidents can arise for the user through
the use of other spare parts. The manufacturer is not liable
for any damage or injury resulting from such action.

Chat with your Atika BH800N manual using AI

Get instant AI answers from your Atika BH800N manual

Ask anything about the Atika BH800N. Answers come from this manual, with the pages they are based on.

BH800N Maintenance Schedule

After each use
Clean the device and hoeing tools

Remove dirt with a cloth or brush. Clean the bottom, housing, and vent slots immediately after work. Do not use water or solvents.

Before each use
Check condition of hoeing tools

Inspect blades for wear or damage before every use. Worn blades reduce performance and overload the motor. Sharpen or replace if needed.

Every 40-50 operating hours
Lubricate the gearbox

First lubrication after 20 hours, then every 40-50 operating hours. Apply grease via filling plug. Do not overfill to prevent seal damage.

Regularly
Inspect extension cables

Check extension cables regularly for damage. Replace damaged cables immediately to avoid electric shock hazards.

Show in the manual (page 16)
After each use
Apply anti-corrosion spray oil

Treat metal parts with environmentally friendly biodegradable spray oil after each use to protect against corrosion during storage.

Show in the manual (page 10)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend BH800N?

Yes No

Frequently Asked Questions

A

Insert upper and lower handlebars into the housing and secure them with the provided screws according to the manual diagram. Ensure all connections are tight before operation to ensure stability.

Is this answer helpful?

A

The unit features an 800-watt motor suitable for breaking up earth in small to medium gardens. It provides enough torque for compact soil without being overly heavy.

Is this answer helpful?

A

You must grease the gearbox after the first twenty hours of use, then every forty to fifty hours thereafter to maintain performance. Neglecting this may damage internal parts.

Is this answer helpful?

A

No. The device is not waterproof and should never be operated in wet weather or rain. It can cause electric shock and damage the motor components significantly.

Is this answer helpful?

A

Hold the handle firmly, press the safety button, and pull the switch handle toward the main grip. Release the safety button after startup. Keep others away during this process.

Is this answer helpful?

A

Wear protective goggles, ear protection, and sturdy boots. Avoid loose clothing that could get caught in the rotating tines. This protects against flying debris and noise.

Is this answer helpful?

A

Yes, use only original spare parts listed in the manual. Third-party parts may void the warranty or cause unsafe operating conditions requiring service intervention.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Powerful 800-watt motor handles compacted soil effectively for gardening.
  • Electronic brake stops blades quickly for enhanced user safety
  • Robust gearbox design ensures long-lasting durability and performance
  • Clear instructions in manual simplify setup and maintenance tasks
  • Designed for private gardens offering manageable power levels
VS

Disadvantages

  • Extension cord length may limit reach in larger garden areas
  • Vibration levels require protective gear to prevent fatigue
  • Heavy-duty gearbox requires regular lubrication schedule adherence
  • Blade replacement involves careful handling to avoid injury risk
  • Not suitable for rocky ground or professional agricultural use
M: QW-35-FL

Product Specification

Power

800 W

Working width

11.02 in

Working depth

up to 3.94 in

Features

16 Steel blades

Noise emission

93 dB(A)

Weight

17.42 lbs

M: QW-35-FL

Product Description

Discovering the Atika BH800N Electric Hand Cultivator

Gardening enhances living spaces but manual labor is physically demanding for many people. This is where the Atika BH800N Electric Hand Cultivator Manual becomes essential for dedicated homeowners everywhere. Understanding how to operate this machine safely ensures significantly less physical strain and better gardening results overall for everyone.

Essential Features Overview

The BH800N model is specifically designed for private hobby gardens and plots. It features a powerful 800-watt motor capable of breaking up compacted earth effectively. The device includes a robust industrial gearbox requiring regular lubrication for sustained high-power operation. Safety is paramount, so the unit comes with an electronic brake that stops blades within seconds. Users must read the manual to master safety controls completely before first use begins. The device supports a working width of 280 mm for efficient processing. It is ideal for loosening soil before planting seeds or vegetables.

Assembly and Setup Requirements

Physical assembly requires strict attention to detail for long-term stability. Handlebars must be securely attached to prevent dangerous wobbles during high-speed operation. The manual specifies exact screw types and tightening procedures clearly for users. Electrical safety is critical when connecting the device to a standard mains supply outlet. Operators should use a heavy-duty extension cable with the correct wire gauge to avoid voltage drop and power loss. Always ensure the ground connection is secure before starting work to protect the motor.

Maintenance and Operational Advice

Regular cleaning prevents excessive dirt buildup around the motor housing and tines. After every use, remove soil clumps from the rotating elements immediately. The gearbox needs fresh grease after the first twenty initial hours, then every forty to fifty hours consistently. Proper winter storage extends the life significantly and protects against weather damage. Keeping the unit dry prevents internal corrosion issues over time. Cleaning also helps identify any potential wear or damage early in the lifecycle. Following the detailed guidelines minimizes risks associated with excessive vibration levels during use.

Conclusion

Investing in quality tools simplifies complex gardening tasks effectively for enthusiasts. The Atika BH800N offers a perfect balance between raw power and human manageability in smaller spaces. By adhering strictly to instructions, users enjoy safe and productive gardening seasons yearly around the garden. Always prioritize safety protocols and maintenance routines for long-term reliability and equipment life. Protecting your investment ensures you get maximum value from this excellent tool.

M: QW-35-FL

© Copyright 2026 Manual.ly